Clarion NX404E User Manual

Download

Page 1

Owner’s manual

NX404E

DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 6.2” TOUCH PANEL CONTROL

Page 2

CAUTIONS:

This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”. To use this model properly, read this Owner’s Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest “AUTHORIZED service station”. To prevent direct exposure to the laser beam, do not try to open the enclosure.

OBS!

Apparaten innehåller laserkomponenten som avger laserstrålning överstigande gränsen för laserklass 1.

English

Owner’s Manual

!CAUTION

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

ADVARSEL.

Denne mærking er anbragt udvendigt på apparatet og indikerer, at apparatet arbejder med laserstråler af klasse 1, hvilket betyder,at der anvendes laserstråler af svageste klasse, og at man ikke på apparatets yderside kan blive udsat for utilladelig kraftig stråling. APPARATET BØR KUN ÅBNES AF FAGFOLK MED SÆRLIGT KENDSKAB TIL APPARATER MED LASERSTRÅLER! Indvendigt i apparatet er anbragt den her gengivne advarselsmækning, som advarer imod at foretage sådanne indgreb i apparatet, at man kan komme til at udsaætte sig for laserstråling.

VAROITUS

Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähettää näkymätöntä silmille vaarallista lasersäteilyä.

NX404E

Page 3

English

Owner’s Manual

Contents

1. FEATURES ...........................................................................................................4

Expanding Systems ..............................................................................................4

2. PRECAUTIONS ....................................................................................................5

3. CAUTIONS ON HANDLING.................................................................................7

Operation Panel ....................................................................................................7

USB Port ...............................................................................................................7

Cleaning ................................................................................................................7

Handling Discs ......................................................................................................8

4.OPERATIONAL PANEL ......................................................................................10

Functions of Buttons ...........................................................................................10

5. REMOTE CONTROL(OPTIONAL) .....................................................................11

Remote Control Function ...................................................................................12

6. MAIN MENU.......................................................................................................14

7. DVD VIDEO PLAYER OPERATIONS ................................................................15

Discs ...................................................................................................................15

Change DVD System Settings ............................................................................16

Watching to a Disc ..............................................................................................16

Operate the DVD Player Menu ............................................................................17

Operate the Video ﬁles Player Menu ..................................................................19

Switching Subtitles .............................................................................................19

Video Files List ....................................................................................................19

Play DivX Video-On-Demand File .......................................................................19

Playable Disc Video Formats ..............................................................................20

8. CD PLAYER OPERATIONS ..............................................................................21

Listening to a Disc/Ejecting a Disc .....................................................................21

Showing CD Player Mode Screen ......................................................................21

Operate the CD Player Menu ..............................................................................21

Listening to Compressed Audio .........................................................................22

Tag Display Function ..........................................................................................22

9. USB AUDIO OPERATIONS ...............................................................................24

Notes on Using USB Memories ..........................................................................24

Select USB Audio Mode .....................................................................................24

Playing Audio Files in USB Memory ...................................................................25

Notes on Using USB Memories ..........................................................................26

Select USB Video Mode .....................................................................................26

Playing Video Files in USB Memory ...................................................................26

Playable Video Formats ......................................................................................26

10. USB VIDEO OPERATIONS ..............................................................................26

11. iPod OPERATIONS..........................................................................................28

Notes on using Apple iPod/iPhone .....................................................................28

iPod Audio ID3 Info .............................................................................................28

iPod Audio Playlist Mode Screen .......................................................................29

iPod Video ID3 Mode Screen ..............................................................................31

iPod Video List Mode Screen .............................................................................31

iPod Video Simple Control Mode Screen ...........................................................32

iPod Video Play Mode Screen ............................................................................32

iPod Audio Bluetooth Mode ................................................................................32

12. Bluetooth® AUDIO PLAYER OPERATIONS ..................................................33

Selecting the Bluetooth Audio Mode ..................................................................33

Bluetooth Audio Player Settings .........................................................................33

Registering your Bluetooth audio player (Pairing)...............................................33

Selecting the Bluetooth Audio Player .................................................................34

Controlling the Bluetooth Audio Player ...............................................................34

NX404E

Page 4

13. Bluetooth®

Select the BT Phone Mode .................................................................................35

Bluetooth Telephone Settings ............................................................................35

Registering Your Cellular Phone (Pairing) ...........................................................36

Select the Cellular Phone ....................................................................................36

Obtaining the Phone Book Data .........................................................................36

Telephone Operations ........................................................................................36

14. TUNER

15. TV

OPERATIONS

16. DAB

17. HDMI

Select HDMI source ...........................................................................................43

18. AUX .................................................................................................................44

19. CAMERA INPUT OPERATIONS .....................................................................44

20. REAR SOURCE OPERATIONS .......................................................................45

DVD Video in Rear ..............................................................................................45

DVD Video Rear Source Control Information Mode. .........................................45

DVD Video Rear Source Control Direct Mode. ..................................................45

iPod Video in Rear ..............................................................................................46

iPod Video Rear Source Control Play Mode .......................................................46

iPod Video Rear Source ID3 Mode .....................................................................46

TV in Rear ...........................................................................................................46

21. SETTING OPERATIONS ..................................................................................47

General Setup Menu ...........................................................................................47

Video Setup Menu ..............................................................................................47

Audio Setup Menu ..............................................................................................48

Navigation Setup Menu ......................................................................................48

Others Setup Menu .............................................................................................48

Set the Anti-Theft code .......................................................................................49

22. TROUBLESHOOTING .....................................................................................50

GENERAL ............................................................................................................50

DVD PLAYER ......................................................................................................50

USB DEVICE .......................................................................................................51

Bluetooth ............................................................................................................51

TFT screen ..........................................................................................................52

23. ERROR DISPLAY.............................................................................................53

DVD PLAYER ......................................................................................................53

24. SPECIFICATIONS ............................................................................................54

25. WIRE CONNECTION GUIDE ...........................................................................56

TELEPHONE OPERATIONS ..........................................................35

OPERATIONS .................................................................................................38

..............................................................................................39

OPERATIONS.......................................................................................................40

MODE .................................................................................................................42

English

Owner’s Manual

NX404E

Page 5

English

1. FEATURES

FLAC(Free Lossless Audio Codec)

Built-in Bluetooth® Handsfree (HFP) and Audio Streaming (A2DP &

Owner’s Manual

AVRCP)

Front-Panel Auxiliary Input and 6ch RCA Output with Subwoofer Control

Expanding Systems

Expanding audio features

External Power

Amplier

iPod

(Connect via CCA-750)

iPhone

iPhone/ Smartphone via HDMI

(Connect via CCA-750)

(Connect via CCA-770 or CCA-771)

Expanding visual features

Rear monitor

Rear Vision Camera

USB

Memory

Bluetooth

Telephone

NOTE:

•

The items listed outside of the frames are the commercial products generally sold.

•

CCA-750,CCA-770,CCA-771:Sold separately.

NX404E

Page 6

2. PRECAUTIONS

English

WARNING

• Foryoursafety,thedrivershouldnotwatchanyvideosourcesand/oroperatethecontrolswhiledriving.

Please note that watching and operating any video sources while driving are prohibited by law in some countries. Also, while driving, keep the volume to a level at which external sounds can be heard.

•Donotdisassembleormodifythisunit.Itmaycauseanaccident,re,orelectricshock.

•Donotusethisunitwhenatroubleexists,suchasnoscreencontentappearsornosoundis

audible. It may cause an accident, ﬁre, or electric shock. For that case, consult your authorized dealer or a nearest Clarion service center.

•Incaseofaproblem,suchasanymaterialhasbeenenteredintheunit,theunitgetswet,or

smoke or strange smells come out of the unit, etc., stop using this unit immediately, and consult your authorized dealer or a nearest Clarion service center. Using it in that condition may cause an accident, ﬁre, or electric shock.

•Useafusewiththesamespecicationonlywhenreplacingthefuse. Using a fuse with a different speciﬁcation may causes a ﬁre.

•Fortheinstallationofthisunitorachangeintheinstallation,askyourauthorizeddealerora

nearest Clarion service center for safety. Professional skills and experiences are required to do so.

•Thisnavigationsystemshouldnotbeusedtoreplaceyourownjudgment.Noitinerarysuggested

by this navigation system should ever override any highway regulations, your own judgment, or a knowledge of safe driving practices. Do not follow the navigation system’s suggested itinerary if it would cause you to perform a dangerous or illegal act, place you in a dangerous situation, or take you into an area you consider unsafe.

•Theadviceprovidedbythenavigationsystemistoberegardedasasuggestiononly.Theremay

be times when the navigation system displays the vehicle’s location incorrectly, fails to suggest the shortest route, or fails to direct you to your desired destination. In such instances, rely on your own driving judgment, taking into account the driving conditions at the time.

•Donotusethenavigationsystemtolocateemergencyservices.Thedatabasedoesnotcontain

a complete listing of emergency services such as police stations, ﬁre halls, hospitals and walk-in clinics. Please show discretion and ask for directions in such instances.

•Asthedriver,youaloneareresponsibleforyourdrivingsafety.

•Inordertoavoidatrafcaccident,donotoperatethesystemwhiledriving.

•Inordertoavoidatrafcaccident,operatethesystemonlywhenthevehicleisstoppedatasafe

place and the parking brake is on.

•Inordertoavoidatrafcaccidentortrafcoffense,rememberthatactualroadconditionsand

trafﬁc regulations take precedence over the information contained on the navigation system.

•Thesoftwaremaycontaininaccurateorincompleteinformationduetothepassageoftime,

changing circumstances, and the sources of information used. Please respect current trafﬁc conditions and regulations at all times while driving.

•Whereactualroadconditionsandhighwayregulationsdifferfromtheinformationcontainedon

the navigation system, abide by the highway regulations.

•Keeptheamountoftimespentviewingthescreenwhiledrivingtoastrictminimum.

•Thenavigationsystemdoesnotprovide,norrepresentinanywayinformationon:trafcand

highway regulations; technical aspects of the vehicle including weight, height, width, load and speed limits; road conditions including grade, percentage of incline and surface conditions; obstacles such as the height and width of bridges and tunnels; and other current driving or road conditions. Always rely on your own judgment when driving a car, taking into account current driving conditions.

English

Owner’s Manual

NX404E

Page 7

1.When the inside of the car is very cold and

English

the player is used soon after switching on the heater, moisture may form on the disc (DVD/ CD) or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc (DVD/CD), wipe it

Owner’s Manual

o with a soft cloth. If moisture forms on the

optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation.

2.Driving on extremely bumpy roads which

cause severe vibration may cause the sound to skip.

10R-0 4713 5

5E5

3.This unit uses a precision mechanism. Even

in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

NX404E

Page 8

3. CAUTIONS ON HANDLING

English

Operation Panel

For a longer service life, be sure to read the following cautions.

•Theoperationpanelwilloperateproperlyina

temperature range of 0˚ to 60˚ C.

•Donotallowanyliquidsonthesetfrom

drinks, umbrellas etc. Doing so may damage the internal circuitry.

•Donotdisassembleormodifythesetinany

way. Doing so may result in damage.

•Subjectingtheoperationpaneltoshocks

may result in breakage, deformation or other damage.

•Donotletcigarettesburnthedisplay.

•Ifaproblemshouldoccur,havetheset

inspected at your store of purchase.

•Theremotecontrolunitmaynotworkifthe

remote control sensor is exposed to direct sunlight.

*Remote control unit is sold separately.

•Inextremelycoldweather,thedisplay

movement may slow down and the display may darken, but this is not a malfunction. The display will work normally when the temperature increases.

•Smallblackandshinyspotsinsidetheliquid

crystal panel are normal for LCD products.

USB Port

•TheUSBmemorysticksmustberecognized

as “USB mass storage class” to work properly. Some models may not operate correctly.

When the memorized data is lost or

damaged by any chance, Clarion shall not be liable for any damage.

When using an USB memory stick, we

recommend that you backup your data stored on it before by using a personal computer etc.

•DatalesmaybebrokenwhenusingUSB

memorysticksinthefollowingsituation:

When disconnecting the USB memory stick or turning the power off during writing or reading data. When affected by static electricity or electric noise. Connect/disconnect the USB memory stick when it is not accessed.

•Connectingwiththecomputerisnotcovered.

English

Owner’s Manual

Cleaning

• Cleaningthecabinet

Use a soft, dry cloth and gently wipe off

the dirt. For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth.

