DX100 Portable Digital Wireless Intercom System
Base Station Highlights
> Weather-Proofed Gaskets
protect electronic circuits from inclimate
weather intrusion.
> Compatible with DX200 Base Station
enables beltpacs to be easily interchanged between bases for better
utilization of existing inventory.
> Digital Frequency Hopping
Spread Spectrum
with encrypted signals secures communications so people outside the system
can’t hear your conversations.
> Dual Slot Diversity and
Diversity Antennas
provide the strongest signal possible
for clear,seamless and uninterrupted
conversations.
> Remotely “Unlatch” Beltpacs’
Transmitter
helps you quickly locate and stop a
belt-pac that’s been unintentionally
left transmitting --- from the convenience of your base station.
Beltpac Highlights
> Super Compact Design
makes the beltpac the industry’s lightest,
at only 7.4 ounces (0.21 kg).
> Rechargeable Lithium-Ion Batteries
provide up to 20 hours of beltpac
operation with each charge.
> Internal Antennas
are housed inside the beltpac for extra
protection and durability.
> Voice Prompts
inform users of status changes and system
diagnostics through the headset, such as
“low battery.”
> Completely Sealed Buttons
dramatically enhance the life of the beltpac by keeping dirt and moisture out and
preventing mechanical failures.
HM Electronics, Inc. 14110 Stowe Drive, Poway,CA 92064 | USA | www.hme.com | TEL: (800) 848.4468 or (858) 535.6151 | FAX: (858) 552.0139
© 2005 HM Electronics, Inc.The HME logo and product names are registered trademarks of HM Electronics, Inc.All rights reserved.
LT05-16
System Specifications
Frequency Range: . . . . . . . . . .2400-2483.5 MHz
Frequency Response: . . . . . . .200 Hz to 3.5 kHz
Security . . . . . . . . . . . . . . . . . . .64-Bit Encryption
Temperature Range: . . . . . . . .(Typical) -20 to 55°C (-4 to 131°F)
FCC License . . . . . . . . . . . . . . . .Not Required
System Transmit
Type : . . . . . . . . . . . . . . . . . . . . . .Frequency Hopping Spread Spectrum (FHSS)
Transmit Power: . . . . . . . . . . . .100mW Burst
Transmission Modes: . . . . . . .Continuous (Latched) or Push-to-Talk (PTT)
Modulation Type: . . . . . . . . . .Guassian Filtered FSK, TDMA
System Receive
Type : . . . . . . . . . . . . . . . . . . . . .Frequency Hopping Spread Spectrum (FHSS)
Sensitivity: . . . . . . . . . . . . . . . . .<-90dBm with 10
-3
BER
Dynamic Range: . . . . . . . . . . .-90dBm to -20dBm
Distortion: . . . . . . . . . . . . . . . . .<2%
Base Station Specifications
Antenna Type: . . . . . . . . . . . . .External, Dual Diversity, ½-Wave Dipole (Supplied)
Power Requirements: . . . . . . .Six 1.5V AA Batteries or Rechargeable BAT850 Battery;
12VDC Automotive Adapter or 100/240VAC
Power Supply
Size: . . . . . . . . . . . . . . . . . . . . . . .10.2" x 6.45" x 3.33"
(25.91cm x 16.38cm x 8.46cm)
Weight: . . . . . . . . . . . . . . . . . . . .2.35 lb (1.07 kg) with Alkaline Batteries
Front Panel Controls: . . . . . . .Power Switch
Register Beltpac
Beltpac Unlatch
Clear Registration
Reset Button
Front Panel Indicators: . . . . . .Beltpac Registration Status Display
Power/Low BAT Indicator
Beltpac Receive
Beltpac Specifications
Battery Requirements: . . . . . .One Lithium-Ion Rechargeable
Battery Life: . . . . . . . . . . . . . . . .Latched (Hands-Free): Up to 14 Hours
PTT: Up to 20 Hours
Size: . . . . . . . . . . . . . . . . . . . . . . .3.4" x 2.6" x 1.5"
(8.64cm x 6.60cm x 3.81cm)
Weight: . . . . . . . . . . . . . . . . . . . .7.4 oz (0.21 kg) with Battery & Pouch
Headset Connector: . . . . . . . .Mini-DIN
Mic Input: . . . . . . . . . . . . . . . . .Electret
Headset Output: . . . . . . . . . . .160 mW @ into 32Ω
Capable of Driving 16-32Ω
Controls: . . . . . . . . . . . . . . . . . .Volume On/Off
Volume Up/Down
Talk Intercom
Talk ISO
Indicators: . . . . . . . . . . . . . . . . .Power/Transmit/Low Battery LED & Voice Prompts
Carrying Pouch: . . . . . . . . . . . .Santoprene Rubber