Clear-Com CZ-DX410-4UP User Manual

Integrated

Wired,

Wireless & IP

PRODUCT BROCHURE

Communications

Eclipse® HX Matrix Intercom

V-Series Keypanels

Agent-IC

Integrated FreeSpeak II

Clear-Com Concert Virtual Panel

Interactive IFB Controls

®

Mobile App

®

Wireless

Dynam-EC

Connectivity Solutions

INTEGRATED WIRED, WIRELESS & IP COMMUNICATIONS

About Intercom Technology

An intercom (intercommunication system) is a standalone, closed-circuit system for
one-way “simplex” and/or two-way “duplex” communication. The general purpose of a
professional intercom system is to facilitate simple to complex communication setups
for few to thousands of users who need to be continuously on talk and/or listen
mode. Two-way communications systems can operate in half-duplex or full-duplex. With
half-duplex systems, one party talks while the other party listens. With full-duplex
systems, both parties can talk and listen at the same time as if they are in a natural
conversation in person.

Users who have different roles in a particular operation can be in a conference or
partyline together. Or they can be sub-divided into a matrix of independent groups in
any one or many private intercom channels. In addition to establishing communication
points, an intercom system can also be interfaced with third-party devices such as
2-way radios, 4-wire audios, telephone, TV cameras, AES3 digital audio, relay control
(for signal light activation or door control), etc.

The core technology of an intercom system could be based on one of the following
platforms: 2-wire/analog, 4-wire digital, wireless, or IP networks. The decision to
deploy one platform over the other will greatly depend on requirements, environment
and budget. These intercom platforms operate independently or can be linked to form

a larger system in order to meet specic unique communication workow needs.

Moreover, intercom systems can be bridged together with different communications
systems as part of a multi-platform solution.

In certain applications, intercom systems need to be geographically distributed to

support the various communication positions in a given workow. Therefore, they

can be connected over 2-wire or 4-wire; MADI for close-distance connections such

as oor-to-oor; optical ber for short to long distances within a building; and IP

networks (LAN, WAN, or Internet) for connections across a wide area, across town,
or across the country.

INTEGRATED WIRED, WIRELESS & IP COMMUNICATIONSINTEGRATED WIRED, WIRELESS & IP COMMUNICATIONS

Table of Contents

Eclipse® HX is the advanced digital matrix intercom platform
for enabling critical communication among work teams.
The system enables direct (point-to-point) and one-to-many
(group and partyline or conference) connections. It is highly
exible and extensible for large scale installations. Eclipse HX
can also seamlessly integrate with IP communications,
interoperability and SIP telephony interfaces, digital wireless
solutions, and many other devices.

pg 4

Matrix System Frames & Cards

Point-to-point and conference communications systems for supporting thousands
of user connections on networked wired intercom systems.

pg 6

Communication Points

A range of user control options such as the V-Series and i-Series hardwire key
panels, FreeSpeak II digital wireless beltpacks, Agent-IC mobile app and
Clear-Com Concert virtual panels for accessing Eclipse HX.

pg 9

Advanced Live Controls

Interactive IFB assignment and management, Dynam-EC for real-time exible

and fast audio and conference routing.

pg 10

Interfaces, Interface Frames and Modules

Interface modules for linking to other matrices and remote panel users. Stand­alone interfaces for connection to external audio, digital and telecom devices.
Interface frames for holding interface modules.

pg 13

System Management

Eclipse EHX system conguration and administration, Logic Maestro for conditional

routing and signaling, and HCI for third-party control, automation and status.

pg 16

Connectivity Solutions

Intercom Connectivity Solutions for linking intercom systems over IP networks;
routing and distributing signals from intercom, audio and control data over optical

ber networks; and interfacing communications solutions with SIP telephony

protocols, 2-way radios and mobile devices.

pg 18

Intercom Accessories

Compatible microphones and headsets for matrix intercom.

Clear-Com | 3

INTEGRATED WIRED, WIRELESS & IP COMMUNICATIONS

DIGITAL MATRIX INTERCOM

Eclipse HX digital matrix intercom systems provide a reliable and exible communications

backbone for non-blocking distribution of audio and data signals across thousands of users
within a communications network. All systems can intelligently trunk over IP (Dante, AES67
and native), redundant Fiber, MADI and audio CAT5 without compromising audio quality or
performance. Eclipse HX delivers high system performance, intuitive management software,
and high capacity for meeting sophisticated communication applications.

System Frames

Eclipse HX can support thousands
of user connections on a networked,
64-matrix system. Designed and
engineered to meet a wide variety
of communication needs.

Clear-Com Eclipse HX is unrivaled
in speed of performance, extensibility
and scalability.

Eclipse HX-Omega, -Median, -Delta

and -PiCo Matrices provide a exible

and scalable communications back­bone for point-to-point, partyline or
conference communications.

Eclipse HX-PiCo

Eclipse HX-PiCo Eclipse HX-Delta Eclipse HX-Median Eclipse HX-Omega

Dimensions 1RU x 330mm (1.2 inch) 3RU x 420mm (16.5 inch) 6RU x 300mm (11.5 inch)

Card slots Fixed, 1 CPU and 36 ports 2 CPU and 4 slots 2 CPU and 7 slots

Maximum number of ports 36 256 448

Maximum system size 16 frames (if PiCo only) 64 frames (any combination) 64 frames (any combination)