Do not use benzene, thinner, car cleaner, etc.,

as these substances may damage the cabinet or cause the paint to peel. Also, leaving rubber or plastic products in contact with the cabinet

for long periods of time may cause stains.

• Cleaningtheliquidcrystalpanel

The liquid crystal panel tends to collect dust,

so wipe it off occasionally with a soft cloth. The surface is easily scratched, so do not rub it with hard objects.

NX404E

Page 9

Handling Discs

English

Handling

•Newdiscsmayhavesomeroughness

around the edges. If such discs are used, the player may not work or the sound

Owner’s Manual

may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.

Ball-point pen

Roughness

Never stick labels on the surface of the

disc or mark the surface with a pencil or pen.

•Neverplayadiscwithanycellophane

tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of the DVD player or it may damage the DVD player.

•Donotusediscsthathavelarge

scratches, are misshapen, cracked, etc. Use of such discs may cause missoperation or damage.

•Toremoveadiscfromitsstoragecase,

press down on the center of the case and lift the disc out, holding it carefully by the edges.

•Donotusecommerciallyavailabledisc

protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism.

Storage

•Donotexposediscstodirectsunlightor

any heat source.

•Donotexposediscstoexcesshumidity

or dust.

•Donotexposediscstodirectheatfrom

heaters.

Cleaning

•Toremovengermarksanddust,use

a soft cloth and wipe in a straight line from the center of the disc to the circumference.

•Donotuseanysolvents,suchas

commercially available cleaners, antistatic spray, or thinner to clean discs.

•Afterusingspecialdisccleaner,letthe

disc dry off well before playing it.

On Discs

•Neverturnoffthepowerandremovethe

unit from the car with a disc loaded.

CAUTION

For your safety, the driver should not insert or eject a disc, opening the operation panel while driving.

NX404E

Page 10

About the registered marks, etc.

This product incorporates copyright protection

•

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation.

Manufactured under license from Dolby

•

Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

"Made for iPod," and "Made for iPhone" mean

•

that an electronic accessory has been designed to connect speciﬁcally to iPod, or iPhone, respectively, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, iPod, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc.

The Bluetooth® word mark and logos are registered

•

trademarks owned by the Bluetooth® SIG, Inc. And any use of such marks by Clarion Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners.

DivX

, DivX Certiﬁed® and associated logos

•

are trademarks of Rovi Corporation or its subsidiaries and are used under license. DivX Certiﬁed® to play DivX® video, including premium content. Covered by one or more

ofthefollowingU.S.patents:7,295,673;

7,460,668; 7,515,710; 7,519,274

ABOUTDivXVIDEO:DivX® is a digital video

format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofﬁcial DivX Certiﬁed® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to convert your ﬁles into DivX videos.

ABOUTDivXVIDEO-ON-DEMAND:ThisDivX

Certiﬁed® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

English

Owner’s Manual

NX404E

Page 11

English

4.OPERATIONAL PANEL

Owner’s Manual

[Microphone]

[MENU]

[NAVI/AV]

[POWER/VOL]

[IR]

[RESET]

[microSD slot]

[Cover]

[AUX IN]

Functions of Buttons

[POWER/VOL] Knob

• Press this knob to turn on the power.

• When the power is already on, it moves to the Navigation mode. If Navigation mode is displayed, it moves to the Navigation menu.

• Keep pressing this knob more than 2 second to turn off the power.

• Turn this knob to left or right to decrease or increase the volume of the system.

[NAVI/AV] Button

• Press this button to display NAVI, press again to return current source.

• Press and hold this button for 2 seconds to display the Dimmer setting menu.

[

] Eject

• Press to eject disc from the unit.

[MENU] Button

• Press this button to display main menu; press again to return current source.

• Press and hold this button for 2 seconds to turn off the monitor. Press any place of the screen to turn on the monitor again.

[RESET] Button

• Press this button to hardware reset the unit.

Note: When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.

[

]

[Disc slot]

[microSD slot ]

Note: The microSD card is only for navigation. Please don’t insert microSD card for other purpose. After insertion of microSD card for MAP, don’t remove it; otherwise, the navigation function will be disabled.

[AUX IN]

AUX 1 Connector.

[Microphone]

This is used for Bluetooth phone.

[IR] SENSOR

•Receiver for the remote control unit (operating range: 30 degree in all directions).

NX404E

Page 12

5. REMOTE CONTROL(OPTIONAL)

English

*Remote control unit is sold separately.

[MUTE]

[ / ]

[ 0-9 ]

[SRCH]

[BACK]

[ , , , ]

[TITLE]

[ ], [ ]

[ZOOM]

[AUDIO]

Signal transmitter

Operating range : 30°in all directions

[OPEN]

[POWER / SRC]

[VOLUME]

[NAV/ AV]

[BAND] [SEL] [MENU] [PIC]

[ENT]

[TA]

[RPT]

[ROOT]

[ ], [ ]

[SUB.T]

[ANGLE]

English

Owner’s Manual

Replacing the batteries

1.Press the retention tab and pull out the

battery tray and remove the old battery.

2. Insert the new CR2025 battery and slide

the battery tray back in the remote control

the same direction that you removed it.

Please ensure the tray is inserted in the

correct direction.

CAUTION

• Keep the battery out of the reach of children.

Should the battery be swallowed, consult a doctor

immediately.

• Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, re or the like.

WARNING

Lithium batteries contain

Perchlorate

Dispose of discharged batteries properly.

NX404E

Page 13

English

• Use one CR2025 (3V) lithium battery.

• Remove the battery if the remote control is not used for a month or longer.

• There is a danger of explosion if battery in

Owner’s Manual

incorrectly replaced. Replaced only with the same or equivalent type.

• Do not handle the battery with metallic tools.

• Do not store the battery with metallic objects.

• If the battery leaks, wipe the remote control completely clean and install a new battery.

CAUTION

Remote Control Function

You can use the remote control unit to control the NX404E.

*Remote control unit is sold separately.

Note:

• The wireless remote control operation may not be optimal in direct sunlight.

• When disposing of used batteries, comply with governmental regulations or environmental public institutions’ rules that apply in your country/area.

Important

• Do not store the remote control in high temperatures or direct sunlight.

• The remote control may not function properly in direct sunlight.

• Do not let the remote control fail onto the oor, where it may become jammed under the brake or accelerator pedal.

[ / ] Button

• Press this button to play or pause video and audio media.

• Press this button more than 1 second to stop video and audio media.

[MUTE] Button

• Mute or Unmute the speaker.

• The symbol indicates that speaker is muted.

[POWER/SRC] Button

• Press this button to move the focus to next available source item on main menu.

• Press this button to power on when the unit is power off.

• Press this button more than 1 second to power off when the unit is power on.

[0 - 9] Buttons

• Use in the Key Pad screen to select the radio.

• Use to select the track in the track list screen.

• Press to enter DVD video chapters/titles in the Key Pad screen.

[VOLUME] Buttons

• Increase and decrease volume.

[NAVI/AV] Button

• Press this button to switch between current source and current position on navigation map.

[SRCH] Button

• Press this button to open chapter or title search window while playing DVD.

on upper right area of the screen

NX404E

[BAND] Button

• Switch to next band alternately.

[SET] Button

• Press this button to open the Audio setting menu in any mode.

[BACK] Button

• Press this button to quit main menu if current screen is main menu.

], [ ], [ ], [ ] Buttons

[

• Press this button for cursor movement in main menu or Setting mode.

• From the main menu, you can select your desired source or change your settings.

[MENU] Button

• Press this button to enter the MAIN MENU or return current resource.

[PIC] Button

• Press and hold this button to change your monitor Dimmer.

[ENT] Button

• Press to x the entered data in the Key Pad screen or enter the item the cursor is on.

[TA] Button

•Press the button to set TA On or Off.

[TITLE] Button

• Press to go to the title menu on the DVD.

[ROOT] Button

• Press to go to the root menu on the DVD.

Page 14

[RPT] Button

• Press to perform chapter repeat / title repeat / repeat off while playing DVD mode.

• Press to perform Repeat Track/Repeat All while playing CD.

• Press to perform Repeat Track /Repeat Folder/ Repeat All while playing MP3/WMA, or video les on disc.

• Press to perform Repeat Track /Repeat Folder/ Repeat All while playing MP3/WMA, or video les in USB memory.

], [ ] Buttons

[

• Press to seek the next available lower or higher station in Tuner mode.

• Press to select the next higher or lower chapter number in DVD video mode.

• Press to select the next lower or higher track in CD, USB Video, USB Audio mode.

• Press for movement of background source in Navigation mode.

], [ ]Buttons

[

• Press to manually select the next higher or lower station in Tuner modes.

• Press to perform fast-backward or fast-forward searching. Press again to change the speed to 2x,

4x, 8x or 16x.

• Press for movement of background source in Navigation mode.

[ZOOM] Button

• Press to turn on and zoom in while playing DVD. You can zoom in up to 3x. (No all DVD disc supports this function)

[AUDIO] Button

• Press to switch the AUDIO channel of the disc while playing DVD.

[SUB-T] Button

• Press to switch next available subtitle while playing DVD.

• Press to display Video menu in iPod mode.

[ANGLE] Button

• Press to switch the different ANGLE while playing DVD. (No all DVD disc supports this function)

• Press to display Audio menu in iPod mode.

[OPEN] Button

• Press to eject disc from the unit.

English

Owner’s Manual

NX404E

Page 15

English

6. MAIN MENU

Owner’s Manual

1 - Tuner---Touch the button to display the Tuner mode. 2 - DAB---Touch the button to display the DAB mode. 3 - Bluetooth Audio--- Touch the button to display the Bluetooth Audio mode. 4 - Disc Audio---Touch the button to display the Disc Audio mode. 5 - iPod Audio---Touch the button to display the iPod Audio mode.

6 - Navigation---Touch the button to display the Navigation mode. 7 - TV---Touch the button to display the TV mode. 8 - USB Audio---Touch the button to display the USB Audio mode.

9 - HDMI---Touch the button to display the HDMI mode. 10 - Disc Video---Touch the button to display the Disc Video mode. 11 - USB Video---Touch the button to display the USB Video mode. 12 - iPod Video---Touch the button to display the iPod Video mode. 13 - Telephone--- Touch the button to display the

Telephone mode. 14 - Camera---Touch the button to display the Camera mode. 15 - AUX1 ---Touch the button to display the AUX1 mode.

14 15

16 - Setting button---Touch the button to display the Setting menu. 17 - AUX2 ---Touch the button to display the AUX2 mode. 18 - Audio off---Touch the button to make audio source voice off. 19 - Rear---Touch the button to display the Rear mode.

Scrolling the menu

Flicking to right or left it will switch to next or previous

17 18

page of main menu.

Moving the menu position

1. Touch any quadrate icon on main menu more than 2 seconds, the icon will ﬂoat on main menu.

2. Scrolling the ﬂoating icon to any position you want.

NX404E

Page 16

7. DVD VIDEO PLAYER OPERATIONS

English

Discs

Playable discs

This DVD video player can play the following discs.

Playable discs

CD TEXTDVD video discs Audio CD

Playablemediales

MP3/WMA/AAC

About CD Extra disc

A CD Extra disc is a disc in which a total of two

sessions have been recorded. The rst session

is Audio session and the second session is Data session. Your personally-created CDs with more than second data sessions recorded cannot be played on this DVD video player.

Note:

•

When you play a CD Extra disc, only the ﬁrst session will be recognized.

About playing a CD-R/CD-RW disc (MP3, WMA)

This player can play CD-R/CD-RW discs previously recorded in music CD format (MP3, WMA).

About playing a DVD-R/RW or DVD+R/RW disc

MP3/WMA les recorded on DVD-R/ RW and

DVD+R/RW discs can be played.

Discs that cannot be played back

This DVD video player cannot play back DVDAudio, DVD-RAM, Photo CDs, etc.

Note:

•

t may also not be possible to play back CDs

recorded on a CD-R unit and CD-RW unit.

(Cause:disccharacteristics,cracks,dust/dirt,

dust/dirt on player’s lens, etc.)

•

If a CD-R or CD-RW disc that has not been ﬁnalized is played, it will take a long time to start playing. Also, it may not be possible to play depending on its recording conditions.

DivX

MP4

•

You cannot play SuperAudio CD.

The CD player is not supported even if it is a

hybrid disc.

