Clarion QY8250, QY8200 User Manual

QY-8200/QY-8250 SERIES MODEL

Navigation system manual

Names of Various Parts Basic method of use Basic Operations Basic Settings

��

Source Media Mode Bluetooth Operation Navigation

��

Navigation System Settings Outline of Destination Entering Procedures Entering the Destination Route Guidance About Information

��

Table of contents

��

11 13 14 18 22 22 24 28 31

5 6

English

7 8

1

Warning

English

●When driving, the driver shall not operate….

The driver must park the vehicle in a safe place before operating the system.

●When driving, the driver must not read the navigation map…

Please refer to the voice prompts and follow the actual trafﬁc laws in driving.

●When driving, the driver must not watch the display of this unit….

Or the conditions at front of the vehicle may be neglected that may result in trafﬁc accidents.

●Please follow the actual trafﬁc laws to drive when using the navigation system as route guide or voice prompt…

If you drive only as per the route guided by the navigation system, you may violate the actual trafﬁc laws that may result in trafﬁc accidents.

●Do not use the equipment for a long time when the engine is off…

Or it will cause loss of electricity to the vehicle battery.

●Do not dismantle or modify this unit…

Or it may trigger accident, ﬁre or electric shock.

●Do not use the unit under such failure conditions as no display or no voice play…

Or it may trigger accident, ﬁre or electric shock. Contact NISSAN dealers.

Safety Precautions

●Stop using it immediately when there is any foreign object, water spill, smoke or bad smell and contact designated NISSAN dealers…

Continuous use may trigger accident, ﬁre or electric shock.

Caution

●The volume during driving shall be adjusted so that the sound outside the vehicle can be heard.

Or it may cause accidents.

●Pay full attention to operating this unit while driving so that safe driving is not affected…

Or it may affect driving and cause accidents.

●Do not use this unit for any purpose other than in the vehicle…

Or it may result in injuries or accidents.

●Never continue to use the unit in accidents…

Cut off the unit power supply if smoke, abnormal noise or smell is found.

●If the temperature inside the vehicle is high, use the unit after the temperature is lowered …

Or it may result in failure.

●Do not exert force on the screen

Or it may result in failure.

●Please follow the actual road trafﬁc lights to drive when using the navigation

Map contents may not be completely accurate due to trafﬁc development. Please keep in touch with the NISSAN Car dealers for timely update of map data.

2

Warning

●Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

GThis equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

zReorient or relocate the receiving antenna. zIncrease the separation between the equipment and receiver. zConnect the equipment into an out et on a ciruit differ-

ent from that to which the receiver is connected.

zConsult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, in-

cluding interference that may cause undesired operation. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

English

Radio

●The phenomenon of occasionally not receive radio station broadcast, noises or crosstalk during driving may be caused by road conditions, weather or environmental reasons.

USB

Not all USB memory devices are compatible with this unit due to different USB memory device models.

Bluetooth

●Not all mobile phones are compatible with this unit due to different mobile phone models and functions.

Disc

●In cold or rainy days, water droplets may form inside the equipment as mist may condense on the window glass.

●This (condensation) will result in distortion or failure in playing. Please wait for a moment and use the equipment after ventilation or dehumidiﬁcation.

●In order to protect the internal structure of the player, the player will stop playing automatically for protection

3

English

when something abnormal occurs during the playing. If the machine can’t operate normally even if you operate as per the displayed instructions, the machine may have malfunctions and you should contact NISSAN

dealers

.

●Distortion may occur if the vehicle is driven on the road of harsh conditions or is vibrated violently.

●MP3/WMA music ﬁles stored in CD-ROW/CD-R/CDRW may be played.

●Because of the characteristics, scratches, stains on the CD/SACD/CD-ROM/CD-R/CD-RW disc or long-time use inside the vehicle, the disc may not be played due to the worsening disc performance. The disc mentioned above can’t be played if it has been ﬁnally treated or written in UDF format.

●Music CD should be ofﬁcially identiﬁed.

●This unit does not support 8-cm disc.

●Do not use any disc with transparent or translucent data reading side as it can’t be inserted, taken out or played normally.

●Please do not use any disc that is not from the legitimate manufacturer.

Disc Storage

■

●Do not expose the disc to direct sunlight and make sure to put it inside the box, or the disc will deform and can’t be used.

●No paper slip should be adhered to the playing side or

identiﬁcation side of the disc or it will cause failure.

●Do not use any disc with crack or deformation, or it will cause failure.

●Do not touch the playing side of the disc (which is the smooth side with rainbow colours) when holding the disc, or ﬁngerprints will be left on the disc surface that may cause skipping.

●Playing a stained disc may result in disc scratch or skipping. Use disc cleaning agent available on the market to remove the stains on the disc by wiping softly from the inside to the outside.

Use of New Disc

■

●When a new disc is used, there might be some burrs at the inner edge and outer of the disc that shall be removed with a ball pen or other means.Or the bur will adhere to the playing side of the disc that may cause skipping.

Special- Shaped Disc

■

●Do not use any leased disc with glass ﬁlm, lease label or other adhesive. If such disc is played in the player, it will be hard to get it out and may result in failure.

Disc of Special Shape

■

●No disc in the shape of heart or octagon may be played or the machine will be damaged. Do not use such kind of discs.

4

Disc Decoration

[ ]

[OPEN/TILT]

■

●Do not use any decoration to improve tone quality or protect disc (such as disc case or protective case) as the change in the thickness or dimension of the disc may result in failure.

●Do not use any decoration to improve tone quality or shockproof performance (such as disc ring case or functional protective case), or the decoration may fall inside the machine that the disc can’t be played or taken out and result in failure.

