Classe Audio Delta Series CA-M600 Specifications

D E L T A S E R I E S
CA-M600
600W MONAURAL AMPLIFIER
6 0 0 W M O N A U R A L A M P L I F I E R
CA-M600
Our newest Delta series amplifiers embody all that Classé represents: innovation, technological achievement, consummate craftsmanship, and iconic design. But they are not just the latest in the distinguished line of Classé amplifiers to be launched since 1980. They are new, revolutionary and unique.
Performance first
The Classé design team has created the ultimate environment to amplify an audio signal. The entire amplification process occurs on a single board, creating the most direct and transparent signal path conceivable. Our uniquely miniaturized driver stage is virtually noise free, so every nuance of the original signal reaches the output stage. Here, vast quantities of clean power are controlled with absolute precision. Suddenly, the world’s finest speakers sound even better.
Performance
There is a relationship between temperature and performance but it is widely misunderstood. Audiophiles say that optimal performance is obtained when an amplifier is “warmed up,” but what does this actually mean? When is it warm enough and when is it too warm?
fast
The exposed heatsink fins found on conventional amplifiers are passive. They can’t help circuits reach their ideal temperature or keep them there throughout a listening session. They run at a temperature wholly defined by their environment and how loud they are playing. This can be far from ideal.
Heat management in Classé’s new Delta series amplifiers is provided by the ICTunnel™ (pronounced Icy Tunnel), a sensor- and microproces­sor-controlled technology inspired by the heatsinks found in high-power laser and medical equipment. Mounted inside the unit, the ICTunnel™ actively regulates the amplifier temperature to ensure both optimum performance and reliability.
From room temperature, the amplifiers warm up fast. They reach their ideal temperature in less than fifteen minutes and remain there regard­less of how hard they are driven. No conventional heatsink can do this.
In a Class by itself
Ground-breaking performance, prodigious power, sophisticated control and rock-steady reliability—Classé’s new Delta series is a giant leap in amplifier design. Thanks to exclusive ICTunnel™ and audio technologies, only Classé amplifiers can consistently deliver top performance and reliability in every installation.
6 0 0 W M O N A U R A L A M P L I F I E R
CA-M600
All tests un-weighted and 500kHz measurement bandwidth (except SNR).
Frequency response 1 Hz – 100 kHz, -3dB
D E L T A S E R I E S
Output power
Harmonic Distortion <0.002% at 1 kHz balanced
Peak Output Voltage 226V peak to peak, 80V rms no load
Input Impedance
Voltage gain 29dB balanced / single ended
Input level at clipping 2.86V rms balanced / single ended
Intermodulation Distortion
Signal to Noise Ratio
Output impedance
Standby power consumption < 1W
Rated power consumption
Width 17.5” (444mm)
Depth (excluding connectors) 17.52” (445mm)
Height 8.78” (223mm)
Gross weight 100 lb (45.4 kg)
Net weight 88 lb (39.9 kg)
600W rms into 8 (27.8 dBW) 1200W rms into 4 (27.8 dBW)
<0.004% at 1 kHz single ended
206V peak to peak, 73V rms into 8
50k balanced / single ended
>100dB below fundamental into 8 balanced / single ended >90dB below fundamental into 4 balanced / single ended
-120dB at peak output into 8 Measurement Bandwidth: 22 kHz
0.03 @ 1 kHz
th
440W @ 1/8
power into 8
Mains voltage Specified on rear panel
Prices and specifications subject to change. We are not responsible for typographical errors. Printed in Canada on recycled stock.
USA & Canada • Classé Audio Inc.
5070 François Cusson • Lachine • Quèbec • Canada • H8T 1B3
Tel +1.514.636.6384 • Fax +1.514.636.1428
www.classeaudio.com • email: cservice@classeaudio.com
Loading...