About MP3/WMA playback

This unit can play back CD-R/CD-RW, DVD-R/ RW and DVD+R/RW discs on which MP3/WMA music data have been recorded. For a detailed information, see the section

entitled “Listening to compressed audio”.

Note on region numbers

The DVD video system assigns a region number to DVD video players and DVD discs by sales area. DVD video players sold in Asia can play back DVD discs with the region number “ALL”, “2” or any combination of numbers that also incorporate a “2”. The DVD video region number is marked on the

disc jacket as shown below.

ALL

Europe

NX404E

English

Owner’s Manual

Page 17

Change DVD System Settings

English

Note:

If the setup operation is performed in the middle of DVD

video play, the disc will restart from the beginning.

Owner’s Manual

Selecting DVD Setup Menu

1. Touch the [Settings] button on the Main Menu to access the Video setup menu.

2. Touch [Video] button.The video menu is displayed.

Setting up the Screen Size

Touch the [DVD Wide Screen Mode] button to turn on or turn off the DVD wide screen mode.

The factory default setting is “off” Note: Not all DVD disc support this function.

Setting up the password for parental level control

The factory default pass code is “0000”.

1.In Main Menu touch [Settings] button. Touch

[Others] button on the display. Touch the [Set Password] ---- and a numerical key pad will appear.

Set rating for parental level control

1.Select Others screen while in Setting mode. Touch

[Parental Control] button. Touch the desired rating for level control. Use this table to set the parental level.

Kid Safe Kid Safe G General Audiences PG Parental Guidance Suggested PG-13 Parents Strongly Cautioned PG-R Parental Guidance Restricted R Restricted NC-17 No One 17 And Under Admitted

Adult Only Adult

• The contents that the parental level restricts vary

with the country code.

Note: The rating can be selected only under the password unlocked status, and the limits can be set only under the password locked status.

Watching to a Disc

1. To load a disc:

Insert the disc into the center of the insertion slot the label side facing up.

CAUTION

For your safety, the driver should not insert or eject a disc, opening the operation panel while driving.

Note:

• Never insert foreign objects into the disc insertion slot.

• If the disc is not inserted easily, there may be another

disc in the mechanism or the unit may require service.

• 8cm (single play) discs cannot be used.

2. Disc starts playing automatically.

WARNING

Some videos may be recorded at higher

than desired volume levels. Increase the

volume gradually from the minimal setting

after the video has started.

Input a new password and come again. The password is set.

Note:

When a disc with view restrictions is inserted, you will be prompted to input this password. The disc will not be viewable until the correct password is entered.

NX404E

Ejecting a disc

1. To eject a disc press eject [ ] button. The play

mode then switches to the Tuner mode.

If the disc is left in the ejected position for 10

seconds, the disc is automatically reloaded. In this case, the play mode will remain in the Tuner mode.

Note: If you force a disc into before auto reloading, it may damage a disc. Change DVD System Settings

Page 18

Showing DVD Player mode screen

After disc is loaded, the play mode is automatically engaged.

Touch any place of the screen to display DVD Video menu touch the screen again to return the playback screen. The display will return to the playback screen, if you do not touch the screen for 10 seconds.

101112

1 2 3 5

14 15 16 17 18

1 - Option button 2 - Show Cursor button 3 - Previous Chapter /Fast Backward button 4 - Play/Pause button 5 - Next Chapter /Fast Forward button 6 - Elapsed playing time 7 - Seek bar 8 - Total time 9 - Menu List button 10 - System time 11 - Bluetooth status indicator

7 8 94

12 - DVD playback information 13 - Shortcut button 14 - Repeat Switching button 15 - Audio Channel switching button 16 - Subtitle switching button 17 - Angle button 18 - Direct chapter or title searching button 19 - Information button

Operate the DVD Player Menu

You can select the button items displayed in the DVD menu by directly touching it.

Play/Pause Playback

1. Touch [

2. Touch [

Skip (Search) a Chapter

1. Touch [ ] or [ ] button during playback. Chapters are skipped down or up from current

locations, as many times as the button is touched, and playback starts.

Skip use seek bar

Touch the triangle [ ] on seek bar and drag it to any position where you want to start playback.

Fast Forward/Fast Backward

1. Touch [ ] or [ ] button and hold 2 seconds to start fast backward or fast forward during playback. The playback speed starts at 2x, then will increase to 4x, 8x, and 16x. Release the button will continue playing with normal speed.

Note:

• No audio is reproduced during fast forward and fast

backward operation.

• The fast forward and fast backward speed may differ

depending on the disc.

Search function

You can locate the beginning of a scene using the chapter numbers or title numbers recorded on the DVD Video disc.

1. Showing the DVD Video menu, touch [ The Key Pad screen appears with the chapter/Title number input mode.

Touching [ chapter number input mode.

Touching [ number input mode.

• Title

A large segment to divide the data area of the disc.

• Chapter

A small segment to divide the data area of the disc.

2. Input the number of the title/chapter that you want to play with the [0] to [9] button.

3. Touch the [ Settings

] button to pause during playback.

] button again to resume playback.

] button turns the Key Pad to the

] button turns the Key Pad to the title

] button. Change DVD System

NX404E

] button.

English

Owner’s Manual

Page 19

English

Owner’s Manual

Playback starts from the scene of the input title number or chapter number.

NOTE:

*If the input title/chapter number does not exist or searching with a title/chapter number is not allowed, the screen image will not change.

4. Touch [

Repeat Playback

This operation plays back chapters recorded on the DVD-Video repeatedly.

1. Showing the DVD Video menu, touch [

2. Touch [ for Repeat Title.

3. Touch [ playback.

Using the Title Menu

On DVD discs containing two or more titles, you can select from the title menu for playback.

1. Showing the root menu of DVD Video, touch [ ] button during playback.

Touch and hold it during playback to show the title

menu.

* Depending on the disc, the title or root menu may

not be called.

2. Touch the title or root menu screen. And touch the Show Cursor button.

3. Select the items in the title or root menu screen by

* Depending on the disc, items may not be selected

with the directional buttons.

4. Touch [

5. Touch [

Switching Audio

On discs in which two or more audios or audio languages have been recorded, you can switch among the audio languages during playback.

] button to close the key pad.

] button once for Repeat Chapter, again

] button again to turn off the repeat

directional buttons.

] button to x on the selected item.

] button.

1. Showing the DVD Video menu, touch [ during playback.

• Each time you touch the button, you can switch among audio languages.

• It may take time to switch among audios.

Depending on the disc, up to 8 kinds of audios may

be recorded. For details, see the mark of the disc: (

Indicates that 8 audios have been recorded).

When the power is turned on and when the disc

is changed to a new one, the language set as the factory default is selected. If that language has not been recorded on disc the language is specied on the disc.

Depending on the disc, switching may be

completely impossible or impossible on some scenes.

] button

Switching Subtitles

On DVD discs in with two or more subtitle languages have been recorded, you can switch among the subtitle languages during playback.

1. Showing the DVD Video menu, touch [ to select a subtitle during playback. Each time you touch the button, you can switch among subtitles.

• It may take time to switch among subtitles.

Depending on the disc, up to 32 kinds of subtitles

may be recorded. For details, see the mark of the disc: (

Indicates that 8 kinds of subtitles have

been recorded).

Depending on the disc, switching may be

completely impossible or impossible on some scenes.

2. To turn off subtitles, repeat touching [ until subtitles are turned off.

] button

Displaying the playback status

Touch [ ] button on DVD Player mode screen, Playback status is displayed on screen.

Play MP4/DivX video ﬁles

This system can play video les (AVI/MP4, etc.) stored on disc.

Note:

DivX Certied

content.

to play DivX® video, including premium

Showing video ﬁles Player mode screen

1. After disc with video les is loaded, touch [Disc Video] button on MAIN MENU to show video les player mode screen.

2. Touch the screen of the playing video le to display Video les player menu touch the screen again to return the playback screen. The display will return to the playback screen, if you do not touch the screen for 10 seconds.

NX404E

Page 20

1 - Option button 2 - Previous Track /Fast Backward button 3 - Play/Pause button 4 - Next Track/Fast Forward button 5 - Elapsed playing time /Seek bar 6 - List Mode button 7 - System time 8 - Bluetooth status indicator 9 - Playback information 10 - Shortcut button 11 - Repeat button 12 - Audio button 13 - Subtitle button

4 5 6

11 12 13

Operate the Video ﬁles Player Menu

You can select the button items displayed in the Video les player menu by directly touching it.

Play/Pause Playback

1. Touch [ ] button to pause during playback.

2. Touch [

Switch to Previous/Next File

1. Touch [ ] or [ ] button during playback to play previous /next le

] button again to resume playback.

Skip using seek bar

Touch the triangle on seek bar and drag it to any position where you want to start playback.

Fast Forward /Fast Backward

Note:

*No audio is reproduced during fast forward and fast backward operation.

*The fast forward and fast backward speed may differ depending on the disc.

Repeat Playback

This operation plays back video les recorded on the disc repeatedly.

The repeat set as the factory default is Repeat all.

1. Showing the video les player menu, touch [ button.

2. Touch [ for Repeat Folder.

3.Touch [

] button once for Repeat Track, again

] button again for Repeat All.

Switching Audio

Some video les will have two or more audio channels; you can switch among the audio channels during playback.

1. Touch [

• Each time you touch the button, you can switch among audio languages.

• It may take time to switch among audios.

Depending on the disc, switching may be impossible.

] button during playback.

Switching Subtitles

Some video les will have two or more subtitles have been recorded; you can switch among these subtitles during playback.

1. Touch the [ playback.

• Each time you touch the button, you can switch among subtitles.

• It may take time to switch among subtitles.

Depending on the disc, switching may be impossible.

] button to select a subtitle during

Video Files List

Showing the Video les player menu; touch the

[

] button to display video les list screen.

Video les list operations is almost same as Disc Audio player mode. Please refer to CD Player Operations.

Play DivX Video-On-Demand File

You must complete a one-time registration process in order to play a purchased DivX movie on your DivX device.

NX404E

English

Owner’s Manual

]

Page 21

Registration is not needed to play free DivX movies

English

you create or download.

Getting DivX Registration Code and Registering Your Device

1. Touch the [Settings] button on the Main Menu to access [General] setup menu.

Owner’s Manual

2. Touch [General] setup button, and touch [DISPLAY] button on the right side of “DivX You will nd “10 digit DivX registration code on the screen.

3. Enter this code in DivX Player to create a “Registration video” disc on your PC. Once this “Registration video” disc has played on this device, registration is done, and you can enjoy some purchased DivX movies on your device.

For detail please visit “http://www.divx.com/vod”

4. Touch [OK] to close the pop-up window.

Note:

After you register your device, this setting menu is

changed to “DivX

Deregistration”

Registration”.

Deregister your device

Even after you have nished registration, you

can deregister your device if you will not watch purchased movies on this device anymore.

1. Touch the [Settings] button on the Main Menu to access [General] setup menu.

2. Touch [General] setup button, and touch [SET] button on the right side of “DivX You will be asked if you want to deregister this device, then touch [YES] in the pop-up screen.

Deregistration”.

4. Deregister this device by using the “Deregistration code” on your PC.

For detail please visit “http://www/divx.com/vod”

Playable Disc Video Formats

This system can play video les stored on disc. *.avi les

• format: Divx 4/5/6

• Picture size: 720 x 480

• Audio format: MP3

• Audio sampling frequency: 32/44.1/48 KHz

*.mp4 les:

• format: MPEG4 Visual Simple @L1

• Picture size: 720 x 480

• Audio format: AAC

• Audio sampling frequency: 32/44.1/48 KHz

*.mpg les

• format: MPEG2

• Picture size: 720 x 480

• Audio format: MP3

• Audio sampling frequency: 32/44.1/48 KHz

*.divx les

• format: Divx 3.11/4/5/6

• Picture size: 720 x 480

• Audio format: MP3

• Audio sampling frequency: 32/44.1/48 KHz

3. Note 10 digit “Deregistration code” in the pop-up screen. Keep this code until you deregister this device on your PC.

NX404E

Page 22

8. CD PLAYER OPERATIONS

Listening to a Disc/Ejecting a Disc

Please refer to Disc Video Player Operations -watching to a disc and Ejecting a disc.