Names of Various Parts

Operational Panel

[FM・AM]

[CD]

[AUX]

[w]

[z]

[ ]

[MAP]

[MENU]

[STATUS]

[v]

[x]

[ ]

English

LCD

●There will be brightened or darkened visual phenomenon if you watch the LCD from the sides.

●The screen will become illegible under direct sunlight or external light on the display.

●If the machine is turned on when the temperature is below zero, LCD will appear to be darker than usual until the temperature inside the machine rises.

Press [OPEN/TILT] button to slide down the panel.

Left side

Front side

[SD Card Slot]

[Disc Slot]

Names of Buttons

1

[FM・AM] button: enter the FM・AM mode.

2

[CD] button: enter the CD mode.

3

[AUX] button: enter the AUX mode.

4

[w] button: Increase the volume.

[Q]

5

English

5

[z] button: Decrease the volume.

6

button/Volume Knob: short press to turn off/on audio

device.

7

[MAP] button: Press to enter the map screen.

8

[MENU] button:Press to enter Menu Screen to select au-

dio function or navigation function.

9

[STATUS] button: View current status.

[D]Next Track button: In CD/USB/iPod/Bluetooth Au-

0

dio Device mode, short press it to select the next track to play, and long press it to Fast Forward; in AM/FM mode, short press to search radio station frequency up manually.

[A]Previous Track button: In CD/USB/iPod/ Bluetooth

!

Audio Device mode, short press it to select the previous track to play, and long press it to Fast Reverse; in AM/ FM mode, short press to search radio station frequency down manually. [ ] button: Enter the vehicle information menu and view

@

the information. [ ]Day/night button: Press to switch between day or

#

night mode. [ OPEN/TILT ] button: Press to slide down the panel.

$

SD card slot: Map SD card.

%

Disc slot: CD disc can be inserted for playing.

[Q]Eject button: Short press it to eject the disc inside

&

the unit.

Caution

●It is prohibited to pull out the map SD card or the system will not work.

Basic method of use

Switching the language

When the unit turns on, the default language is set to English. Switch to your language to use the unit.

1

Press [MENU] button on the panel.

2

Touch to enter Settings Screen.

3

Touch or slide the screen.

4

Touch .

5

Select the language and unit you use.

Setting the time

1

Press [MENU] button on the panel.

2

Touch to enter Settings Screen.

6

3

Touch .

4

Set the clock you need.

Mode Switch

Switch to navigation mode

■

Press [MAP] button on the panel to switch to navigation mode for map display.

Switch to Bluetooth mobile

■

phone mode

Touch switch to Bluetooth

mobile phone mode.

Switch to source mode

■

Press [AUDIO] button on the panel or touch to switch to source mode such as Radio mode.

Press [AUDIO] button or touch

in Source mode to switch

to source selection screen.

Basic Operations

Main menu operations

On main menu screen you can enter corresponding work mode by touch the icons on the screen.

1

Press [MENU] on the panel or

touch to enter main menu screen.

English

7

zChange page by dragging left or

right or touch and .

English

Adjust Volume

1

Press the [w] or [z] button on

the panel to adjust the volume.

zSource mode: Adjust the volume of source. zBluetooth Mobile Phone mode: Adjust the

incoming call ringtone volume when receiving a call, adjust the outgoing call ringtone volume when making a call, or adjust the call volume when speaking on the phone.

zMap navigation: Adjust Voice Guidance

volume when voice guidance interrupt.

zParking guidance: Adjust parking guid-

ance volume in parking guidance.

For example, press the volume button in Source USB mode to adjust the volume as shown below.

ON, you can turn off the Audio device.

1

Short press

[ ]

button to turn off

Audio.

2

Short press

[ ]

button again to

resume playing.

Day/Night Display Mode Switch

This can switch the screen display mode.

1

Press [ ] button on the panel to

to switch between day and night.

Basic Settings

1

Press [MENU] button on the panel.

Bluetooth Settings

Pair Bluetooth Mobile Phone or Bluetooth Audio Device / check the list of paired equipment/Set Bluetooth system of this unit.

NOTE:

*Pairing method of some mobile phones or

audio devices may differ or fail for Bluetooth pairing due to different types of mobile phones and audio devices.

1

Touch to enter

Bluetooth setting screen.

Audio On/Off

When the radio or media player is

8

2

Touch to enter Settings Screen.

zWhen there is no Bluetooth pairing equip-

ment record, the items “Connect with Blue- tooth” and “Select Device” will be invalid.

2

Touch to turn Bluetooth

On or Off.

3

Touch to Select the

mobile phone or audio device to connect. You can operate as per the information prompted.

4

Touch to view and

select BT Device.

5

Touch to edit

Bluetooth information.

Phone settings

You can conﬁrm and view various information concerning about the Bluetooth phone. Note: Before setting phone you need to pair the mobile phone with this unit.

1

Touch to enter

Phone setting screen.

2

Touch to edit and delete

Quick Dial number.

3

Touch to view Call His-

tory records.

4

Touch to download

Phonebook.

5

Touch to set Volume.

6

Touch to turn the

Auto Downloaded on or off.

Audio Settings

To set various sound effects.

1

Touch to enter

Audio setting screen.

2

Touch , , , , or to

adjust the tone quality.

Display Adjustment

Adjust the display effect of the screen.

1

Touch to enter

Display Adjustment screen.

2

Touch , the screen display

can be switched off to enter power save mode.

zAfter the screen display is OFF, the buttons

on the panel are still operational. Press

English

9