Cleveland KEL-40-TSH User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
ELECTRIC KETTLES
SHORT SERIES™ ELECTRIC KETTLES
35˝ RIM HEIGHT, TILTING, FULL STEAM JACKETED
SELF-CONTAINED
40 or 60 GALLONS (150 or 225 LITERS)
Cleveland Standard Features
II
Self-contained, easily installed - needs only an electrical hook-up
II
Steam jacket filled with treated water, venting and/or refilling is
not required
II
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance
(ideal for simmering). Operating temperature range from 145° 260°F (63°C - 127°C)
Control panel includes:
• LED indicator for heat cycle • LED indicator for low water
• Power ON/OFF switch • Adjustable temperature control dial
II
Water resistant controls, splash-proof construction
II
Large pouring lip for high capacity and chunky products
II
Re-inforced rolled rim design prevents damage to kettle rim,
eliminates "bar rim designs"
II
Welded-in heating elements, (holds vacuum better, won't leak
or loose water)
II
Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
II
Rear mounted easy access pressure gauge and pressure relief
valve to prevent tampering. Color coded easy to read pressure
gauge with "green" and "vent air zone"
II
50 psi steam jacket rating for higher cooking temperatures
II
50 psi safety valve
II
Solid state water level control (no sight glass gauge to break or leak)
II
Splash proof element cover with a double gasket seal
II
Tilt mechanism of roller bearings and case hardened
self-locking worm and segment gear
II
1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
II
Standard voltage is 208-240 volts, 60 Hz, 3 – phase, 3 wire
II
Typical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
Ë 316 Stainless Steel Liner (316)
Ë 2" Tangent Draw-Off (TD2) (available in 40 gallon only)
Ë Kettle Markings (KM)
Ë Spring Assist Cover (CHS)
Ë Lift Off Cover (CL)
Ë Basket Strainer (BS)
Ë Measuring Strip (MS)
Ë Food Strainer (FS)
Ë Drain Strainer (DS)
Ë Steam Control Kit (SCK1)
Ë 240 Volt, Single Phase Option
Ë Pan Carrier (PCK)
, “SPLASH PROOF SERIES”
MODELS: KEL-40-TSH
KEL-60-TSH
Shown with optional spring-assisted
cover and 2" tangent draw-off valve
Short Form Specifications
Cleveland Electric Tilting Kettle, Model KEL-____-TSH, 35" rim height, Type
304 Stainless Steel and Supports, Fully Steam Jacketed, 50 psi Steam
Jacket Rating
Phase,
Control System in plug-in Module including L.E.D. indicators.
Ë Tri-Basket Strainer Support Systems (TBS)
Ë Kettle Accessory Kit (KAK)
Ë Flow Diverter (FD)
Ë Correctional Packages
Ë Hot and cold water faucet (DPK), or cold water (SPK).
Requires faucet bracket (FBKT)
Ë Heat Deflector Shield (HS001)
, Permanently filled Steam Jacket,
Splash Proof Solid State Temperature (±1° C) and Safety
208-240 volts, 60 Hz, 3
SECT. VIII PAGE 15
0609
DIMENSIONS
SPECIFICATIONS
UTILITIES
FOOT LOCATION &
FLOOR DRAIN DETAIL
(KEL-40-TSH)
FOOT LOCATION &
FLOOR DRAIN DETAIL
(KEL-60-TSH)
FLANGED
FOOT DETAIL
SOLID
FOOT DETAIL
P P
P
48 1/2
45
CAPACITIES: (in 8 oz. servings, other sizes may be calculated)
•
40 Gallon / 150 liters ...... 640 servings
60 Gallon / 225 liters ...... 960 servings
STANDARD WATTAGE
208V 240V 415V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
40 150 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
60 225 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
HIGH WATTAGE
208V 240V 415V 480V
CLEARANCE
RIGHT = 0
LEFT = 0
REAR = 0
Allow 12" minimum on
right side for servicing.
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
40 150 24.5 N/A 68.1 30 N/A 75.3 32.6 68.1 39.3 25.1 66.2 38.2
60 225 29.4 N/A 81.7 39.2 N/A 94.3 39.2 81.7 47.1 30.2 79.4 45.9
Consult factory for other voltages.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
(NOT TO SCALE)
SECT. VIII PAGE 16
0609
Litho in U.S.A.
Loading...