Cleveland 22CET6.1, 22CET3.1 User Manual

Installation Manual

1333 East 179

Street

PATENT PENDING

Energy Star SteamChef Models 22CET3.1 and 22CET6.1

Cleveland, Ohio 44110

Phone: (216) 481 - 4900

1-800-338-2204

Fax: (216) 481 - 3782

www.clevelandrange.com

Part No. 22CET(ES)-INM REV. C 5/07

FOR YOUR SAFETY

Do not store or use gasoline

ELECTRI

C SHOCK HAZARD

Do not connect the drain connection to any drain material that

This appliance is constantly hot whenever the main power lever is ON, the door i

temperature in the cooking compartment.

or other flammable vapors or liquids in the vicinity of this or any other appliance.

Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

DEATH, INJURY, or EQUIPMENT DAMAGE can result from touching any component inside this appliance when the power is connected. Whenever possible disconnect the power while installing, servicing, or testing. When installation, service, or tests require power to be connected; use extreme caution and every possible precaution and safety measure while installing, servicing, or testing this appliance.

cannot sustain 180o Fahrenheit.

Using drain material that cannot withstand 180o Fahrenheit can

result in injury, equipment damage, and property damage.

WARNING

closed and the reservoir is filled with water. When the selector switch of this appliance is turned to the OFF position, this appliance remains hot by maintaining the Standby

ALL SERVICE MUST BE PERFORMED BY A QUALIFIED

CLEVELAND RANGE AUTHORIZED TECHNICIAN

KEEP THIS MANUAL FOR REFERENCE

This manual may be subject to new technical developments, modifications, and unforeseen errors.

DO NOT INSTALL OR OPERATE OR ATTEMPT TO INSTALL OR OPERATE THIS APPLIANCE OR ANY

ACCESSORIES WITHOUT READING COMPLETELY AND FULLY UNDERSTANDING THIS MANUAL

Cleveland Range appliances are intended for other than household use.

Cleveland STATEMENT OF POLICIES

L I M I T E D W A R R A N T Y

CLEVELAND RANGE products are warranted to the original purchaser to be free from defects in materials and workmanship under normal use and service for the standard warranty period of one year from date of installation or 18 months from date of shipment, which ever comes first.

CLEVELAND RANGE agrees to repair or replace, at its option, f.o.b. factory, any part which proves to be defective due to defects in material or workmanship during the warranty period, providing the equipment has been unaltered, and has been PROPERLY INSTALLED, MAINTAINED, AND OPERATED IN ACCORDANCE WITH THE CLEVELAND RANGE OWNER’S MANUAL.

CLEVELAND RANGE agrees to pay any FACTORY AUTHORIZED EQUIPMENT SERVICE AGENCY (within the continental United States, and Hawaii) for reasonable labor required to repair or replace, at our option, f.o.b. factory, any part which proves to be defective due to defects in material or workmanship, during the labor warranty period. This warranty includes travel time not to exceed two hours and mileage not to exceed 50 miles (100 miles round-trip), BUT DOES NOT INCLUDE POST START-UP, TIGHTENING LOOSE FITTINGS, MINOR ADJUSTMENTS, MAINTENANCE, CLEANING OR DESCALING.

The standard labor warranty allows factory payment of reasonable labor required to repair or replace such defective parts. Cleveland Range will not reimburse the expense of labor required for the repair or replacement of parts after the standard warranty period, unless an Extended Labor Warranty Contract has been purchased to cover the equipment for the balance of the warranty period from the date of equipment installation, start-up, or demonstration.

PROPER INSTALLATION IS THE RESPONSIBILITY OF THE DEALER, THE OWNER-USER, OR INSTALLING CONTRACTOR, AND IS NOT COVERED BY THIS WARRANTY. Many local codes exist, and it is the responsibility of the owner and installer to comply with these codes. Cleveland Range equipment is built to comply with applicable standards for manufacturers, including UL, ANSI, NSF, ASME/Ntl. Bd., CSA, and others.

BOILER (Steam Generator) MAINTENANCE IS THE RESPONSIBILITY OF THE OWNER-USER AND IS NOT COVERED BY THIS WARRANTY. The use of good quality feed water is the responsibility of the Owner-User (see Water Quality Recommendations below). THE USE OF POOR QUALITY FEED WATER WILL VOID EQUIPMENT WARRANTIES. Boiler maintenance supplies, including boiler hand hole gaskets, are not warranted beyond the first 90 days after the date the equipment is placed into service. Preventive maintenance records must be available showing descaling per applicable Cleveland Operator Manual for Boiler Proration Program considerations.

WATER QUALITY RECOMMENDATIONS

TOTAL DISSOLVED SOLIDS less than 60 parts per million TOTAL ALKALINITY less than 20 parts per million SILICA less than 13 parts per million CHLORIDE less than 30 parts per million pH FACTOR greater than 7.5

The foregoing shall constitute the sole and exclusive remedy of original purchaser and the full liability of Cleveland Range for any breach of warranty. THE FOREGOING IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR IMPLIED, INCLUDING ANY WARRANTY OF PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR PURPOSE, AND SUPERSEDES AND EXCLUDES ANY ORAL WARRANTIES OR REPRESENTATIONS, OR WRITTEN WARRANTIES OR REPRESENTATIONS, NOT EXPRESSLY DESIGNATED IN WRITING AS A “WARRANTY” OR “GUARANTEE” OF CLEVELAND RANGE MADE OR IMPLIED IN ANY MANUAL, LITERATURE, ADVERTISING BROCHURE OR OTHER MATERIALS.