Showing CD Player Mode Screen

1. After disc is loaded, the play mode is automatically engaged.

2. If disc have been loaded you can touch [Disc Audio] button on main menu to display CD player mode screen.

211

1 - Option button 2 - Elapsed playing time indicator 3 - Rotation effect 4 - Page turning button 5 - System time 6 - Bluetooth status indicator 7 - Repeat button 8 - Previous Track /Fast Backward button 9 - Shortcut button. 10 - Play/Pause button 11 - Next Track/Fast Forward button 12 - Shufe button

13 - Direct Searching button 14 - Scan Start/Stop button 15 - Rotation Effect On/Off button

16 - Song Title 17 - Artist/album Information

18 - Close option menu button

Operate the CD Player Menu

You can select the button items displayed in the CD player menu by directly touching it in list.

Play/Pause Playback

1. Touch [ ] button to pause during playback.

2. Touch [

Switch to Previous/Next ﬁle or track

Touch [ ] or [ ] button during playback to play previous /next le.

• Touching [ beginning of the next track.

• Touching [ beginning of the current track. When this button is touched again within 5 seconds, playback starts from the beginning of previous track.

Fast Forward /Fast Backward

1. Touch [ ] or [ ] button and hold more than 2 seconds to start fast backward or fast forward during playback. The playback speed starts at 2x, then will increase to 4x, 8x, and 16x. Release the button will continue playback with normal speed.

Note:

* The fast forward and fast backward speed may differ

depending on the disc.

Repeat Playback

* The repeat set as the factory default is Repeat All. Touch [

Repeat All and Repeat Track.

Shufﬂe Playback

1. Touch [ ] button to shufe the tracks during playback.

2. Touch this button again to turn off the feature.

Selecting a track on the Track List Screen

This function allows you to select tracks from a displayed list.

1. Touch the track title on the display list. The selected track will start playing.

2. When the desired track is not displayed, touch and ick the track list up or down.

3. Touch the desired track title button. The corresponding track is started playback.

] button again to resume playback.

] button starts playback from the

] button switch between Repeat Folder

English

Owner’s Manual

NX404E

Page 23

Scanning the Tracks

English

1. Touch [ ] button to show [Scan ] button.

2. Touch [Scan

• It will play from next track, and each track will display for 10 seconds.

• The [Scan

Owner’s Manual

button.

3. Touch [Scan

• It will continue playback from current track.

• [Scan button.

* The function will scan all tracks orderly in current

folder once. After Scan stopped playback will continue.

] button during playback.

] button will switch to [Scan ]

] button.

] button will switch to [Scan ]

Searching with the Track Number

This operation allows searching using the track numbers recorded on the CDs.

1. Touch [

2. Touch [ appear on the screen and touch [

3. Input the track number that you want to play back with [0] to [9] button and touch [OK] button.

Playback starts from the track of the input track number.

• If the input track number does not exist or searching with track number is not allowed, the screen image will not change.

• Touch the [ keypad.

• Touch [ display playback screen.

] button to show [ ] button.

] button .The numerical keypad will

] button will close the numerical

] button will close the option window and

Rotation Effect On/Off

This operation allows turn on/turn off rotation effect. The factory default is On.

1. Touch [

2. Touch [ effect.

3. Touch [

] button to show [Rotation effect] button

] button, will turn on the Rotation

] button, will turn off the Rotation effect.

Listening to Compressed Audio

This system can play audio les stored on disc. MP3/ WMA/ AAC

Tag Display Function

This unit is an ID3 Tag compatible model.

NX404E

] button.

This unit supports the ID3 TAGs of the Version 2.4, 2.3,

1.1 and 1.0. In displaying, this unit gives priority to the Version 2.3

and 2.4 TAGs.

Note:

• Some CDs recorded on CD-R/RW mode may not be

usable.

Displaying MP3/WMA/AAC TAG titles

Tag information can be displayed for compressed audio le containing Tag information.

MP3: title, artist, album WMA: title, artist AAC: can not display tag information.

Precautions when creating MP3 disc

• File extensions

1. Always add a le extension “.MP3” or “.mp3” to an MP3 le, and “.WMA” or “.wma” to a WMA and “.m4a” to a AAC le by using single byte letters. If you add a le extension other than specied or forget to add these le extension, the le cannot be played. In addition, if you use upper case and lower case letters (capital and small letters) mixed for le extensions, normal play may not be possible.

2. Files other than MP3/WMA/AAC data cannot be played.

Playing les with a format not supported will be

skipped, and the scan, random and repeat playback mode may be canceled.

• File and Disc Not Supported

Files and discs with following extensions are not supported: *.AAC, *.DLF, *.M3U, *.PLS, *.MP3 PRO les, les with DRM, open session discs.

• Logical format (File system)

1. When writing an MP3/WMA/AAC le on a disc, please select “ISO9660 level 1 or level 2 (without including expansion format)” as the writing software format. Normal playback may not be possible if the disc is recorded on another format.

2. The folder name and le name can be displayed as the title during MP3/WMA/AAC play .

• Entering File and Folder Names

Names using the code list characters are the only le names and folder names that can be entered and displayed. Using any other character will cause the le and folder names to be displayed incorrectly.

• Folder structure

1. A disc with a folder having more than 8 hierarchical levels will conict with the ISO9660 and playback will be impossible.

• Number of les or folders

1. The maximum allowable number of folders is 200 (including root directory); the maximum allowable number of les is 1500 (max. 200 per folder). This represents the maximum number of tracks that can be played back.

Page 24

2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC).

• Some noise may occur depending on the type of encoder software used while recording.

• In case of a track recorded at VBR (variable bit rate), the display for the play time of the track may be slightly different from the actual play time. Also, the recommended value of VBR ranges from 32 kbps to 320 kbps.

• After disc selection, the play mode is automatically engaged.

Playback MP3/WMA/AAC menu

English

Owner’s Manual

1. Repeat Playback

While playing MP3/WMA/AAC touch switch between Repeat Folder, Repeat All and Repeat Track, Repeat Folder and Repeat All.

2.Current Folder

• Showing title of current folder.

• The number on the folder symbol is the number of

les and folders number in current folder.

• Touch the title of current folder, play list will show

les and folders in upper folder.

*Other operations about playing MP3/WMA/AAC are

almost same as CD Player mode.

Stop Playback

1. Touch [

2. Touch [

Playback resumes from start of the folder which playing track is in.

•Other operations about playing MP3/WMA/AAC are

almost same as CD Player mode.

] button to stop playback. ] button again to resume playback.

button can

NX404E

Page 25

English

9. USB AUDIO OPERATIONS

This system can play audio les (MP3/WMA/AAC/ FLAC) stored in an USB memory which is recognized

Owner’s Manual

as “USB Mass Storage Class device”. You can use your USB memory as an audio device by simply copying desired audio les into it.

Note:

• This system will not operate or may operate improperly

with some USB memory.

• Files protected with any DRM cannot be played.

Notes on Using USB Memories

General notes

• When no support les, the le list display nothing.

Notes on the Audio les

• This system can play the MP3/WMA/AAC/FLAC les stored in the USB memory.

MP3 les:

• format: MPEG1/2 Audio layer3

• bit rate: 8k ~ 320kbps

• sampling frequency: 8/12/16/24/32/44.1/48KHz

• le extension: . mp3

WMA les:

• format: Windows media Audio standard L3 prole

• bit rate: 32 ~ 192KHz

• sampling frequency: 32/44.1/48 KHz

• le extension: .wma

AAC les

• format: Advanced Audio Coding LC-AAC,HE AAC

• sampling frequency: 32/44.1/48 KHz

• le extension: . m4a

FLAC les

• format: Free Lossless Audio Codec

• quantization bit rate: 16 or 24 bits

• sampling frequency: 44.1~192 KHz

• le extension: . ac

Notes on the folder structure

• The folder hierarchy must be within 8 hierarchical levels. Otherwise, playback may be impossible.

• The maximum allowable number of folders is 65535 (including root directory and folders with no MP3 les, WMA AAC/FLAC le).

• The maximum allowable number of les in a folder is 65535.

• You can store the MP3 les, WMA AAC/FLAC together in a folder.

• The system may become slow if the les or folders exceed the limitation above.

Notes on the Tag titles

The limitations on the Tag titles are same as those in CD Player mode.

Select USB Audio Mode

Connect your USB memory with MP3 les, WMA AAC/ FLAC les to the USB connector. The system will automatically detect the connected device, and the [USB Audio] button on main menu will be enabled.

• When an USB memory is already connected Touch [USB Audio] button to select the USB Audio

mode. The system changes to the USB Audio mode and

starts playback from the previous position or from the beginning.

This system has two USB connectors and can connect two USB.

The volume label of the USB is indicated on the list of USB root menu.

And you can select the desired USB by touching the list.

If there is no information of the volume label of the USB. This system indicate the USB as “My USB1”, “My USB2” on the list.

Note:

If you reconnect the same device that you disconnected

last, the system will play back where it left off.

1. Option button

2. Play/Pause button

101112

NX404E

Page 26

3. Previous Track /Fast Backward button

4. Next Track/Fast Forward button

5. Repeat button

6. Shufe button

7. MP3 les, WMA les in list

8. Folders in list

9. Page Turning button

10. System time

11. Bluetooth status indicator

12. Mute status indicator

13. Playback status information

14. Album Art

15. Shortcut button

16. Current ID3 info area

17. Elapsed playing time indicator/Seek bar

18. Direct button

19. Scan button

Playing Audio Files in USB Memory

Play/Pause Playback

1. Touch [ ] button to pause during playback.

2. Touch [

Switch to Previous/next ﬁle

Touch [ ] or [ ] button during playback to play previous /next le.

• Touching [ beginning of the next track.

• Touching [ beginning of the current track; when this button is touched again within about 5 seconds, playback starts from the beginning of previous track.

Fast Forward /Fast Backward

Touch [ ] or [ ] button and hold more than

2 seconds to start fast backward or fast forward during playback. The playback speed starts at 2x, then will increase to 4x, 8x, and 16x .Release the button will continue playback with normal speed.

Note:

*The fast forward and fast backward speed may differ

depending on the audio les.

Repeat Playback

* The repeat set as the factory default is Repeat All. Touch the [

Repeat Folder, Repeat All.

Shufﬂe Playback

1. Touch [ ] button to shufe the tracks in playing folder during playback.

2. Touch this button again to turn off the feature.

Album Art work

If current audio le contains album art image in ID3, the picture will be displayed in this area.

ID3 Information Area

This area display ID3 info of playing le: song title, artist information, album information, number of current le/total number in current folder, elapsed playing time/total time of current le.

] button again to resume playback.

] button starts playback from the

] button once for Repeat Track, again for

Skip Using Seek Bar

Touch on seek bar and drag it to any position where you want to start playback.

Select a Folder on Display List

Touch the folder title on the display list, the display list will display les and folders in selected folder.

Select a Track on the Display List

This function allows you to select tracks from a displayed list.

1. Touch the track title on the display list. The selected track will start playing.

2. When the desired track is not displayed, touch and ick the track list up or down.

3. Touch the desired track title button. The corresponding track is started playback.

Scanning the Tracks

1. Touch [ ] button to show [Scan ] button.

2. Touch [Scan

• It will play from next track, and each track will display for 10 seconds.

• The [Scan button.

3. Touch [Scan

• It will continue playback from current track.

• [Scan button.

* The function will scan all tracks orderly in current

folder once .After Scan stopped playback will continue.

] button during playback.

] button will switch to [Scan ]

] button.

] button will switch to [Scan ]

Searching With the Track Number

This operation allows searching to use the track numbers in playing folder.

1. Touch [

2. Touch [ appear on the screen.

3. Input the track number that you want to play back with [0] to [9] button and touch [OK] button.

Playback starts from the track of the input track number.

• If the input track number does not exist or searching with a track number is not allowed, the screen image will not change.

• Touch [

• Touch [ display playback screen.

] button to show [ ] button.

] button .The numerical keypad will

] button will close the numerical keypad.

] button will close the option window and

English

Owner’s Manual

NX404E

Page 27

English

10. USB VIDEO OPERATIONS

This system can play USB video les (MP4, 3GP etc.) stored in an USB memory which is recognized as “USB Mass Storage Class device”. You can use your

Owner’s Manual

USB memory as an video device by simply copying desired video les into it.

Note:

• This system will not operate or may operate improperly with some USB memory.

• Files protected with any DRM cannot be played.

Notes on Using USB Memories

General notes

When no support les, the le list display nothing.

Notes on the folder structure

The limitations on the folder structure are same as those in USB Audio Player mode.

