Classe Audio Omega Brochure

OMEGA MONO

POWER AMPLIFIER

The Omega Mono is Classé’s reference

standard power amplifier. It is an ultra

high-power, high-current mono power

amplifier that utilises fully-balanced audio

circuitry from input to output. The Omega

Mono is able to accept both balanced

and single-ended inputs.

For incorporation into the very finest audio

systems, the Omega Mono embodies the

definitive reproduction of all forms of speech

and music from any high quality source.

The Omega Mono power amplifier has

almost unlimited power output and current

delivery, bringing the best out of any worthy

loudspeaker system.

Specifications

Model Omega Mono

Voltage gain 29.1dB

Phase < -10° @ 22kHz

Sensitivity 2.25Vrms

Power output 600W continuous rms @ 8Ω

1200W continuous rms @ 4

Bandwidth 10Hz – 22kHz (+0/-0.1dB)
10Hz – 155kHz (+0/-3.0dB)

THD + noise
(unweighted, 1.0Vrms/ 1kHz input, 10Hz - 500kHz)
Load (resistive)
8 ohms 0.004%

Noise FFT noise floor peaks all below

-95dBV (with terminated inputs)

S/N ratio better than 106dB
(ref. full output,
10Hz – 80kHz)

Classé Audio • 5070 Francois Cusson • Lachine, Quebec • Canada H8T 1B3 • [phone] • [phone] (fax) • www.classeaudio.com

Ω

Input Impedance

Output Impedance 50mΩ

Overall Dimensions

Height 19.5”(495mm)

Depth 23.75”(603mm)

Width 11.5”(292mm)

Shipping case dimensions

Height 24.5”(622mm)

Depth 29.5”(749mm)

Width 17.0”(432mm)

Shipping weight 224lbs (102kg)

Net weight 192lbs (87kg)

Idle power consumption 240W

Rated power consumption 708W

75kΩ