Clarion QY8700 User Manual

Car Navigation

QY-8700 MODEL

Navigation system manual

Names of Various Parts
Basic Operations
Bluetooth Operation
Navigation

�����������������������������������������������������������

����������������������������������������������������

�������������������������������������������������������

������������������������������������������������������

Navigation System Settings
Route Guidance
About Information

��������������������������������������������������������

������������������������������������������������������

Table of contents

�������������������������������������������������

10

3
4

English

5
6
8
9

1

Warning

● Changes or modifications to this unit not expressly ap-
proved by the party responsible for compliance could

English

void the user’s authority to operate the equipment.

NOTE:

G This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep­tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

zConsult the dealer or an experienced radio/TV technician for help.

To comply with FCC’s and Industry Canada’s RF radia­tion exposure limits for general population/uncontrolled
exposure,this device must be installed to provide a sepa­ration distance of at least 20cm from all persons.”

This device complies with Part 15 of the FCC Rules. Op­eration is subject to the following two conditions :

● This device may not cause harmful interference, and

● This device must accept any interference received,
including interference that may cause undesired opera­tion.

Shielded cables must be used with this unit to ensure
compliance with the Class B FCC limits.

The device must not be co-located or operating in con­junction with any other antenna or transmitter.

2

2

4

1

3

5
6

7
8

!

9

@

#

$

0

[v]Previous Track button: In CD/USB/iPod/ Bluetooth

Names of Various Parts

Panel Buttons

7

Audio Device mode, short press it to select the previous
track to play, and long press it to Fast Reverse; in AM/
FM mode, short press to search radio station frequency
down automatically.

[

BACK] button: Back to the previous mode.

8

[

TUNE-SCROLL

9

] knob/[PUSH/SOUND] button: In

English

AM/FM mode, rotate to search radio station frequency
manualy; press to store radio stations in memory. Press
and turn the knob to jump to previous or next touch key
and select it in source and menu mode. In other mode,
press and turn the knob to adjust the volume balance.

0

button/Volume Knob: Switch to adjust volume; short

press to turn off/on audio device.
[AUDIO] Audio button: To enter audio selection screen

!

or Audio Mode.
[ ]Day/night button: Press to switch between day or

[Q]Eject button: Short press it to eject the disc inside

1

the unit.

Disc slot: CD disc can be inserted for playing.

2

LCD(touch screen): To display the working statuses of

3

various modes.

SD card slot: Map SD card.

4

[CAMERA] button: To enter camera mode.

5

[x]Next Track button: In CD/USB/iPod/Bluetooth Au

6

dio Device mode, short press it to select the next track
to play, and long press it to Fast Forward; in AM/FM
mode, short press to search radio station frequency up
automatically.

@

night mode.
[MAP] Map button: Press to enter the map screen.

#

[MENU] Menu button:Press to enter Menu Screen to

$

select audio function or navigation function.

-

Caution

● It is prohibited to pull out the map SD card or the
system will not work.

3

Basic Operations

Mode Switch

■Switch to navigation mode

English

Press [MAP] button on the panel to
switch to navigation mode for map
display.

■Switch to source mode

Press [AUDIO] button on the panel
or touch
such as Radio mode.

to switch to source mode

touch
screen.

to enter main menu

■Switch to Bluetooth mobile
phone mode

Touch
phone mode.

4

switch to Bluetooth mobile

Press [AUDIO] button or touch

in Source mode to switch

to source selection screen.

Main menu operations

On main menu screen you can enter
corresponding work mode by touch
the icons on the screen.

Press [MENU] on the panel or

1

zChange page by dragging left or

right or touch

and .

Basic Settings

Press [MENU] button on the

1

panel.

Touch

2

to enter Settings Screen.

Bluetooth Operation

Pair Bluetooth Device

Touch

1

Then touch

enter Bluetooth setting screen.

to enter Settings Screen.

to

English

Touch the icon to enter the appro-

3

priate setting.

Source Media Mode

Press [AUDIO] button on the

1

panel or touch

screen.