Notes on the Tag titles

The limitations on the Tag titles are same as those in CD Player mode.

Select USB Video Mode

Connect your USB memory with video les to the USB connector. The system will automatically detect the connected device, and the [USB Video] button on main menu will be enabled.

• When an USB memory is already connected

Touch [USB Video] button on main menu to select the USB Video mode.

The system changes to the USB Video mode and starts playback from the previous position or from the beginning.

Note: If you reconnect the same device that you

disconnected last, the system will play back where it

left off.

This system has two USB connectors and can connect two USB.

The volume label of the USB is indicated on the list of USB root menu.

And you can select the desired USB by touching the list.

If there is no information of the volume label of the USB, this system indicates the USB as “My USB1”, “My USB2” on the list.

Playing Video Files in USB Memory

If the video is playing, touch the screen of the playing video to display Operation buttons.

* The display will return to the playback screen, if you

do not touch the screen for 10 seconds.

Playable Video Formats

*.mp4 les

• format: MPEG4 Visual MPEG4 AVC (H.264)

• Picture size: 1280 X 720 (MPEG4 Visual) 1920 x 1080 (MPEG4 AVC)

• Audio format: AAC

• Audio sampling frequency: 32/44.1/48 KHz

*.m4v les

• format: MPEG4 Visual MPEG4 AVC (H.264)

• Picture size: 720 x 480

• Audio format: AAC

• Audio sampling frequency: 32/44.1/48 KHz

*.mpg les

• format: MPEG2

• Picture size: 720 x 480

• Audio format: MP3

• Audio sampling frequency: 32/44.1/48 KHz

*.3gp les

• format: MPEG4 Visual H.263

• Audio format: AAC, AMR

• Audio sampling frequency: 8/16/32/44.1/48 KHz

9 8 7

1 - Previous Track /Fast Backward button 2 - Play/Pause button 3 - Next Track/Fast Forward button 4 - Elapsed playing time indicator/Seek bar 5 - Menu List 6 - Repeat button 7 - System time 8 - Bluetooth status indicator 9 - Playback information 10 - Shortcut button

Play/Pause Playback

1. Touch [ ] button to Pause playback.

NX404E

Page 28

2. Touch [ ] button to resume playback.

Switch to Previous/next ﬁle

Touch [ ] or [ ] button during playback to play previous /next le.

• Touching [ beginning of the next track.

• Touching [ beginning of the current track; when this button is touched again within about 5 seconds, playback starts from the beginning of previous track.

] button starts playback from the

Repeat Playback

* The repeat set as the factory default is Repeat All. Touch the [

for Repeat Folder, again for Repeat All.

] button once for Repeat Track, again

Skip Using Seek Bar

Touch the on seek bar and drag it to any position where you want to start playback.

Switching to USB Video Menu

Touch [ ] button playback will be paused, and the screen will switch to USB Video List.

1 - Option button 2 - Play/Pause button 3 - Previous Track /Fast Backward button 4 - Next Track/Fast Forward button 5 - Repeat button 6 - Shufe button 7 - Video les in list 8 - System time 9 - Bluetooth status indicator 10 - Mute status indicator

8910

11 - Playback status information 12 - Album Art 13 - Shortcut button 14 - Current le information area 15 - Elapsed playing time indicator/Seek bar 16 - Direct button 17 - Scan button

Play/Pause Playback

*On USB Video menu screen, playback status is pause.

Touch [ will go to video screen automatically.

] button to resume playback. The screen

Switch to Previous/next ﬁle

Touch [ ] or [ ] button during playback to play previous /next le.

• Touching [ beginning of the next track.

• Touching [ beginning of the current track; when this button is touched again within about 5 seconds, playback starts from the beginning of previous track.

] button starts playback from the

Repeat Playback

* The repeat set as the factory default is Repeat All. Touch the [

Repeat Folder, again for Repeat All.

] button once for Repeat Track, again for

Shufﬂe Playback

1. Touch [ ] button to shufe the tracks in playing folder during playback.

2. Touch this button again to turn off the feature.

Current File Information Area

This area displays information of current video le: le name, number of current le/total number in current folder, Elapsed playing time/total time of current le.

Skip Using Seek Bar

Touch on seek bar and drag it to any position where you want to start playback.

Select a Folder on Display List

This operation is same as this in USB Audio mode.

Selecting a Track on the Display List

This operation is same as this in USB Audio mode.

Scanning the Tracks

This operation is same as this in USB Audio mode.

Searching with the Track Number

This operation is same as this in USB Audio mode.

NX404E

English

Owner’s Manual

Page 29

English

11. iPod OPERATIONS

iPod/iPhone can be connected by using the connector cable supplied with the iPod/iPhone, but in

this case, you can enjoy its audio sound only. To enjoy

Owner’s Manual

video movies stored in the iPod/iPhone with video displaying them on this unit, it is required to use the special connector cable (CCA-750) separately sold.

However the new products such as iPhone 5, iPhone 5s and iPhone 5c, iPod touch iPod nano cable (no video signal output),so these new products cannot displaying video in video mode.

Note:

• This system will not operate or may operate improperly

• For detailed information on the playable iPod/iPhone

(7th generation) only can connect 10-pin

with unsupported versions.

models, see our home page: www.clarion.com

(5th generation) and

Notes on using Apple iPod/iPhone

• Do not connect an iPod/iPhone to this unit with a headphone connected to the iPod/ iPhone.

• After the iPod/iPhone has been connected to this unit, the buttons of iPod buttons are disabled for operation in the Music mode. In the Video mode, do not operate the buttons of iPod.

• When in the iPod mode, the screen image input from the AUX terminal is output to the rear monitor.

• When no data is present, the title display will remain blank.

• Set the language setting of iPod/iPhone to English before connecting your iPod/iPhone. Some characters of the other languages may not be displayed correctly in this system.

• Precautions on battery consumption:

If the iPod/iPhone is connected to this unit when the internal battery of iPod/iPhone has run down, this function may not operate correctly. You must connect the iPod/iPhone after charging the battery if it has run down.

iPod Audio Menu Operations

Connect your iPod/iPhone to the USB connector. The system will automatically detect the connected device and the iPod Audio button will be enabled for operation on the Main Menu screen.

Note:

1.This system has two USB connectors, please

connect to the USB with the label of “iPod/iPhone”.By connecting another USB cable, iPod/iPhone can’t play back the music.

2.When iOS device is connected via both USB and

Bluetooth at the same time and select iPod mode, iOS device is controlled by USB connecton.

3. When the iPod mode and operate the audio player

or internet radio other than iPod, there is a case that iPod doesn’t playback correctly. Please don’t operate the audio payer or internet radio other than Pandora when the Pandora mode.

4. During iOS device is connected by Bluetooth, and select the iPod mode, the volume level is controlled by only iOS device.

5. During iOS device is connected by Bluetooth, Album

jacket image is not displayed.

The playback starts after a while, from where the iPod/ iPhone has been paused.

• When iPod/iPhone is already connected

Touch the [ screen. The system changes to the iPod mode, and starts playback from the previous position.

Press MENU button on Operational Panel to return to the Main Menu.

] button on the Main Menu

iPod Audio ID3 Info

1 - Option button 2 - Repeat button 3 - Shufe button 4 - Previous Track /Fast Backward button 5 - Play/Pause button 6 - Next Track/Fast Forward button 7 - ID3 Information

1011

NX404E

Page 30

8 - Next Page[ ] / Previous Page[ ] button 9 - Category List 10 - System Time 11 - Bluetooth Status indicator 12 - Playback Status indicator 13 - Art Work 14 - Shortcut button 15 - Progress bar

Play/Pause Playback

1. Touch [ ] button to pause during playback.

2. Touch [

] button again to resume playback.

Switch to Previous/next ﬁle

• Touch [ ] or [ ] button during playback to play previous /next le.

• Touching [ beginning of the next track.

• Touching [ beginning of the current track; when this button is touched again within about 5 seconds, playback starts from the beginning of previous track.

] button starts playback from the

Fast Forward /Fast Backward

Touch [ ] or [ ] button and hold more than 2 seconds to start fast backward or fast forward during playback.

Note:

*No audio is reproduced during fast forward and fast

backward operation.

*The fast forward and fast backward speed may differ

depending on the audio les.

Repeat Playback

* depend on iPod.

1. Touch the [ for Repeat All.

] button once for Repeat Track, again

Shufﬂe Playback

1. Touch [ ] button to shufe the tracks in playing folder during playback.

2. Touch this button again to turn off the feature.

Album Art work

If current audio le contains album art image in ID3,

the picture will be displayed in this area.

ID3 Information Area

This area display ID3 info of playing le: song title,

artist information, album information (Genre, playlist and release time).

Category List

Select different category songs to play. The

category is same as the iPod/iPhone.

iPod Audio Playlist Mode Screen

1 - Switch to Information button 2 - Playing List 3 - Page turning button

4 - Back to father folder 5 - Close the list mode 6 - Search with the rst alphabet in current list

iPod Audio List Mode Screen

• In the ID3 information mode screen, touch the ID3 info area to switch the playing list, and in the playing list mode screen, touch the button [ the father folder. If the list is in root, touch it can close the list.

• Touch the button[ the list is in root, touch it can close the list.

• Touch the button [ the ID3 information mode.

] to back to the father folder. If

] to close the List and back to

] can back to

English

Owner’s Manual

NX404E

Page 31

Simple Control Mode

English

Owner’s Manual

1 - Simple Control button 2 - Video Mode button

• If the Simple Control is set to [

the screen will become Simple Control Mode. It can also display the video of iPod/iPhone regardless it is iPod Audio or iPod Video mode. But only “Previous Track”、“Play/Pause” and “Next Track” can be operated.

• Touch [

]the video will play from iPod.

] in option menu,

previous track.

Note: In Simple Control Mode, the best way is to control the iPod just on iPod.

Selecting a list item from a list screen

(1). Touch the list screen and ick up or down to scroll the list. (2). Touch a desired list item on the screen to display the corresponding list of tracks.

(3). Touch the desired track name on the list to play it.

Skipping a Track (Simple Control Mode)

Touch the [ ] or [ ] button during playback. Tracks are skipped, as many times as the button is touched, and playback starts.

• Touching the [

beginning of the next track.

• Touching the [ beginning of the current track.

When this button is touched again within about 5 seconds, playback starts from the beginning of the

NX404E

] button, starts playback from the

Page 32

iPod Video Menu Operations

Connect your iPod/iPhone to the USB connector. The system will automatically detect the connected device and the iPod Video button will be enabled for operation on the Main Menu screen.

• When an iPod/iPhone is already connected

Touch the [ screen. The system changes to the iPod Video mode, and starts playback from the previous position.

Touch MENU button on Operational Panel to return to the Main Menu.

• Viewing video data in the iPod/iPhone (only for the iPod/iPhone with video features)

When you connect an iPod/iPhone with video features by using the optional connector cable for iPod/iPhone with video, you can enjoy the video data and slide show data stored in the iPod/iPhone and show them on the display of this unit (and the rear monitor if connected).

] button on the Main Menu

iPod Video ID3 Mode Screen

910

10 - Bluetooth Status indicator 11 - Playback Status indicator 12 - Art work 13 - Shortcut button 14 - Progress bar

Play/Pause Playback

1. Touch [ ] button to pause during playback.

2. Touch [

] button again to resume playback.

Switch to Previous/Next File

• Touch [ ] or [ ] button during playback to play previous /next le.

• Touching [ beginning of the next track.

• Touching [ beginning of the current track.

] button starts playback from the

Repeat Playback

* The repeat set as the factory default is depend on iPod/iPhone.

1. Touch the [ for Repeat All, again for Repeat Off.

Album Art work

If current audio le contains album art image in ID3,

the picture will be displayed in this area.

] button once for Repeat One, again

ID3 Information Area

The area is display the title of the playing le.

Category List

Select different category songs to play. The

category is same as the iPod/iPhone.

English

Owner’s Manual

1 - Option button 2 - Repeat button 3 - Previous Track button 4 - Play/Pause button 5 - Next Track button 6 - Playing File Title 7 - Category list

8 - Next Page[ 9 - System time

] / Previous Page[ ] button

iPod Video List Mode Screen

This operation is same as this in iPod Audio mode.

