ClearSounds QH2 User Manual
QH2 BLUETOOTH PHONE HUB SYSTEM
USER'S GUIDE
1
Welcome!
Thank you for purchasing the ClearSounds QH2 Bluetooth Phone Hub System.
We hope that you enjoy the hands-free conversation that your new system provides. The hub amplies and sends sound between
phones and Bluetooth® headsets, streamers or neckloops.
• Hands-free conversation within 30 feet of the hub
• Answer or place calls without lifting the handset from the base.
• Tone adjustment
• Compatible with Bluetooth listening devices (headsets, streamers or neckloops)
• Compatible with all telephones with keys on the base and with all cordless phones
Contact information
Please contact us with any questions that you might have. We are happy to assist you!
ClearSounds Communications, Inc.
1743 Quincy Avenue, Suite 155
Naperville, IL 60540 USA
800-965-9043 (toll-free)
www.clearsounds.com
2
Carefully read and observe the warnings and cautions in this manual and on the equipment.
Warnings
Warnings must be observed to prevent bodily injury.
WARNING: Use the equipment only in the described manner to avoid bodily injury or damage to the equipment.
WARNING: Locate and use the hub away from water and damp areas, such as swimming pools, bathtubs, sinks and damp
basements, and do not use the hub when you are wet, to avoid electrical shock. If the hub is submerged, unplug the base from
AC power before you retrieve it.
WARNING: Do not overload extension cords or power strips. This can result in electric shock.
WARNING: Use this hub only with the supplied AC power adapter assembly. Other types of power adapter assemblies can
damage the hub and cause personal injury.
WARNING: Avoid using the hub with a corded phone during an electrical storm. There is a slight risk of electrical shock from
lightning during a storm.
WARNING: The hub can amplify volume that can cause hearing loss. For each user, adjust the volume to personal preferences.
WARNING: Do not spill liquid on the hub or clean it while it is plugged in to AC power. This can cause a short circuit, a re or
electric shock.
WARNING: Do not push any type of object into the hub. Contact with dangerous voltage points can occur, resulting in re,
electric shock or parts damage.
Safety precautions
3
WARNING: Do not disassemble the hub. Dangerous voltages or other risks can occur. Use after incorrect reassembly can lead
to electric shock.
Cautions
Cautions indicate practices that could harm the hub or other objects.
CAUTION: Do not place objects on the cables or cords, and place them away from foot trafc.
CAUTION: Locate the hub away from heat sources of any type. Keep slots and openings on the components uncovered to
enable ventilation and protection against overheating.
CAUTION: Connect the supplied AC power adapter assembly into a surge protector. Power surges can damage the equipment.
CAUTION: Use only a damp cloth to clean the unit. Do not use liquid or aerosol cleaners.
CAUTION: In these circumstances, unplug the hub from AC power, and refer to qualied service personnel:
• Liquid spills in the hub, or it is exposed to rain or precipitation.
• The hub does not operate according to descriptions in this manual, or performance distinctly changes.
• The hub is dropped or the casing is damaged.
4
Contents
Contents
Setup .............................................................................................................................................................................................5
Unpack ................................................................................................................................................................................... 5
Install the hub ......................................................................................................................................................................... 6
Bluetooth pairing and disconnection .................................................................................................................................... 13
Answer or place a call .................................................................................................................................................................15
Answer or place a call using a corded phone system .......................................................................................................... 15
Answer or place a call using a cordless phone system ........................................................................................................ 17
Troubleshooting ...........................................................................................................................................................................20
Compliance..................................................................................................................................................................................21
Specications ..............................................................................................................................................................................24
Warranty ......................................................................................................................................................................................25
Accessories .................................................................................................................................................................................26
5
Setup
Unpack
Ensure that your packing box includes all of these parts. If any parts are missing or damaged, please contact your vendor or ClearSounds.
IMPORTANT: YOUR RECEIPT IS REQUIRED FOR WARRANTY. PLEASE RETAIN YOUR RECEIPT.
Hub Hub-to-lifter cable
Handset lifter with two
additional tape pieces
AC adapter
Hub-to-base cable
Phone line splitter and Hub-tosplitter cable
6
Setup
Install the hub
You can use the QH2 system with these types of telephones.
• Corded phone with keys on the base and a handset connected with a curly cord
• Cordless phone
To install the hub for use with a corded phone
To answer and place calls, the handset lifter removes the handset from the phone. The instructions in this section include steps for
installing the handset lifter on your phone.
Note: You do not need to install the lifter if either of these conditions apply to you:
• You prefer to lift and replace the handset manually.
• Your phone includes a headset mode feature. In headset mode, you can connect to a Bluetooth listening device without
lifting the handset. If you want to use your telephone's headset mode, consult your telephone user's manual for instructions.
7
2a
2b
1d
2c
Loading...