Cleveland KEL-40-SH User Manual
Cleveland
™
P
roject ________________________________
Item __________________________________
Quantity _______________________________
F
CSI Section ____________________________
A
pproval _______________________________
D
ate __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: Steam@ClevelandRange.com
ELECTRIC KETTLES
SHORT SERIES™ ELECTRIC KETTLES
34.8˝ RIM HEIGHT, STATIONARY, FULL STEAM JACKETED
SELF-CONTAINED
40 or 60 GALLONS (150 or 225 LITERS)
Cleveland Standard Features
II
Self-contained, easily installed - needs only an electrical hook-up
II
Steam jacket filled with treated water, venting and/or refilling is
not required
II
Accurate, consistant solid state temperature controls (mechanical thermostate not as accurate) - less than ±1°C variance
(ideal for simmering). Operating temperature range from 145° 260°F (63°C - 127°C)
Control panel includes:
• LED indicator for heat cycle • LED indicator for low water
• Power ON/OFF switch • Adjustable temperature control dial
II
Water resistant controls, splash-proof construction
II
Re-inforced rolled rim design prevents damage to kettle rim,
eliminates "bar rim designs"
II
Welded-in heating elements, (holds vacuum better, won't leak
or loose water)
II
Easily cleaned: kettle and all exterior surfaces are of type 304
stainless steel with an #4 finish
II
Rear mounted easy access pressure gauge and pressure relief
valve to prevent tampering. Color coded easy to read pressure
gauge with "green" and "vent air zone"
II
50 psi steam jacket rating for higher cooking temperatures
II
50 psi safety valve
II
Solid state water level control (no sight glass gauge to break or leak)
II
Faucet mounting bracket
II
2˝ diameter tangent draw-off valve with drain strainer
I
I
Spring-assisted, hinged, rotatable, domed stainless steel cover
II
1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
II
Standard voltage is 208-240 volts, 60 Hz, 3 Phase, 3-wire
II
Typical approvals include UL., CSA, CE, NSF and ASME
Options & Accessories
, “SPLASH PROOF SERIES”
MODELS: KEL-40-SH
KEL-60-SH
Short Form Specifications
Cleveland Electric Stationary Kettle, Model KEL-40SH, 34.8˝ rim
height, 3⁄4 steam jacketed, 50 psi steam jacket rating, Permanently
filled Steam Jacket. Splash-Proof Solid-State Temperature
Controls. 2˝ Tangent Draw-Off Valve with Strainer, Spring-Assist
Cover and Faucet Bracket. Splash Proof Solid State Temperature
(±1° C) and Safety Control System in plug-in Module including
L.E.D. indicators.
Ë 316 Stainless Steel Interior Liner (316G)
Ë 3" diameter Tangent Draw-Off Valve w/Strainer (TD3),
for 60 gallon only
Ë Hot & Cold Water Faucet (DPK)
Ë Kettle Accessory Kit (KAK)
Ë Tri-Basket Strainer Support Systems (TBS)
Ë Kettles Markings (KM)
Ë Measuring Strips (MS)
Ë Voltages other than standard (VOS)
Ë Correctional Packages
Ë High Wattage (HW) (see back page)
Ë Heat Deflector Shield (HS001)
Ë Insulated Outer Jacket (IOJ)
SECT. VIII PAGE 17
0609
RECOMMENDED
F
LOOR SLOPE
1
" (26 mm) per 4' (1220 mm)
PIPE DRAIN RECOMMENDED
min. valve size plus 1" (26 mm)
4" (102 mm)
RECOMMENDED
9/16"
14
mm
120º
TYP
1" (25
mm)
MAX. ADJUSTMENT
1 5/8" (42 mm)
Ø
FLANGED FOOT DETAIL
7/16" (11 mm)
Ø
3
HOLES ON
3 1/8" (80
mm)
Ø
B
.C.D.
4
7/8"
124
Ø mm
H
C
DIMENSIONS
GALS./
LITERS ACDE FGH J KLMOPQR
40/ IN 29 1/2 35 7/8 38 44 14 67 3/8 11 7/16 34 1/2 9 1/2 15 1/2 8 7/8 43 5 13/16 25 5/8 22 7/8
150 mm 750 911 965 1118 356 1712 291 876 242 394 225 1,092 148 651 582
60/ IN 33 35 7/8 41 1/4 47 1/4 10 1/4 72 12 15/16 38 11 1/4 17 1/4 6 3/4 46 5 9/16 28 25 7/8
225 mm 839 911 1048 1200 260 1829 329 965 286 439 171 1,168 141 711 65
STANDARD WATTAGE
208V 240V 415V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
40 150 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
60 225 14.7 70.8 40.9 19.6 81.7 47.1 18.1 43.5 25.1 19.6 40.8 23.6
HIGH WATTAGE
208V 240V 415V 480V
AMPS AMPS AMPS AMPS AMPS AMPS AMPS AMPS
GALS. LITERS KW 1PH 3PH KW 1PH 3PH KW 1PH 3PH KW 1 PH 3PH
40 150 24.5 N/A 68.1 30 N/A 75.3 32.6 68.1 39.3 25.1 66.2 38.2
60 225 29.4 N/A 81.7 39.2 N/A 94.3 39.2 81.7 47.1 30.2 79.4 45.9
CAPACITIES:
•
(in 8 oz. servings, other sizes may be calculated)
40 Gallon / 150 liters .......... 640 servings
60 Gallon / 225 liters .......... 960 servings
SHIPPING
WEIGHT (LBS.)
KEL-40-SH = 330
KEL-60-SH = 370
Consult factory for other voltages.
NOTES:
Cleveland Range reserves right of design improvement or modification, as warranted.
Many regional, state and local codes exist and it is the responsibility of the owner and installer to comply with the codes.
Cleveland Range equipment is built to comply with applicable standards for manufacturers. Included among those approval agencies are U.L., NSF, CGA, CSA, ETL and others.
WATER
3
⁄8˝ O.D. copper tube or
1
⁄2˝ N.P.T. pipe.
When ordered with
optional faucet.
CLEARANCE
RIGHT = 0
LEFT = 0
REAR = 0
Allow 12" minimum on
right side for servicing
(NOT TO SCALE)
SECT. VIII PAGE 18
Litho in U.S.A.
0609
Loading...