Clear-Com RS-701 User Manual
DIP Switch settings
* = defaults
1 Select
* ON = Dynamic
* OFF = Electret
2 Headset Output Level
* ON = High
* OFF = Low
3 Min Volume
* ON = Silent at min level
* OFF = Not silent at min level
4 LEDs On/Off
* ON = LEDs normal operation
* OFF = All LEDs dark
5 Call-on Talk Enable
* ON = Call occurs when talk on
* OFF = No call when talk on
6 Talk Latch Enable
* ON = Latch enabled
* OFF = Latch disabled
Headset connector pins
1
2
3
4 Spkr+ / DC+ (15V
20mA)
DIP switch
Sidetone adjustment
Use small, flat-blade screwdriver
to adjust screw inside hole.
Loosen slotted screw inside
keyhole in belt clip, on back of
beltpack.
Swivel belt clip and slide it up
and down to expose DIP switch
and sidetone adjustment.
Intercom connector pins
1
2
(
3 Signal
DIP Switch settings & Sidetone adjustment
Common
Power
15V-30V)
Mic− / DC−
Mic+
Spkr−
nom
Cut
Cut
Cut
Cut
Fold
Fold
The Clear-Com product that you have purchased is covered by the Clear-Com
Standard Limited Warranty, the terms and conditions of which can be found at
www.clearcom.com/support/warranty-support-policies
We encourage you to review the Standard Limited Warranty to determine its
coverage, exclusions from coverage and duration.
EXCEPT AS SET FORTH IN THE STANDARD LIMITED WARRANTY,
CLEAR-COM MAKES NO WARRANTIES REGARDING THE PRODUCT,
EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION
ANY WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF
THIRD PARTY RIGHTS, OR FITNESS FOR A PARTICULAR PURPOSE, ALL
OF WHICH ARE EXPRESSLY DISCLAIMED.
For your own records, complete the
following information:
____________________________
Serial number
____________________________
Purchase date
____________________________
Reseller
RS-701
REFERENCE
Controls, LEDs & Connectors
1
2
Press and hold while talking, or tap to latch on
3
4
5
6
7
(3-pin XLR female)
8
(3-pin XLR male)
9
(4-pin XLR male)
Final assembly in U.S.A.
1
2 3 4 5
6
7 8 9
Headset cable receptacle
Intercom cable receptacle
Intercom cable receptacle
.
Power LED – lit while beltpack power is on
Call button – alerts all on intercom channel
Call LED – lights when call button is pressed
Talk LED – lights when intercom channel active
Talk button – talk to all on intercom channel
Volume control – rotates to adjust volume level
BELTPACK
QUICK
GUIDE
www.clearcom.com
HME# 399G034
Rev A 3/20/13
Loading...