NX404E

Page 33

English

iPod Video Simple Control Mode Screen

Owner’s Manual

This operation is same as this in iPod Audio mode.

iPod Video Play Mode Screen

1 - Previous Track /Fast Backward button 2 - Play/Pause button 3 - Next Track/Fast Forward button 4 - Progress bar 5 - Menu List button 6 - Repeat button 7 - System time 8 - Bluetooth status indicator

9 - Playback information

4 5

Play/Pause Playback

1. Touch [ ] button to pause during playback.

2. Touch [

] button again to resume playback.

Switch to Previous/Next Track

• Touch [ ] or [ ] button during playback to play previous /next track.

• Touching [

] button, starts playback from the

beginning of the next track.

• Touching [ beginning of the current track; when this button is touched again within about 5 seconds, playback starts from the beginning of previous track.

beginning of the current track.

] button, starts playback from the

Fast Forward /Fast Backward

Touch [ ] or [ ] button and hold more than 2 seconds to start fast backward or fast forward during playback. Release the button will continue playback with normal speed.

Note:

*No audio is reproduced during fast forward and fast

backward operation.

*The fast forward and fast backward speed may differ

depending on the audio les.

Repeat Playback

* The repeat set as the factory default is Repeat Off. Touch the [

for Repeat All, again for Repeat Off.

Note:

The operation in iPod video mode are as same as iPod Audio mode. Please refer to the iPod Audio Mode

operation.

Note:

Video playback is not available on all iPod/ iPhone

devices. Please contact your Clarion dealer for details.

An optional connection cable or accessory may be

required for this feature.

Note:

• “AUDIO ONLY” is displayed when the automobile is

moving.

• Image data may not be played back according to the

status of the iPod/iPhone

• The volume setting of video data is relatively lower than

audio data. Be sure to lower the volume setting before switching to the other mode.

• Do not select the categories with no track registered

from the iPod menu screen. The iPod/iPhone may be frozen. If the iPod/iPhone is frozen, reset the iPod/ iPhone by following the procedure described in the instruction manual of the iPod/iPhone.

• Audio may be played back slightly out of

synchronization with video images.

] button once for Repeat One, again

iPod Audio Bluetooth Mode

When your iPod/iPhone have connected via bluetooth to this unit, you can also enter iPod Audio mode. The operation is same as the normal iPod Audio mode.

NX404E

Page 34

12. Bluetooth® AUDIO PLAYER OPERATIONS

English

Some Bluetooth cellular phones have audio features, and some portable audio players support the Bluetooth feature. These devices will be called as “Bluetooth audio players” in this manual. This system can play audio data stored in a Bluetooth audio player.

Note:

•Thissystemwillnotoperateormayoperateimproperly withsomeBluetoothaudioplayers.

•FordetailedinformationontheplayableBluetooth audioplayers,seeourhomepage:www.clarion.com

Selecting the Bluetooth Audio Mode

1. Touch the [Bluetooth Audio] button to select the

Bluetooth Audio mode. The system changes to the Bluetooth mode. If the

connection with a Bluetooth audio player has been already established, you may select the Music function.

2. Touch MENU button on Operational Panel to return

to the Main Menu.

• WhentheconnectionwithblueiconaBluetooth

audio player has been established, the [ displayed at the top of the screen.

] icon is

Registering your Bluetooth audio player (Pairing)

You can register up to 5 Bluetooth audio players. Your mobile phone Bluetooth version is under 2.0. Please input PIN code “0000”.

1. Turn on the power of the Bluetooth audio player you wish to register.

2. Touch the Device button [ Select screen.

3. Touch the [ ] button to display the Inquiring Device screen.

] to display the Device

English

Owner’s Manual

Bluetooth Audio Player Settings

You can conﬁrm various information concerning about the Bluetooth Interface features.

1. Touch the [ the screen.

2.WhenyounishconrmingtheBluetooth

information, touch the [ previous screen.

] button to display the information on

] button to return to the

4. Touch your desired device button and touch [ ] button to register for the Bluetooth audio

player. Then select an image of this device.

NX404E

Page 35

And select a type of this device.

English

Owner’s Manual

Whenthepairingoperationcompletes,theregistered

Bluetooth audio player is set as the current device, after selecting the favorite icon, the display return to the device list screen. Touch [ will return to the Bluetooth audio mode screen.

• To delete the Bluetooth audio player registration

1. Touch the [ A conﬁrmation screen is displayed.

2. Touch the [

] button to delete the device.

] button to conﬁrm delete.

] button, the display

Selecting the Bluetooth Audio Player

To change the current Bluetooth audio player to the other device which is already registered, perform the following operation.

1. Touch the device button to [ Select screen.

2. Touch the currently connected device button, then touch the [ device.

3. Touch the desired device button you wish to use. Touch [ device. The corresponding cellular phone is set as current telephone.

4. Touch the [ screen.

] button to disconnect the active

] button to select it as your active

] button to return to the previous

] display the Device

Note:

•Occasionally,dependingontheenvironment,playback soundsmaybefragmented,orswitchnoisesmaybe generated.

Playing a Music

After the connection with a Bluetooth audio player is established, the play mode is automatically engaged.

• Whenplaybackisnotstartedforsomedevices,

touch the [

] button manually.

Pausing Playback

1. Touch the [ ]buttonduringplayback.

Playback Pauses.

2.Toresumeplayback,touchthe[ ] button.

Playbackresumes.

Skipping a Track (searching)

3. Touch the [ ] or [ ]buttonduringplayback.

Stopping Playback

4. Touch the [ ]buttonduringplayback.

Tracksarestopped,touchthe[ playbacktherstTrack.

] button to

Show Track List

5. Touch the [ ]buttontoshowthecurrenttrack

list. Touch the [

Andyoucanplaybackanytracksbytouchtheitems

in the list.

] button to show all of the lists.

Controlling the Bluetooth Audio Player

NX404E

Page 36

13. Bluetooth®

TELEPHONE OPERATIONS

English

When the connection with your Bluetooth cellular phone is established, the following functions are available on this unit:

• Listening to your telephone calls on the car speakers.

• Answering to an incoming call.

• Making a call using the Ten-Key pad screen.

• Making a call using the Phone Book data in the selected cellular phone.

• Making a call using the History data of the dialed/ received calls.

Note:

• Some cellular phones may not be able to transfer the

Phone Book data to head unit.

• The Phone Book data transmission may take a long

time. The operations of sending calls are disabled during the data transmission.

Select the BT Phone Mode

1. Touch the [Bluetooth Telephone] button to select the Bluetooth Telephone mode.

The Telephone screen is displayed.

2. Touch MENU button on Operational Panel to return to the Main Menu.

• When no Bluetooth Telephone connected, the icon

[

] is displayed at the top of the screen.

• When the connection with a Bluetooth Telephone has been established, the icon [ indicator are displayed at the top of the screen.

] and signal level

1. Touch the [ the screen.

2. Perform setting for the desired item. See the following sections for detail.

3. When you nish conrming the Bluetooth information, touch the [ previous screen.

Setting Automatic Connection

The system automatically reconnects the cellular phone after the connection is lost or the system is restarted.

• The factory default setting is “ON”. Touch the

[

] or [ ] button of the Automatic Connection

item to set the function ON or OFF.

Setting Automatic Answer

If a call comes in, answer automatically after 5 seconds.

• The factory default setting is “OFF”. Touch the

] or [ ] button of the Automatic Answer item

[

to set the function ON or OFF.

Setting Microphone Gain

You can adjust the input level of the microphone in 16 levels.

• Touch the level indicator button of the Microphone Gain item to adjust the input level.

Note:

• The input level of the microphone can be affected by

its surroundings. Adjust the level if the person on the

other end of the telephone has a reception problem.

] button to display the information on

] button to return to the

English

Owner’s Manual

Bluetooth Telephone Settings

You can conrm various information concerning about the Bluetooth Interface features.

NX404E

Page 37

Registering Your Cellular Phone

English

(Pairing)

You can register up to 5 cellular phones. The registering method is as same as “Registering your Bluetooth audio player”.

Your mobile phone Bluetooth version is under 2.0.

Owner’s Manual

Please input PIN code “0000”.

1. Turn on the power of the cellular phone you wish to register.

2. Touch the device button [ Select screen.

3. Touch the [ ] button to display the Inquiring

Device screen.

] to display the Device

When the pairing operation completes, the

registered cellular phone is set as the current telephone, and the display returns to the Telephone screen.

• To delete the cellular phone registration

1. Touch the [ A conrmation screen is displayed.

2. Touch the [

] button to delete the device.

] button to conrm delete.

Select the Cellular Phone

To change the current cellular phone to the other device which is already registered, perform the following operation.

1. Touch the [ screen.

2. Touch the currently connected device, then touch

[

3. Touch the desired device button you wish to use. Touch [ device. The corresponding cellular phone is set as the current telephone.

• If the power of the cellular phone is not turned on, turn it on.

• The cellular phone may prompt to acknowledge the Bluetooth connection or to enter the Pass Key code of this unit. Perform these operations according to the message displayed.

4. Touch the [ screen.

] button to display the Device Select

] button to disconnect the active device.

] button to select it as your active

] button to return to the previous

4. Touch your desired Cellular button to select the button for the cellular phone to be registered, and touch [ cellular phone.

• You cannot select the Cellular button of which

another cellular phone is already registered. Select a blank Cellular button.

5. If entering the Pass Key code is prompted on your cellular phone, enter the Pass Key code set in this unit.

• You can change the Pass key setting of this

unit from the Bluetooth Info screen under the Telephone Settings screen.

] button to register for the Bluetooth

NX404E

Obtaining the Phone Book Data

Sending the Phone Book data from the cellular phone enables you to make a call using the Phone Book function from this unit.

Telephone Operations

Making a call using the Ten-Key pad

1. Touch the [ ] button to display the Ten-Key pad screen.

2. Enter the telephone number by using the Ten-Key pad displayed on the screen.

Page 38

3. Touch the [ ] (Send) button to call the entered number.

• The following Telephone Interrupt screen is displayed during phone call.

• Touch the [ ] button to talk by using the cellular phone and canceling the hands-free function (Private Mode). To return to the hands-free mode, touch the [

• Touch the [ Now you can hear the other side, but the other side cannot hear your side.

• Touch the [ now you can answer to the other incoming call. Touch again to talk with previous call

If during a call with a third-party call, you can keep

the current call to answer a third party or hang up the current call to answer a third party. You can also ignore the third-party calls.

] button again.

] button to mute the microphone.

] button to hold the current phone call,

Making a Call Using the Phone Book

You can use the Phone Book data obtained from the cellular phone to make a call from this unit.

Note:

• Before using this function, the Phone Book data must

be sent from the cellular phone.

• Only the Phone Book items with at least one telephone number registered in the captured Phone Book data are displayed on the Phone Book screen.

1. Touch the [

screen.

2. Touch the desired name button you wish to dial.

• Flick the list up and down to scroll the list.

3. Touch the [

number. The Telephone Interrupt screen is displayed, and calling starts.

• When the call is nished, touch the [

to hang up.

] button to display the Phone Book

] button to call the specied

] button

Making a Call Using the History

The system will memorize the Dialed/Received calls record data in the memory. You can conrm it and use it to make a call from this unit.

1. Touch the [

displayed.

• The items are sorted by Dialed, Missed and

Received calls.

• Flick the list up and down to scroll the list.

2. Touch the desired History item button you wish to

dial.

3. Touch the [

number. The Telephone Interrupt screen is displayed, and calling starts.

• When the call is nished, touch the [

to hang up.

] button. The History List screen is

] button to call the specied

] button

Answering to an incoming call

When a call comes in, the following Telephone Interrupt screen appears.

English

Owner’s Manual

4. When the call is nished, touch [ ] button to hang up.

Note:

• Depending on some special cellular phone, the

Telephone Interrupt screen may be closed and the connection with this system may be disconnected when entering the Private mode.

You can answer to the incoming call on this system by the following operation.

1. Touch the [

2. When the call is nished, touch the [ to hang up.

] button to answer the call.

] button

NX404E

Page 39

English

14. TUNER

OPERATIONS

Listening to the Tuner

1. Touch the Tuner button on the Main menu display. The tuner mode screen is displayed.

Owner’s Manual

2. Touch the [FM1/FM2/FM3/AM] button to select the radio band. Each time the button is touched, the radio reception band changes in the following order: FM1->FM2->FM3->AM -> FM1...

