Page 1
MODEL
X101
Valve Position Indicator &
Pilot System Components
• Positive Visual Indicator
• Frictionless
• Leak Proof
• Easy Maintenance and Cleaning
• Protected Indicator Rod
The Cla-Val Model X101 Visual Position Indicator is designed to
display Cla-Val valve position quickly and easily. A solid brass
indicator rod fastened directly to the valve stem moves up and down
inside a pyrex tube. The tube is contained within a brass housing
which is open on two opposite sides to permit clear vision of the
indicator rod.
To purge air that may be trapped in the valve cover, a vent valve in the
top of the housing is provided. Model X101 valve position indicator is
furnished complete for installation on specified size Cla-Val Automatic
Control Valve.
Dimensions
A
Vent Valve
Closed
B
NPT
Stem
Vent Valve
Gasket
Housing
Sight Tube
Gasket
Adapter
Bushing
Valve Cover
Stem Adapter
Valve Stem
VALVE A B
SIZE INCHES NPT
1" 5.88
1/4
1
" 3.21
1/2
1
" 3.21
2" 3.33
1/2
2
" 3.33
3" 3.33
4" 4.52
6" 4.52
8" 5.83 1
10" 7.70 1
12" 8.20 1
14" 8.20 1
16" 10.81 2
20" 12.04 1"
24" 12.04 1"
1/4"
1/4"
1/4"
1/2"
1/2"
1/2"
3⁄4"
3⁄4"
"
"
1/4"
1/2"
"
Specifications
Sizes: 1" thru 24"
Materials: Brass, Pyrex Tube
Pressure Rating: 400 psi
Optional Material: Stainless Steel
Installation
Can be installed on any Cla-Val basic main
valve in a few minutes. Simply replace the
fitting on top of the valve cover with the
indicator assembly.
When Ordering, Please Specify
1. Valve Size
2. Catalog No. X101
3. Valve Series No. (Appears on Valve Nameplate)
4. Optional Material
Stainless Steel
Dimension "A" is height added to valve by indicator assembly
Page 2
C
CSM-11 Solenoid Control
CDS6A Altitude Control
Body Material
Standard: Bronze with
Monel Trim
Option: Bronze with
Stainless Steel
Trim
CDC-1 Check Valve CSC Swing Check Valve
Wetted Body Material
Standard: Bronze with
Stainless Steel
Trim
No. of Springs Altitude Ranges
1 5 - 40 ft
2 30 - 80 ft
3 70 - 120 ft
4 110 - 160 ft
5 150 - 200 ft
Size Body Material Trim Material
1/4"-1" Standard: Bronze Brass
E-X101 (R-3/2014)
Size Body Material Trim Material
3/8"-1/2" Brass Delrin
Size Body Material Trim Material
3/8"-1" Brass Brass/Buna N
CN Series - Needle Valves CK Series - Isolation Valve
Size Body Material Trim Material
3/8"-1" Standard: Bronze Stainless Steel/Teflon
Option: Stainless Steel Stainless Steel
LA-VAL
PO Box 1325 Newport Beach CA 92659-0325
Phone: 949-722-4800 Fax: 949-548-5441
CLA-VAL CANADA CLA-VAL EUROPE
4687 Christie Drive
Beamsville, Ontario
Canada L0R 1B4
Phone: 905-563-4963
Fax: 905-563-4040
©COPYRIGHT CLA-VAL 2014 Printed in USA
Specifications subject to change without notice.
Chemin dés Mesanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
www.cla-val.com
Option: Stainless Steel Stainless Steel/Teflon
Represented By:
Loading...