ClearOne MAXAttach IP User Manual

Expandable VoIP Tabletop Conferencing Phone
The industry's first fully expandable SIP-based VoIP tabletop conference phone. The MAXAttach IP and MAX IP audio conferencing phones deliver unrivaled audio clarity and room coverage for your VoIP phone system. With ClearOne's advanced audio processing technologies, advanced SIP features, and the ability to daisy chain up to four phones, they deliver outstanding audio conferencing value.
UNRIVALED AUDIO QUALITY, FLEXIBILITY AND AFFORDABILITY
APPLICATIONS
Executive Office
Small Conference Room
Medium Conference Room
Large Conference Room
Training Room
Separate Rooms (MAXAttach IP phones can be separated for use in different rooms)
ADVANTAGES
Superior Audio Performance
+ High-quality full duplex sound enables participants to speak and listen at the
same time without cutting in and out
+ Distributed Echo Cancellation® effectively eliminates echo + Noise cancellation removes background noises from fans or HVAC systems + Automatic level controls keep participants' audio balanced and consistent + First-mic priority eliminates hollow "tunnel" sound by activating only the
microphone closest to the person speaking
+ Three microphones provide 360° audio pickup
Expandability
+ MAXAttach IP comes with two phones and can expand up to four complete
linked phones
+ MAX IP comes with a single phone and can also expand up to four complete
linked phones
+ Linked phones provide multiple loudspeakers, multiple microphones, and
multiple dial pads for unrivaled room coverage
SIP Feature Set
+ Connect to a wide variety of SIP platforms + VLAN tagging allows for bandwidth management & secure separation of voice
& data networks
+ 3-way calling allows for ad-hoc conferences without need for conference
bridge
+ TLS & SRTP encryption-ready (with future release of firmware upgrade) -
secures voice communications over the network
Ease of Use & Control
+ Field upgradeable for easy access to latest features + User-friendly telephone style controls + Selectable ring tones + Linked MAX IP phones can be operated using the dial pad of any phone -
dialing, mute, volume controls, etc.
TABLETOP CONFERENCING
DATA SHEET
<
MAXAttach IP™|MAX™ IP
>
SPECIFICATIONS
Call Features
Call hold 3-way calling Speed dial Mute Redial Configurable dial plan
Features
TFTP provisioning DHCP
DNS SNTP HTTP web configuration
Dynamic firmware upgrade
SIP Support
Audio codecs
G.729A/B G.723.1
G.711 RTP/RTCP SDP TCP & UDP transport SIP proxy registration Outbound proxy support
Networking Features
VLAN tagging & priority DIFFSERVE codepoint (DSCP)
packet tagging for QOS
Echo Cancellation
Tail time: 128 ms x 3
Noise Cancellation
Dynamic noise cancellation
Network Connection
10/100 Ethernet RJ-45
Keypad
Alphanumeric standard keypad
Loudspeaker
Volume: 90dBspl A weighted @ 1 ft Bandwidth: 200 Hz–3.3 kHz
Record Output
Connector: 2.5 mm mono audio jack Impedance: <1000 ohms Bandwidth: 200 Hz–3.3 kHz Dynamic range: 60 dB THD <.01%
Certifications
FCC part 15 Class A UL Certified
Power
Base unit: Auto-adjusting power module; 100-240 VAC; 50/60 Hz
Environmental
Operating temperature: 32–122° F (0–50° C) Storage temperature: 41–158° F (5–70° C) Operating humidity: 15 to 80% Storage humidity: 10 to 90%
Dimensions (W x D x H)
Phone unit: 10.5” x 10.5” x 3” (26.7 cm x 26.7 cm x 7.6 cm) Base unit: 4.25” x 5.5” x 2.5” (10.8 cm x 14 cm x 6.4 cm)
Weight
Phone unit: 2.7 lb (1.2 kg) Base unit: .6 lb (0.27 kg) Shipping: 10 lb (4.5 kg)
PART NUMBERS
MAX IP
910-158-301
Includes: MAX IP phone unit (1) MAX IP base unit (1) 25’ keyed cable (1) 7’ Ethernet cable (1) Documentation CD
MAXAttach IP
910-158-355
Includes: MAX IP phone units (2) MAX IP base unit (1) 12’ keyed cable (1) 25’ keyed cable (1) 7’ Ethernet cable (1) Documentation CD
MAX IP Expansion Kit
910-158-350
Includes: MAX IP phone unit (1) 12’ keyed cable (1) Documentation CD
MAX IP Base Kit
910-158-345
Includes: MAX IP base unit (1) 25’ keyed cable (1) 7’ Ethernet cable Documentation CD
tiK esaB PI XAMstiK .pxE 2 + PI hcattAXAMtiK .pxE 1 + PI hcattAXAMPI ™hcattAXAMPI XAM
MAX IP Expansion Kit
Use with any MAX IP phone to expand coverage up to 4 total units. Includes phone and connecting cable, no base unit.
MAX®Tabletop Conference Phones DATA SHEET
<
>
CLEARONE LOCATIONS
Headquarters: Salt Lake City, UT USA
5225 Wiley Post Way Suite 500 Salt Lake City, UT 84116 Tel: 801-975-7200 800-945-7730 Fax: 801-977-0087 sales@clearone.com
Latin America
Tel: 801-974-3621
global@clearone.com
EMEA
Tel: 44 (0) 1189 036 053
global@clearone.com
APAC
Tel: 801-303-3388
global@clearone.com
© 2007 ClearOne Communications Inc. All rights reserved. Other product names may be trademarks of their respective owners. Information in this document subject to change without notice. 802-158-300 Revision 1.3
>
ROOM APPLICATIONS
Enables MAXAttach IP and MAX IP
phones to be used in separate
rooms. Includes base unit and 25’ cable.
Loading...