113

1. Preset Scan button

2. Seek Down

3. Seek Up

4. Step Down

5. Step Up

6. Frequencies display

7. System time

8. Bluetooth status indicator

9. Preset list

10. DX/Local indicator

11. Band button

12. Shortcut button

13. Option button

Seek Tuning

1. Touch the [FM1/2/3/AM] button to select the radio band (FM or AM).

2. Touch the [

• When Touch the [

in the direction of higher frequency.

• When Touch the [ in the direction of lower frequency.

] or [ ] button

] button, the station is searched

Step Tuning

1. Touch the [FM1/2/3/AM] button to select the radio band (FM or AM).

2. Touch the [ tune up or down by one step.

] or [ ] button in frequency menu to

Recalling a preset station

1. Touch the [FM1/2/3/AM] button to select the desire band (FM or AM) on the tuner.

2. Touch the preset station (1 to 6) on Preset list.

Manual memory

1. Touch the desired band button to select the band you wish to store.

2. Tune to a station you want to store using the seek tuning, step tuning, or preset tuning.

3. Touch and hold the desired Preset button you want to store for about 2 seconds.

8910

Auto Store

The Auto Store is a function for storing up to 6 stations that are automatically searched in sequentially. If the number of receivable stations cannot reach to 6, the previous stored station remains.

1. Touch the [FM1/2/3/AM] button to select the

desired band. (FM or AM)

2. Touch the [ button to start the Auto Store.

A beep sounds and the stations with good reception are stored automatically to the preset list.

Notes:

1. After auto store, the previous stored stations will be

overwritten.

2. The unit has 4 bands, but FM3 and AM can store by

Auto Store function.

] button, and then touch the [ ]

Preset Scan

The Preset Scan receives the stations stored in the preset memory in order. This function is useful when searching for the desired station in memory.

1. Touch the [FM1/2/3/AM] button to select the desired band. (FM or AM)

2. Touch the [

The unit starts scanning each station for 10 seconds sequentially. But the station stored is not a valid station; the scanning time is only 2 seconds.

3. When the desired station is tuned in, touch the

[

] button again to stay in that station.

] button to start the Preset Scan.

DX/Local Setting

The DX / Local setting changes the tuner sensitivity in order to separate closely spaced stations. This feature is useful in areas that have many radio stations in close proximity.

1. Touch the [ ] button to switch to local tuner sensitivity.

2. Touch the [ sensitivity.

] button to switch to DX tuner

NX404E

Page 40

15. TV

OPERATIONS

English

When TV device connect to unit, you can watch TV program and operate DVB-T device. Different DVB-T device have different operate mode, please read the user manual of the DVB-T device connected

to unit. This function is available when a DVB-T Black Box is connected. This unit can control the following DVB-T Black Box: (DTX502E) *DTX502E is sold separately.

Note:

For your safety, the unit has a safety function, which turns off the picture when car is moving, so only the audio can be heard. The picture can be only watched, when the car is stopped and parking brake is applied.

Switching to DVB-T mode

• Touch [TV] key on Main Menu to select desired mode (when unit is reading). The LCD will display the external video. If there is no DVB-T signal, it will show you blank screen.

• Press [Menu] button on Operational Panel to return to the Main Menu.

English

Owner’s Manual

NX404E

Page 41

English

16. DAB

OPERATIONS

Setting to DAB

Before using DAB system, please set the adjust in Settings.

Owner’s Manual

Please select “DAB” in DAB/TV(Option) of Settings toactivate DAB icon on Main menu.

Listening to the DAB

1. Touch the DAB button on the main menu display. The DAB mode screen is displayed.

2. Touch the [DAB1/DAB2/DAB3] button to select the DAB band. Each time the button is touched, the DAB reception band changes in the following order: DAB1->DAB2->DAB3->DAB1 -> DAB2...

Note:

1. DAB is not broadcast everywhere.

2. This content is optional. If you connect DAB unit, you can use DAB feature.

3. DAB unit is sold separately.

1. DAB Information display

2. Option button(open/close)

3. Preset Scan button

4. Previous Ensemble/Seek button

5. Next Ensemble/Seek button

6. Previous Service in Current Ensemble button

7. Next Service in Current Ensemble button

8. List Page Down button

9. List Page Up button

10. Preset List/Service List Switch button

NX404E

1112

11. Service List display in each category (Preset / Ensemble / PTY)

12. Preset number/Channel number/Service number/ FM Link display

13. DAB band button

14. Srevice List Update button

15. Service Link Mode button

16. Software version display

Seek Tuning

You can tune to the Ensemble and select the Service which is currently broadcast.

1. Touch the [ next ensemble station manually step by step.

2. Long touch the [ to previous or next available ensemble station.

3. Touch [ previous or next Service in current Ensemble.

76543

Notes:

Total number and the current service number of the current Ensemble is displayed just below the Ensemble frequency display, as in the way “1/16”.

Preset List/Service List Display

You can select the list from Preset List, Ensemble List or PTY List.

1. Touch the [ ] button to select the list

you want to display.

2. When you select “Preset”, the list area displays preset services for each DAB Band. If you touch service in the list, you can listen to respective service in this list. If you touch and hold in the list, you can store current service in this list.

Preset List will not be changed by Service Scan operation.

3. When you select “Ensemble”, the list area displays Ensemble list which were stored by Service Scan. By selecting each Ensemble in the list, it will show the Services in this Ensemble. If you select “ALL Service”, you can see all Services in all Ensembles. To go back to Ensemble list just touch “back” button.

4. When you select “PTY”, the list area displays PTY category list from NEWS, SPORT, CULTURE, POP and OTHERS. By selecting each PTY in the list, it will show the Services in this PTY category. To go back to Ensemble list just touch “back” button.

Note:

If you want to update the services in Ensemble list and PTY list with current broadcasting, please perform Service Scan.

] or [ ] button to tune to previous or

] or [ ] button to seek and tune

] or [ ] button to select and tune to

Page 42

Service Scan

When you want to update the list with the current services in Ensemble List or PTY List, please perform Service Scan.

1. Touch the option button [ display.

2. In Option Menu, touch the [Start] button.

3. Touch the [OK] button to start updating the service

list, touch the [Cancel] button to cancel this operation then back to previous menu.

4. When scanning the services, this image will display.

Notes:

After service scan, currently available services will be updated in the Ensemble List and PTY List.

] to open option menu

Preset Scan

Preset Scan tunes to the Services stored in the preset list in order.

1. Touch the [DAB1/2/3] button to select the desired band.)

2. Touch the [ The unit starts scanning each service for playing 10 seconds sequentially.

3. When the desired service is tuned in, touch the[ button again to stay in that service.

] button to start the Preset Scan.

Service Link Setting

You can select Service Link mode from On or OFF. If this setting is set to On, and current Service signal gets weak, it is to be linked to the service with better signal.

1. Touch the option button[ display.

1. Touch the [

] button to switch On or OFF.

] to open option menu

Note:

If the service is linked to the FM station, the FM indicator will be turned on.

English

Owner’s Manual

]

DAB Band

When touch the DAB band button, the band will change as below DAB1->DAB2->DAB3->DAB1···

NX404E

Page 43

English

Wire

Connection

HDMI

Mode

can be connected by using the connector cable supplied with the and HDMI cable (sold in the market) or CCA-770 and digital Av adapter.

(1) Connection with the iPhone 4/4S

NX404E

iPhone 4/4S

Apple Genuine 30pin-Digital AV adapter

(3) Connection with the Android Phone

NX404E

Apple Genuine 30pin cable

Micro USB cable sold in the market

MHL adaptor sold in the market

(2) Connection with the iPhone 5

NX404E

iPhone 5

Apple Genuine Lightning-Digital AV adapter

Apple Genuine Lightning

cable

HDMI cable sold in the market or ★CCA-770

HDMI cable sold in the market or

★

CCA-770

HDMI cable sold in the market or

★

CCA-770

(4) Connecon with the equipment with HDMI output

NX404E

Electronic devices with HDMI output

HDMI cable sold in the market

iPhone 4/4S/5/5s/5c

Owner’s Manual

17. HDMI

Note: The following is part of the wiring example.

Depending on the device, there is a case to connect to the device directly with the CCA-771. Depending on the adapter or device, there is a case that the audio noise and video noise is generated.

MODE

NX404E

Page 44

Select HDMI source

When a device is connected for the rst time.The calibration will show up automatically.

This HDMI mode is only indicate the screen of the iPhone, Android. Can‘t operate by the touch screen of NX404E

English

Owner’s Manual

Note: Depending on the application and model of the

mobile phone, there is the case that black frame appears around the screen.

NX404E

Page 45

English

18. AUX

External peripheral devices, including a game console, camcorder, navigation unit, iPod/iPhone, etc. can be connected to the AUX connector on the front or back of this unit using the A/V media cables.

Owner’s Manual

Switching to AUX IN

Touch [AUX1] /[AUX2] button on Main Menu to select desired mode (when unit is reading). If the external device connected to AUX input have audio signal, the unit will broadcast audio of external device. Touch Menu button on Operational Panel to return to the Main Menu. You cannot directly control external devices connected to AUX input.

19. CAMERA INPUT OPERATIONS

Switching to Camera mode

Touch [Camera] button on Main Menu. The LCD will display the external camera video. The screen will display “No Video Signal” message, if a valid

camera is not connect to this head unit. Touch MENU button on Operational Panel to return to the Main Menu.

Note:

If the reverse cable is connected correctly to the car, this unit goes to camera mode automatically when the car is in

reverses.

NX404E

Page 46

20. REAR SOURCE OPERATIONS

English

If a monitor is installed in the rear zone and connected to the rear zone AV output, passengers in the back seat can watch the DVD/iPod Video/AUX1/ AUX2 video separately from front source.

1. Touch the button to access the front source. Touch the button to close the rear source.

Multi-Zone Operation

Independent sources can be played simultaneously on the unit. For example, a FM/AM console can be playback on the front screen while DVD video is available to rear passengers. But now can’t select DVD video in front.

Access Rear-Zone

1. Touch the Rear button on Main Menu to access the Rear Source.

2. Select a source to play.

Exit Rear-Zone

Touch the 2-Zone off button to close the Rear Source.

Note:

1. If the source is selected as the front, the source in rear can’t be selected.

2. If the source is selected as the rear, the source in front can’t be selected.

3. Touch the Front button to access the main menu but not close the Rear Source.

1 -Option button 2 -Show Cursor button 3 -Previous Chapter /Fast Backward button 4 -Play/Pause button 5 -Next Chapter /Fast Forward button 6 -Elapsed playing time 7 -Menu List button 8 -Front/Rear button If the screen displays Rear Source, touch Front/Rear

button to switch to Front Source. If the screen displays Front Source, touch Front/Rear

button to switch to Rear Source.

DVD Video Rear Source Control Information Mode.

Touch BACK button to return.

DVD Video Rear Source Control Direct Mode.

English

Owner’s Manual

DVD Video in Rear

1 2 3 4 5 6 7

NOTE: More detail please refer to DVD Video Front source.

NX404E

Page 47

English

Owner’s Manual

AUX1

AUX2

iPod Video Rear Source ID3 Mode

iPod Video in Rear

iPod Video Rear Source Control Play Mode

1 2 3 4 5 6

1 - Previous Track /Fast Backward button 2 - Play/Pause button 3 - Next Track/Fast Forward button 4 - Progress bar 5 - Menu list button: Touch the Menu button to display the iPod Video Rear Source mode screen. 6 - Repeat button: Same as iPod function of front source 7 - Front/Rear button If the screen displays Rear Source, touch to switch to Front Source. If the screen displays Front Source, touch to switch to Rear Source.

NOTE: If the source is selected as the front, the source in rear can’t be selected. If the source is selected as the rear, the source in front can’t be selected. Touch the Front button to access the front main menu but the rear source will keep running.

TV in Rear

Note:tV fuNctioN depeNds oN the locatioN of your area. please coNsult the local suppliers.

•Enter Touch the TV button on the Main menu display. The TV mode screen is displayed.

•Exit Choose the other operations will exit TV mode. Specic operations please consult the TV user manual.

Different digital TV boxes include different operations.

NX404E

Page 48

21. SETTING OPERATIONS

English

Touch [ ] button on the Main menu screen. The Setting menu screen will be displayed.

General Setup Menu

System Language: Set the Language for system screen.

Illumination Color: Set the illumination color on the panel.

Select menu to be able to select from Shortcut menu and drag it to left side area.

Time: Set system clock.

