Page 1
MODEL
Ti 100GS
Seawater Version
Titanium Deluge Valve
S
I
G
E
N
• U.L. and U.L.C. Listed/ABS Approved
• Globe Pattern
• Proven Reliable Design
The Cla-Val Model Ti 100GS Deluge Valve is designed for use in controlling water
flow to Deluge, Pre-Action, or Foam-Water type fire protection sprinkler systems. This
valve is U.L. Listed in "Special Systems Water Control Valves Class I (VLFT)". The
Model Ti 100GS is a hydraulically-operated, diaphragm-actuated, globe or angle pattern Deluge Valve. It consists of three major components: the body, the cover, and the
diaphragm assembly. The only moving part is the diaphragm assembly. Packless construction and simplicity of design assures long service life and dependable low maintenance for this valve.
The Ti 100GS are manufactured in materials suitable for seawater.
D
A
D
S
E
S
S
E
S
Type Approved
Typical Application
The Model Ti 100GS is installed to control the water flow to the sprinklers in Deluge, Pre-Action, or Foam-Water type systems. A simplified system is used to illustrate typical operation.
The Model Ti 100GS Deluge Valve (3) is maintained in the closed position by means of system water pressure controlled by a pilot control (4). When the pilot control valve receives
a signal from the fire detection system, it
allows the deluge valve to open. Firefighting
water (1) then enters system piping (5)
and discharges from sprinklers (6).
1
2
Specifications
Sizes: Globe: 3" – 4" – 6"
End Details: I
Pressure Rating: 26 bar max.
Temperature
Range:
Material: Main Valve Body & Cover
SO 7005-2 PN 10-16
150 ANSI B16.42 flanged
Water, to 180°F MAX.
Titanium ASTM B367 Grade C2
Friction Loss
Ti 100GS (Globe):
3" Size=42 Ft. of 3" Pipe
4" Size=92 Ft. of 4" Pipe
6" Size=116 Ft. of 6" Pipe
When Ordering, Please Specify
1. Catalog No. Ti 100GS 2. Size
3. Pressure Class 4. Internal Trim Material
(1) From System Water Supply
4
(2) System Shut-off Valve (Visual Stem)
(3) Cla-Val Model Ti 100GS
(4) Pilot Control System
(5) Sprinkler System Piping
(6) Sprinklers
5
3
For use in hydraulically calculated
systems, friction loss equivalent to:
Standard Main Valve Trim:
Titanium ASTM B367, Grade C2
Diaphragm and Disc:
Buna-N, synthetic rubber
Specifications Ti 100GS Seawater Service Option
Sizes Globe: 3" - 4" - 6" flanged
"Fluid Control at It's Best"
Page 2
To calculate the maximum wet sprinkler pilot height above the valve, use the graph below.
Functional Data
Valve Size
C
Globe
V
Pattern
Factor
Inches
mm
Gal./Min. (gpm)
Litres/Sec. (l/s)
3 4 6
80 100 150
115 200 440
27.6 48 105.6
Valve Size (Inches) 3 4 6
A 150 ANSI 12.00 15.00 20.00
B Dia. 9.12 11.50 15.75
C Max. 8.19 10.62 13.38
D 2.56 3.19 4.31
K 7.00 4.03 6.75
L 2.56 2.81 3.81
N NPT 1/2"-14 3/4"-14 3/4"-14
P NPT 1 1/4"-11 1/2 2"-11 1/2" 2"-11 1/2"
R 150 ANSI 2.50 3.47 3.25
X Pilot System 15.00 17.00 29.00
Y Pilot System 11.00 12.00 20.00
Z Pilot System 11.00 12.00 20.00
CLA-VAL
PO Box 1325 Newport Beach CA 92659-0325 Phone: 949-722-4800
Fax: 949-548-5441 Web Site: cla-val.com E-mail: claval@cla-val.com
CLA-VAL CANADA CLA-VAL EUROPE
E-100GS Ti (R-05/2014)
4687 Christie Drive
Beamsville, Ontario
Canada L0R 1B4
Phone: 905-563-4963
Fax: 905-563-4040
E-Mail: sales@cla-val.ca
©
Copyright
CLA-VAL 2014 Printed in USA Specifications subject to change without notice.
Chemin des Mésanges 1
CH-1032 Romanel/
Lausanne, Switzerland
Phone: 41-21-643-15-55
Fax: 41-21-643-15-50
E-Mail: cla-val@cla-val.ch
Valve Size (mm) 80 100 150
A 150 ANSI 305 381 508
B Dia. 232 292 400
C Max. 208 270 340
D 65 81 110
K 178 102 171
L 65 71 97
N NPT 1/2"-14 3/4"-14 3/4"-14
P NPT 1 1/4"-11 1/2 2"-11 1/2" 2"-11 1/2"
R 150 ANSI 64 88 83
X Pilot System 381 432 737
Y Pilot System 279 305 508
Z Pilot System 279 305 508
Represented By:
CLA-VAL UK
Dainton House, Goods Station Road
GB - Tunbridge Wells
Kent TN1 2 DH England
Phone: 44-1892-514-400
Fax: 44-1892-543-423
E-Mail: info@cla-val.co.uk
Loading...