Redundancy options Dual AC AC, DC, CPU, LAN, Trunking AC, CPU, LAN, Trunking

Networking / Linking 4-wire 4-wire, Fiber, Dante, AES67,

IP, MADI, E1, T1

System interfacing 4W, 2W, POTS, SIP, IP, GPIO 4W, 2W, POTS, SIP, IP,

FreeSpeak II, MADI, GPIO

Remote IP Users/Trunking Via LQ Series IP interface IP panels, IP mobile clients

and trunking to other frames

Live operations EHX & Dynam-EC EHX & Dynam-EC EHX & Dynam-EC

Eclipse HX-Median

4-wire, Fiber, Dante, AES67,
IP, MADI, E1, T1

4W, 2W, POTS, SIP, IP,
FreeSpeak II, MADI, GPIO

IP panels, IP mobile clients
and trunking to other frames

Eclipse HX-OmegaEclipse HX-Delta

6RU x 410mm (16 inch)

2 CPU and 15 slots

512

64 frames (any combination)

AC, CPU, LAN, Trunking

4-wire, Fiber, Dante, AES67,
IP, MADI, E1, T1

4W, 2W, POTS, SIP, IP,
FreeSpeak II, MADI, GPIO

IP panels, IP mobile clients
and trunking to other frames

EHX & Dynam-EC

4 | Clear-Com

INTEGRATED WIRED, WIRELESS & IP COMMUNICATIONSINTEGRATED WIRED, WIRELESS & IP COMMUNICATIONS

System Frame Cards

Interface frame cards for the Eclipse HX-Delta, Eclipse HX-Median and Eclipse HX-Omega systems
to establish intelligent connections.

MVX-A16-HX Card

A 16-port audio and data card for use
with panels, interface modules and
direct ports using balanced 4-wire
audio and RS422 data interfacing.

E-QUE-HX Card

A wireless cell controller card that
can seamlessly connect FreeSpeak II
digital wireless beltpacks to the Eclipse
HX matrix system for untethered
communications. Alternately, the card
can provide E1 and T1 intelligent
linking to interconnect matrix frames
with signaling.

IVC-32-HX Card

The IVC-32-HX supports up to 32
channels of high quality, low latency
audio over IP interconnection. Each
channel can be independently

congured for connecting to V-Series

panels, Agent-IC, Eclipse HX systems,
LQ Series or Concert soft clients. The
card uses the highly regarded G.722
audio CODEC and is designed to
operate seamlessly over LAN, WAN
and Internet infrastructures.

E-FIB-HX Card

The Fiber card enables dual redundant
audio ber network connections to 63
other frames. Comes with a standard
SFP transceiver housing allowing

different ber options. Single Mode

transceivers supplied.

E-MADI64-HX Card

The E-MADI64-HX (Multiple Audio
Digital Interface) card provides
connection with standard MADI
devices, with up to 64 AES3 format
digital audio “4-wires”. The card can

be congured for 24, 32, 48, 56 or the

full 64 channels with sample rates up
to 96kHz. It can also connect V-Series
panels over MADI.

LMC-64-HX Card

The IP-based audio level monitor card
enables the Dynam-EC application to
use Clear-Vu Audio Metering for up
to 64 channels per card. Using two
standard scaling options, Nordic and
VU, the LMC-64-HX Card enables easy
and rapid audio adjustments for any
critical application.

N+1 card redundancy is supported,
enabling a single IVC-32-HX card to
operate as a hot standby for other
IVC-32-HX cards in the matrix frame.

IVC-32-HX makes extending intercom
access to new users, in local or remote
locations, both straightforward and
cost-effective.

Note: Restrictions based on power supply set the
allowable quantity of IVC-32-HX and E-QUE-HX cards.

E-Dante64-HX Card

A 64-channel Dante interface card
connects Eclipse HX to multiple Dante
network congurations and provides
a low-latency, high quality AoIP inter­connection. The card is also AES67
compatible for supporting multiple
AES67 audio streams in IP Video.

Clear-Com | 5

INTEGRATED WIRED, WIRELESS & IP COMMUNICATIONS

Communication Points

Users of Eclipse HX can access the central intercom system using various types of communications
devices: hardware key panels, portable digital wireless beltpacks, mobile apps on smartphone/tablet
devices, or integrated software client on a personal computer.

V-Series Key Panels

Available in Rotary,
Lever and Pushbutton.

12-Key Pushbutton Panel

12-Key Rotary Desktop Panel

Broadest variations in form:

• Rotary, Lever or Pushbutton keys

• Rack panel or portable desktop panel

• 12, 16*, 24, or 32* keys

*Lever panels only

i-Series Key Panels

i-1200E

Distinctive and extensive
graphic display:

• High contrast yellow OLEDs

• 10-character displays

• International character fonts

• Supports Roman English and European
character fonts and Cyrillic, Chinese,
Japanese and Arabic fonts

• Dual label facility

• Horizontal or vertical text display

i-1430E

32-Key Lever Panel

Unique panel features:

• Native multi-channel IP connectivity
built in

• 8 shift pages within panel, and up
to 8 expansion panels

• “Listen Again” digital memory for
30-second audio replay

• Digital Signal Processing (DSP)
for audio routing and equalization

• Scroll assignment for quick and easy
key changes at panel

• Supervisor capability

• Color tallies for IFB and partyline
keys (Rotary panels only)

e-1410E

i-1400E

Seven standard variants available:

i-1110E 1x8-key display, gooseneck

and headset connections and loud­speaker with level controls (not shown)

i-1200E 2x8-key non-display, goose­neck and headset connections and
loudspeaker with level control

6 | Clear-Com

i-1470E

i-1210E 2x8-key display, gooseneck
and headset connections and loud­speaker with level controls (not shown)

i-1400E 4x8-key non-display, goose­neck and headset connections and
loudspeaker with level control

i-1430E 4x8-key display gooseneck
and headset connections and loud­speaker with level control with keypad
(dial and assignment menus)

i-1470E as per I-1430E, but with
AUX-101 option (local audio and GPIs)

e-1410E 4x8-key display extension panel