ClonerAlliance HDML-Cloner Box Evolve User Manual
HDML-Cloner Box Evolve User Manual
HDML-Cloner Box Evolve User Manual
This documentation describes how to use HDML-Cloner Box Evolve (Model: CA-1180E) device.
Copyright Notice
Copyright © ClonerAlliance Inc. All rights reserved
Documentation Version 1.10
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission
of ClonerAlliance Inc.
Trademarks
HDML® is a registered trademark of ClonerAlliance Inc.
Safety Notices
Before using HDML-Cloner Box Evolve, please ensure that you read and
understand the safety precautions below:
1..
Do not attempt to open the case of HDML-Cloner Box Evolve or modify
it in any way, as this will void the warranty.
2..
Keep HDML-Cloner Box Evolve away from water and other liquids, as
this may cause the unit to malfunction.
3.. HDML-Cloner Box Evolve may become warm during use This does
not indicate malfunction.
4..
Do not place heavy objects on HDML-Cloner Box Evolve, as this may
cause the unit to overheat and malfunction.
5..
If the exterior of HDML-Cloner Box Evolve requires cleaning, wipe it
with a soft dry cloth.
6..
Do not dispose of the unit via conventional domestic waste.
III
Table of Contents
12
14
15
15
15
17
19
20
22
24
28
29
30
30
31
Getting Started
Box Contents
Product Diagram
How to record videos to the USB flash drive/TF card
Connect
Record/Capture
Schedule Recording
Bitrate Setup
How to record videos to PC
System Requirements
Install HDML-Cloner Pro Helper
Connect
Register HDML-Cloner Pro Helper
How to get the registration code of HDML-Cloner Pro Helper?
Menu Navigation
Frequently Asked Questions
Supported Resolutions
Product Specifications
Contact Us
Disclaimer
Index
1
1
2
7
7
8
Getting Started
Box Contents
a b c d
e
f g
™
a. Power Adapter
b..
HDML-Cloner Box Evolve
c.. AV Cable
d..
Micro-USB to USB Cable
e..
Remote Control
f..
User Manual
g..
HDMI Cable
1
Product Diagram
1 2 3
1..
IR: Receives the IR signal from the remote control.
2..
LED light: Three colors are available: white, blue and green. When HDML-Cloner Box Evolve
is turned on, the LED will illuminate white for a while, then blink blue/green alternately and finally
illuminate solid blue or solid green. In the process of recording, the LED will blink blue/white or
green/white alternately. When the recording is stopped, the LED will blink blue/green alternately.
3..
Record/Stop/Wakeup: Press this button to start or stop recording.You can also press this
button to wake up HDML-Cloner Box Evolve when it is sleeping.
2
TF Card
Storage
4 5
4. TF Card: Insert the TF card into this slot and record videos to this storage medium.
5..
Storage: Insert the USB flash drive or mobile hard disk and record videos to this storage medium.
3
6 7 8 9 10 11
6..
5V/2A: Plug the power adapter into this port and power on HDML-Cloner Box Evolve.
7..
1 IN: Connect an HDMI cable between a source video player and HDML-Cloner Box Evolve.
8..
2 IN: Connect an HDMI cable between another source video player and HDML-Cloner Box Evolve.
9. AV/L/R IN: Connect the AV adapter cable between a source video player and HDML-Cloner Box
Evolve.
10. OUT
: Connect an HDMI cable between HDML-Cloner Box Evolve and TV.
11. TO PC: Connect the Micro-USB to USB cable between PC and HDML-Cloner Box Evolve for
recording videos to PC. This function must be realized together with HDML-Cloner Pro Helper.
4
12 13
12.
: Insert the headphone plug into this jack to output the video sound.
13.
: Insert the microphone plug into this jack to input your live voice.
5
REC
STOP
OK
MENU BACK
TIME SOURCE
SCHEDULE
BITRATE
1080p/720p
4:3 16:9
™
: Turn on/Turn off the power of HDML-Cloner Box Evolve.
: Start recording.
: Stop recording.
: Adjust the volume of the source video.
: Adjust the volume of the microphone voice.
: Confirm button.
: Show the main menu or return to the previous menu.
: Back to the home screen.
: Capture an image.
: Mute the video.
: Set the system time.
: Switch the input signal.
: Mute the microphone.
: Set the schedule recording time, start time and frequency.
: Select the recording bitrate.
: Switch the resolution between 1080p and 720p.
: Switch the aspect ratio to 4:3.
: Switch the aspect ratio to 16:9.
Tip:
The remote control is powered by two AAA batteries, which are not included
in the product box and need to be purchased separately.
6
How to record videos to the USB
flash drive/TF card
Tips:
1..
If you insert both the USB flash drive and TF card into HDML-Cloner Box Evolve, the recorded
video will be saved to the storage medium which is connected first.
2..
For better user experience, please use a premium USB flash drive or mobile hard disk with high
quality to avoid problems caused by disk quality.
Connect
7
1. Connect the video player to the "IN" port on HDML-Cloner Box Evolve via an HDMI cable.
2. Connect HDML-Cloner Box Evolve from the "OUT" port to TV via an HDMI cable.
3. Insert the USB flash drive/mobile hard disk or TF card into HDML-Cloner Box Evolve.
4. Plug the power adapter into the power socket and plug the other end into the 5V/2A port
of HDML-Cloner Box Evolve.
Loading...