24-Hour Format: Set the time display mode.

Beep: Turn on or turn off the beep conrmation sound. Bluetooth: Set the Bluetooth On or Off. Wallpaper: Choose the desired wallpaper.

Input Aux Sense: AUX input switch, including Low,

Middle, High.

DivX

Registration: Display the information about

registration.

DivX Tel Speaker: There are two options, Left and Right.

For example, if current setting is Right, when BT phone is coming in, only right speaker can hear the phone.

Version: Display the software version information.

Note:

• Time and 24-Hour Format can be adjusted when set the system time not to be synchronized with GPS local

time.

English

Owner’s Manual

Video Setup Menu

This menu includes: DVD Wide Screen Mode; Dimmer. Dimmer Mode

NX404E

Page 49

DVD Wide Screen Mode: Set the DVD wide screen

English

mode On or Off.

Dimmer: Set Dimmer value from 0 to 20. Dimmer Mode: There are three options, Day, Night

and Auto.

Audio Setup Menu

Owner’s Manual

This menu includes: Balance, Fader, Beat EQ, Sub Woofer Ctrl, Sub Woofer Phase, High Pass Filter Low Pass Filter, Line Out and Magna Bass EX.

Balance: Choose the desired volume for left and right speaker.

Fader: Choose the desired volume for front and rear speaker.

Beat EQ: Choose the desired mode: Bass Boost, Impact, Excite, Custom and OFF.

Subwoofer Ctrl: Choose the desired subwoofer gain from 0 to 14.

Subwoofer Phase: Choose the Subwoofer Phase normal or reverse.

High Pass Filter: Choose the frequency about the high pass lter or enable. The frequencies include 60Hz, 90Hz and 120Hz.

Low Pass Filter: Choose the frequency about the low pass lter or enable. The frequencies include 60Hz, 90Hz and 120Hz.

Magna Bass EX: Choose the loudness On or Off.

This menu includes: GPS Time, Navi Interrupt, Voice Guidance.

GPS Time: Set the system time to be synchronized with GPS local time or not.

Navi Interrupt: There are three choices: On/Popup/ Off. “On”: The navigation screen will cover to AV screen when reaching some button point. “Popup”: When small turn info window will pop up in the top of the AV screen to indicate the button point. “Off”: Turn off this function.

Voice Guidance: There are three choose: On/Mute/ Off.

On: Interrupt function of voice guidance is on. While interrupting no attenuate function of AV sound.

Mute: Interrupt function of voice guidance is on. While interrupting attenuate function sound is on.

Off: Disable the navigation voice guidance.

Others Setup Menu

Navigation Setup Menu

NX404E

This menu include: Set Password; Parental Control; Audio Language; Subtitle Language; Screen Calibration and Factory Default.

Set Password: Set the password for DVD parental control.

Parental Control: Set the rating of the age. It contains Kid Safe/G/PG/PG- 13/PG-R/R/NC- 17/Adult.

Page 50

Audio Language: Set the Language for DVD Audio. Subtitle Language: Set the Language for DVD subtitle. Blinking LED: Set blinking LED On or Off. Screen Calibrate: The function of it is to select the TS

Calibrate YES or NO. Factory Default: The function is to select to load

factory default or not.

Set the Anti-Theft code

1. If your unit is unlocked, hold the [ ] button more than 2 seconds, then the Anti-Theft setting mode will display. Users can change anti-theft code.

Touch [YES], the numerical keypad is displayed.

Enter the new password twice, then anti-theft code is set and your unit is secured.

When the Anti-theft is “On”, you need enter correct

Anti-theft code to turn the unit on. If you enter wrong code three times, the unit is locked, and must be unlocked by the professionals.

English

Owner’s Manual

2. If your unit is secured, hold the [ than 2 seconds, then the Anti-Theft setting mode will display. The numerical keypad is displayed, enter the right code to unlock.

Note:

If the anti-theft code is lost or forgotten, a charge will be incurred at the owner’s expense by a Clarion service station to unlock the NX404E.

] button more

NX404E

Page 51

English

22. TROUBLESHOOTING

GENERAL

Problem Cause Measure

Owner’s Manual

Power does not turn on. (No sound is produced.)

Nothing happens when buttons are touched.

Display is not accurate.

The remote control unit does not work.

Fuse is blown. Replace with a fuse of the

Incorrect wiring. Consult your installation center.

The microprocessor has malfunctioned due to noise, etc.

Direct rays of the sun fall on the light-receptive part of the remote control unit.

The battery of the remote control unit is dead or there is no battery in the remote control unit.

same amperage. If the fuse blows again, consult your store of purchase.

Touch the reset button with a thin rod.

Note:

When the Reset button is

touched, turn o the ACC

power.

* When the Reset button is touched, frequencies of radio stations, titles, etc. stored in memory are cleared.

When direct rays of the sun fall on the light-receptive part of the remote control unit, it may not work.

Check the battery of the remote control unit.

DVD PLAYER

Problem Cause Measure

Disc cannot be loaded. A disc is already loaded. Eject the disc before loading

There is foreign matter already in the disc slot.

Sound skips or is noisy. Disc is dirty. Clean the disc with a soft cloth.

Disc is heavily scratched or warped.

Sound is bad directly after power is turned on.

Video images are not displayed.

Disc cannot play with the display “PARENTAL VIOLATION” shown.

NX404E

Condensation may form on the internal lens when the car is parked in a humid place.

The parking brake is not engaged.

Feature exceeds set parental level.

the new one.

Remove the foreign matter, or consult a service station.

Replace with a disc in good condition.

Let dry for about 1 hour with the power on.

Check that the parking brake is engaged.

Release the view limitation or change the parental level. See the subsection “Setting up the parental level”

Page 52

USB DEVICE

Problem Cause Measure

USB device cannot be inserted. The USB device has been

USB device is not recognized. The USB device is damaged. Disconnect the USB device

No sound heard with the display “NO FILE” shown.

Sound skips or is noisy. MP3/WMA les are not

The video image of iPod/ iPhone is disturbed.

inserted with wrong direction.

The USB connector is broken. Replace with a new USB

Connectors are loose.

No MP3/WMA le is stored in

the USB device.

encoded properly.

The TV Signal setting of the iPod/iPhone is not set correctly.

Reversing the connection direction of the USB device, try it again.

device.

and reconnect. If the device is still not recognized, try

replacing with a dierent USB

device.

Store these les properly in the

USB device.

Use MP3/WMA les encoded

properly.

Set the TV Signal setting (NTSC/PAL) of the iPod/iPhone correctly.

Bluetooth

Problem Cause Measure

Cannot pair the Bluetooth enable device with the car audio system.

The audio quality is poor after connection with a Bluetooth enabled device.

The device does not support

the proles required for the

system.

The Bluetooth function of the device is not enabled.

The Bluetooth reception is poor.

Use another device to connect.

Refer to the user manual of the device for how to enable the function.

Move the device closer to the car audio system or remove any obstacle between the device and the system.

English

Owner’s Manual

NX404E

Page 53

TFT screen

English

Problem Cause Measure

The image is not displayed. The parking brake is not

Owner’s Manual

The display is dark. The Dimmer control is too low. Adjust the Dimmer properly.

There are red, green, and blue points in display.

engaged.

The operating condition is not good.

The headlight of the vehicle is lit

-------------------- This is not a failure, but a

Check that the parking brake is engaged.

The temperature inside the vehicle may be 0°C or lower. Set to an appropriate temperature (25°C or so) and check it again.

The display is made dark at night to prevent the glare (When the headlight of the vehicle is lit in the daytime, the display gets dark).

phenomenon peculiar to a liquid crystal panel (The liquid crystal panel is produced according to technology with very high precision. Note that,

though there are eective

pixels of 99.99% or more, pixel missing or normally lit pixels account for 0.01%).

NX404E

Page 54

23. ERROR DISPLAY

English

If an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem.

DVD PLAYER

Display Cause Measure

BAD DISC A disc is caught inside the DVD

deck and is not ejected.

BAD DISC A disc cannot be played due to

scratches, etc.

BAD DISC A disc is loaded upside- down

inside the DVD deck and does not play.

PARENTAL VIOLATION Parental level error Set the correct Parental level.

Disc Region incorrect Region code error Eject the disc, and replace

This is a failure of DVD deck’s mechanism and consult your store of purchase.

Replace with a non-scratched, non-warped disc.

Eject the disc then reload it properly.

correct region code disc.

English

Owner’s Manual

NX404E

Page 55

English

24. SPECIFICATIONS

FM Tuner

Frequency Range: 87.5 MHz to 108.0 MHz

Owner’s Manual

Usable Sensitivity: 8 dBµV

Stereo Separation:

Frequency Response: 30 Hz to 14 kHz

25 dB (1 kHz)

AM Tuner

Frequency Range: 531 kHz to 1,602 kHz

Usable Sensitivity: 30 dBµV

DVD Player System

Digital Versatile Disc System with CDDA capable

Usable discs:

DVD video disc, Compact disc

Frequency Response: 20 Hz to 20 kHz

Signal/Noise Ratio: 93 dbA

Distortion: 0.05%

Video system: NTSC/PAL

Audio/Video Input

Audio input voltage: ≤ 2 V

Video input voltage: 1.0 V

Audio input sensitivity (at 2 V output)

High: 325 mV

Mid: 650 mV

Low: 1.3 V

rms

@75

p-p

A2DP (Advanced Audio Distribution Prole)

AVRCP1.2,1.3,1.4 (AV Remote Control Prole)

PBAP (Phone Book Access Prole)

SPP (Serial Port Prole)

Power Class: 2

USB

Specication: USB 1.1/2.0 (FS)

Playable Audio format:

MP3,WMA,AAC,FLAC

Playable Video format:

AVI,MP4,MPG/MPEG,3gp

General

Power source voltage:

14.4 VDC (10.8 to 15.6 V allowable)

Ground: Negative

Current consumption: 4.0 A @1 W

Auto Antenna Rated Current: 500 mA less

Audio Ampliﬁer

Maximum power output:

180W (45W x 4)

Speaker impedance 4

Output power:

4 x 25W DIN 45324,+B=14.4V

(4 to 8 allowable)

Audio/Video output

Video output voltage: 1.0 V

Screen Size: 6.2” wide type

Pixels: 1,152,000

Resolution: 800 x 480 x 3 (RGB)

p-p

@75

Bluetooth

Specication: Bluetooth Ver 2.1+EDR

Prole: HFP1.5(Hands Free Prole)

HSP1.0 (Headset Prole)

NX404E

Page 56

Note:

• Specications and design are subject to change without notice for further improvement.

English

165mm

NX404E dimensions:

NX404E weight: 2.3 kg

172mm

mm001mm871

Owner’s Manual

NX404E

Page 57

English

NX404E

CAMERA

VIDEO OUT

REAR RCH

REAR LCH

AUX2 VIDEO IN

AUX2 AUDIO IN LCH

MIC

Red

White

Yellow

CCA-750(sold separately)

4-Channel Amplifier

Red Red RedWhite White White

SWI

SUBWOOFER1

SUBWOOFER2

AUX2 AUDIO IN RCH

HDMI CABLE

For Rear zone

Front Right

Rear Right

Front Left

Rear Left

Gray

Black

Gray

Black

25. WIRE CONNECTION GUIDE

Note:

• Before installing, be sure to disconnect the negative cable of the car battery.

Owner’s Manual

• In the optional devices, the RCA cables and the Connector cables are separately-sold

items.

•

When connect the HDMI cable, be sure to x with the HDMI cable holder and Machine screw(M2 x

4).

Refer to page 57

HDMI cable holder

DTX502E or DAB404E

NX404E

Page 58

English

Owner’s Manual

Ye llow

Blac

Orange White/

Blue

Grass-green

Purple Whit/

Purple Bla/

Purple

Gray Bla/

15A

Red

Brown

White Bla/

Green

Green Blac/

Blue White/

Gray

White

BACKUP

AUTO ANT

PHONE INT

Parking brake safety

!!!!Warning!!!!

for complete operation

device must be connected

GND

ILLUMI

ACC

REMOTE

PARKING

REVERSE

RR-

RR+

FR-

FR+

FL+

FL-

RL+

RL-

Note:

*1: Connecting the PHONE INTERRUPT terminal The phone interrupt will mute the audio if the lead receives a negative or ground signal.

NX404E

Page 59

Clarion Co., Ltd.

Clarion NX404E User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual