Clear-Com CC-300, CC-400 User Manual
Linking
People
Together
CC-300 and CC-400 Headsets
Intercom Accessories
CC-400CC-300
Key Features and Benets
• High-quality dynamic hyper-
cardioid microphone
• High ambient-noise attenuation
headphones
• 40Hz-20kHz frequency response
• Flexible gooseneck microphone
positioning
• Boom rotation ON/OFF switch for
quick microphone muting
• Interchangeable cabling for easy
connector changing and repair
• Fully serviceable headsets
• Storage bag and ear pad covers
included
A versatile high performance range of headsets designed
to give excellent audio quality, comfort and ease of use to
suit every need.
Description
The CC-300 (single-ear) and CC-400 (double-ear) headsets feature high performance
headphones and cardioid dynamic microphone that provide high quality audio.
Operation
The CC-300 and CC-400 headsets can be easily adjusted to accommodate the preference
of any user. The microphone boom has a 300° rotation to allow the microphone to be worn
on the left or right side of the head. Users can make the headset larger or smaller by using
the slide adjusts on either side of the headband. Cushioned with super-soft leatherette
padding, the headphones sit on the ear to provide a comfortable t for users. A rotating,
exible gooseneck is included for optimal positioning.
Integrated Mute Switch Operation
The CC-300 and CC-400 headset microphones can be turned on and off by moving the
microphone boom. To turn ON the microphone, pull the boom gently downwards (past the
10 o’clock/2 o’clock position). To turn the microphone OFF, push the boom gently upwards
(above the 10 o’clock/ 2 o’clock position).
Interchangeable Cabling
The CC-300 and CC-400 headsets have been designed so that the cabling and connector
type can be adapted quickly to the application. Users can order cables with different XLR
connector choices and appropriate pin-outs. To change the connector cable in the eld,
simply disconnect the cable from the headset and exchange the cable with a standard
Phillips screwdriver. The same process can be used to repair and replace a damaged cable
on the y.
Technical Specications
Polar Paern
Scale is 5 decibele per division
1 MHz
0˚
30˚
60˚
90˚
120˚
150˚
180˚
210˚
240˚
270˚
300˚
330˚
Polar Paern
Scale is 5 decibele per division
CC-300 and CC-400 Headsets
Intercom Accessories
Headphone
Type: Closed-back
Driver: 40mm diameter, neodymium magnet,
copper-clad aluminum wire voice coil
Frequency Response: 40Hz v- 20kHz
Microphone
Element: Dynamic
Polar Pattern: Hyper-cardioid
Frequency Response: 300Hz - 20kHz
Sensitivity
Open Circuit Sensitivity: -61dB ±3.5dB; at
1kHz, typical
CC-300: 102dB ±3dB (SPL); at 1kHz typical
CC-400: 98dB ±3dB (SPL); at 1kHz typical
Impedance
CC-300: 400 ohms ±30%; at 1kHz typical
CC-400: 200 ohms ±30%; at 1kHz typical
Microphone: 200 ohms ±30%; at 1kHz typical
Connector
Cable: 5ft (1.55m) long with 8-pin connector at
headset end; 4-pin Female XLR
Dimensions
Packaging for CC-300 and CC-400:
4.8 x 13 x 10.43in (WxHxD)
(122 x 330 x 265mm)
Weight
CC-3000: 8.6oz (245g) without 8-pin cable
assembly and M3*18mm SCREW
CC-4000: 11.1oz (315g) without 8-pin cable
assembly and M3*18mm SCREW
Wiring Diagram for Connector Pin-Outs
Order Codes
CC-300-X4: Single-ear 4-pin Female
XLR
CC-300-X5: Single-ear 5-pin Male
XLR
CC-300-X6: Single-ear 6-pin male XLR
(balanced mic)
CC-300-X7: Single-ear 7-pin Female
XLR
CC-300-Y5: Single-ear 5-pin Female
XLR
CC-300-B6: Single-ear no connector
CC-400-X4: Double-ear 4-pin Female
XLR
CC-400-X5: Double-ear 5 pin Male
XLR
CC-400-X6: Double-ear 6-pin male
XLR (balanced mic)
CC-400-X7: Double-ear 7-pin Female
XLR
CC-400-Y5: Double-ear 5-pin Female
XLR
CC-400-B6: Double-ear no connector
Microphone Boom Rotation Switch Microphone Polar Response
0˚
180˚
30˚
60˚
90˚
120˚
150˚
On On
o
p
-
p
o
t
S
Off
t
n
i
No
rotation
330˚
300˚
S
t
o
p
-
p
o
i
n
t
270˚
240˚
1 MHz
210˚
www.clearcom.com
® Clear-Com and the Clear-Com logo are registered
trademarks of HM Electronics, Inc. Copyright
© 2017. Clear-Com, LLC. All rights reserved.
Notice About Specications | While Clear-Com makes every attempt to maintain the
accuracy of the information contained in its documentation, that information is subject to change without
notice. Performance specications included in this document are design-center specications and are
included for customer guidance and to facilitate system installation. Actual operating performance may vary.
Loading...