CLEVELAND RANGE’S liability on any claim of any kind, including negligence, with respect to the goods or services covered hereunder, shall in no case exceed the price of the goods or services, or part thereof, which gives rise to the claim. IN NO EVENT SHALL CLEVELAND RANGE BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES IN THE NATURE OF PENALTIES.

LIMITED EXTENDED WARRANTY COVERAGE

The purchase of a Limited Extended Warranty Contract extends the standard warranty coverage to the purchased period of time (one to two years) from the date of installation, start-up, or demonstration, whichever is sooner.

*An additional two years Parts and Labor Warranty can be purchased with each piece of Cleveland equipment for an additional 2% of the List Price per year. The 2% of list price charge will be the net invoice amount for each year of extended warranty purchased.

- Extended warranty must be purchased at the same time the equipment is purchased.

- Extended Warranty has the same exclusions as stated in our standard warranty.

Second year limited extended warranty coverage on Cleveland Steamers when purchased with a water filter applies to water related components only.

INSTALLATION MANUAL

SteamChef 22CET3.1 and 22CET6.1

Table of Contents

Chapter.....................................................................................................................Page

1 Product Information ................................................................................................... 1

A. Product Information ............................................................................................................................ 1

B. Product Information Plate ..................................................................................................................1

2 General Information ................................................................................................... 2

A. Laws, Codes, and Regulations ..........................................................................................................2

B. Inspect for Shipping Damage ............................................................................................................ 2

C. Product Views...................................................................................................................................... 3

3 Installation .................................................................................................................. 5

A. Select a Location................................................................................................................................. 5

B. Installation of a SteamChef 22CET3.1 or 22CET6.1......................................................................... 6

C. Install the Legs .................................................................................................................................... 7

D. Position and Level the 22CET ............................................................................................................ 7

E. Install the KleanShield™..................................................................................................................... 7

F. Install the Fan Guard and Air Diverter ............................................................................................... 8

G. Install the Slide Racks (Pan Racks)................................................................................................... 8

H. Install the Rear Vent............................................................................................................................ 9

I. Connect the Free Air Vented Drain Line ............................................................................................. 9

J. Water Supply Requirements and Installation.................................................................................. 11

K. Electric Power Supply ...................................................................................................................... 13

L. Installation Checklist......................................................................................................................... 14

4 Operating Tests ........................................................................................................ 15

A. Startup Procedure ............................................................................................................................. 15

B. Drain Rinse Inspection .....................................................................................................................16

C. Operating Tests and Final Checkout Procedure ............................................................................ 16

D. Shutdown ........................................................................................................................................... 18

5 Installer’s Troubleshooting Guide .......................................................................... 19

CHAPTER 1 PRODUCT INFORMATION

A. Product Information

• This manual covers the installation of 22CET3.1 and 22CET6.1 SteamChef Steam Cookers (steamers), and their standard features and options.

• Other than selection of options, there are presently no significant design, parts, or operating differences among appliances with this model number.

• Figures 2-1 and 2-2 illustrate the dimensions, clearances, and major external features of 22CET’s.

B. Product Information Plate

The Product Information Plate on the back of the appliance lists:

• Model

• Serial Number

• Power and Wiring Requirements

CHAPTER 2 GENERAL INFORMATION

A. Laws, Codes, and Regulations

This equipment should be installed only by qualified, professional plumbers, pipe fitters, and electricians.

1. The installation of this appliance must conform with: a. The National Electrical Code, ANSI/NFPA 70 (latest edition), or the Canadian Electrical

Code, CSA C22.2, or local codes, as applicable.

• When installed, the appliance must be electrically grounded in accordance with the above.

• NOTE: This appliance is not GFI (GFCI) compatible.

b. The Food Code (latest edition) of the Food and Drug Administration (FDA).

2. This equipment is to be installed to comply with the applicable federal, state, or local plumbing codes.

3. Installation instructions must be read in their entirety before starting installation of this appliance.

4. Install this appliance according to the policies and procedures outlined in this manual.

5. Installation must comply with all local fire and health codes.

Improper installation, adjustment, alteration, service, or maintenance of this appliance, or installation of a damaged appliance can result in DEATH, INJURY, EQUIPMENT DAMAGE, and void the warranty.

NEVER install damaged appliances, equipment, or accessories. ALWAYS have installation and service performed by qualified Cleveland Range authorized personnel.

B. Inspect for Shipping Damage

• If the appliance is damaged or damage is suspected:

1. Submit a Damage Claim to the Shipper immediately.

2. Inform your dealer at once.

3. Inform Cleveland Range in writing within three (3) days.

C. Product Views

Figure 2

-1 SteamChef 3

Dimensions and Clearances

22.395

18.359

21.625

28.000

30.177

32.162

30.177

22.395

21.625

3.000

90°

12.000

24.000

+ 18 hidden pages