Touch the icon to enter the appro-

2

priate source media.

to enter source

Touch

2

bile phone or audio device to pair.

If you want to select the mobile

3

phone 秋to pair, touch

to select the mo-

If you want to select the audio

4

device秋to pair, touch
you have to edit the PIN (minimum
4 digits and maximum 16 digits) to
pair the audio device.

After entering the PIN, touch

5

and operate as per the information
prompted.

.

, and

5

Touch the icon to enter the appro-

2

priate function.

English

After successful pairing, it will

6

automatically return to Bluetooth
Setting screen.

Bluetooth Telephone

Touch

1

to enter Phone screen.

Navigation

Menu Types and Operation

■Map menu (Menu on current
location map)

Touch

display the Map menu at the left side
of the screen.

■Location menu (Menu on
scrolled map)

After scrolling the map by touching

the Map screen, touch

screen to display the Location menu
at the left side of the screen.

on the map screen to

on the

Map Screen Features

■Types of the map

There are two types of map: the 2D
map and the 3D map.

● 2D Map

● 3D Map

6

■Indicators on the map

Indicators displayed on the Map
screen are different according to the
conditions at that time.

Indicators on the map of the current
location

1

2

3
3
4

Audio mark

1

Vehicle mark

2

[

3
4
5

Indicators on the scrolled map

]Map Menu key

[

]Map scale key

[

]Map bearing mark

Indicators are displayed after scroll­ing the map.

1

2

3

[

1
2

] (Slow Scroll)key

Displays the name of the street

under the cursor.

Indicators displayed during the route
guidance mode

After a destination is set and travelling
is started, the guidance route and
various guidance information are
displayed on the map.

1

2

3

Small Turn Arrow display

1

Guidance point

2

Distance to the waypoint/destination

3

Manipulating the Map Screen

■Scrolling the map

Touching the Map screen displays
a cursor at the centre of the screen,
you can scroll the map.

■Slow scroll mode operation

Touch
to display the following screen:

Keep touching the desired arrow key
(
the map slowly towards the corre-

sponding direction. To quit the slow
scroll mode, touch

■Zooming IN/OUT the map

Touch

1

out key.

while scrolling the 2D map

, , , , , , , .) moves

.

to display the zoom in/

English

7

English

Touch

2

map scale.

■Changing the map appearance

The Map screen can be adjusted
regarding orientation or appearance
of the map.

Touch

1

the current vehicle location.

Touch

2

View screen.

or to change the

on the Map screen of

to enter Map

Navigation System

Settings

Press [MENU]/[MAP]/[AUDIO]

1

button on the panel to display the
function bar.

Touch

2

Navigation Settings Screen.

Touch the item to enter the appro-

3

priate setting.

, to enter

Entering the Destination

Searching Your Destination
from the Destination Menu

You can search for a destination from
the Destination menu by using vari­ous methods. Use a suitable search­ing method according to the place
you wish to go to, then operate as
per the information prompted.
Destination menu screen

Touch the corresponding key to

3

change the map view.

8

Route Guidance

After you have entered the destina­tion and started the route guidance,
you will be guided along the route by
screen display and by voice.

English

Junction Map

1 2

Remaining distance indication

1

Guidance route

2

Guidance point

3

3

Turn list on Route

The screen is always divided into two
displays and the Turn List on Route
is displayed on the left display if Turn
List is activated.

1

Turn List

1

Scrolling key

2

2

Changing/Editing the Route
Settings

From the Route menu, editing the
current route, confirming the route
information, setting the conditions
of the route calculation, etc. can be
performed.

Press [MENU] button on the

1

panel.

Touch to enter Route menu

2

screen when a route had exist.

Touch the desired item to change

3

or edit the route settings.

9

About Information

This screen sets or displays various
information that is helpful for using

English

the vehicle safely and comfortably.

Press [MENU] button on the

1

panel.

Touch to enter Info screen.

2

Touch the desired item to view the

3

information, and about some items
you can operate as per the infor­mation prompted.

10