Page 1
X102A
X102B
X102D
MODEL
X102
Flow Limiting Assembly
& Pilot System Components
• Automatic Operation
• Corrosion Resistant
• No Lubrication
• Easy Adjustment
• Easy Maintenance
The Cla-Val Model X102 Flow Limiting Assemblies regulate
flow through Cla-Val Automatic Valves from full flow to shut-off.
These adjustable assemblies control flow by limiting the
amount of the valve opening.
The X102A and X102D maintain a pressure seal during adjustment by means of an internal “O” Ring.
The X102B is pressure sealed by means of an external
resilient washer, compressed when the Jam Nut is tightened,
after adjustment.
"O" Ring
Seal
1/2”, 3/4”, 1” Sizes
Maximum
2.56"
Maximum
Minimum
3.56
Minimum
2.19"
X102A
4.69
X102D
Maximum
Minimum
11.84
8.22
1-1/4” - 10” Sizes
"O" Ring
Seal
X102B
Maximum
Minimum
4"
2"
1 1/4" - 3" 7100 Series Valves
Buna-N
Washer
Seal
1/2" NPT
Specifications
Pressure Ratings:
Valves
Valves 4" and 6" ...........................................100 psi maximum
Valves 8".........................................................30 psi maximum
Valves 10".......................................................20 psi maximum
Materials:
Body (all models) .............................................................Brass
Stem X102A...............................................303 Stainless Steel
" through 3" ................................150 psi maximum
1/2
X102B.....................................................................Brass
X102D.....................................................................Brass
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: claval@cla-val.com • Website cla-val.com
CLA-VAL
Copyright Cla-Val 2011 Printed in USA Specifications subject to change without notice.
3/8" NPT
"O" Ring
Seal
1" 7100 Series Valves
©
When Ordering, Please Specify
When ordering please specify the following
information:
1. Flow Limiting Assembly Catalog Number
2. Valve Catalog Number
3. Valve Size
E-X102 (R-3/2011)
Loading...