Clarion DXZ956MC User Manual

Owner’s manual

 !" !"

 !"

 !" !"

사용사용

설명서설명서

사용

설명서

사용사용

설명서설명서

DXZ956MC

CD/MP3/WMA Receiver / CeNET & Touch Panel Control / Music Catcher

•

CD/MP3/WMA Music Catcher

CD/MP3/WMA

뮤직뮤직

캐처캐처

뮤직

캐처

뮤직뮤직

캐처캐처

 

 / CeNET

 

리시버리시버

리시버 / CeNET &

리시버리시버

 !" # !" #

 !" # /

 !" # !" #

•

터치패널터치패널

터치패널

터치패널터치패널

컨트롤컨트롤

컨트롤 /

컨트롤컨트롤

Thank you for purchasing this Clarion product.

English

∗ Please read this owner’s manual in its entirety before operating this unit. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the

CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations for operating them are described.

Contents

1. FEATURES..................................................................................................................................... 2

2. PRECAUTIONS ............................................................................................................................. 3

Sloping Console .............................................................................................................................. 4

Handling Compact Discs ................................................................................................................ 4

3. CONTROLS .................................................................................................................................... 5

4. NOMENCLATURE ......................................................................................................................... 6

Names of the Buttons and their Functions ..................................................................................... 6

Operations when External Equipment is Connected to this Unit ..................................................... 7

Touch Panel Buttons ....................................................................................................................... 8

To uch Panel Operations .................................................................................................................. 9

5. DCP .............................................................................................................................................. 10

6. REMOTE CONTROL ..................................................................................................................... 11

Inserting the Battery ....................................................................................................................... 11

Functions of Remote Control Unit Buttons ................................................................................... 12

7. OPERATIONS ............................................................................................................................... 13

Basic Operations .......................................................................................................................... 13

Radio Operations ........................................................................................................................... 17

CD/MP3/WMA Operations ............................................................................................................ 20

MUSIC CATCHER Operations ...................................................................................................... 25

Sound Adjustment ......................................................................................................................... 27

Common Operations ..................................................................................................................... 38

8. OPERATIONS OF ACCESSORIES ............................................................................................. 46

CD Changer Operations ............................................................................................................... 46

TV Operations .............................................................................................................................. 49

9. IN CASE OF DIFFICULTY ........................................................................................................... 52

10. ERROR DISPLAYS ....................................................................................................................... 54

11. SPECIFICATIONS ......................................................................................................................... 55

1. FEATURES

• 4.2-Inch Full Color TFT Display

• Optimedia Technology for Superior Graphics and Touch-Screen Control

• MP3 and WMA Playback With ID3-TAG and WMA-TAG Display Capability

• High-Powered Internal MOSFET Amplifier (53 Watts x 4 Channels)

• Music Catcher for One-Touch CD Recording (Up to 80 Songs)

• Shock-Proof Memory for Skip-Free CD Playback

• Superb Music Reproduction With 24-Bit D/A Conversion and 4-Volt/6-Channel RCA Outputs

• Auxiliary Input for External Device Connection

• AC Processor IV: Dolby Pro Logic II / Time Alignment / Virtual Space Enhancer / 3-Band Parametric EQ / ADF Compressed Audio Enhancer

• High Quality Stainless Steel Faceplate

2 DXZ956MC

2. PRECAUTIONS

English

1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about 1 hour. The condensation will disappear naturally allowing normal operation.

WARNING

For your safety, do not watch or operate the touch panel while driving.

CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER AND MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

2. Driving on extremely bumpy roads may cause severe vibration and cause the sound to skip.

3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

INFORMATION FOR USERS:.

CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.

DXZ956MC 3

Sloping Console

English

This unit uses a SLOPING CONSOLE to make large screen displays possible.

When you use the SLOPING CONSOLE, be sure to close it.

CAUTION

BE CAREFUL NOT TO GET YOUR FINGERS CAUGHT WHEN OPENING AND CLOSING THE SLOPING CONSOLE.

1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching OFF the ignition key.

If you switch OFF the ignition key with the SLOPING CONSOLE tilted, the SLOPING CONSOLE does not close.

Handling Compact Discs

2. Before the SLOPING CONSOLE closes, there may be a braking sound from the safety mechanism. This is normal.

3. If you move the SLOPING CONSOLE by hand, this may start play. To correct this play, with the power for the unit ON, press the [ button to close the SLOPING CONSOLE.

4. After a disc is ejected, the SLOPING CONSOLE automatically returns to the tilted or closed state. If there is any obstruction when the SLOPING CONSOLE tries to close, the safety mechanism is triggered and the SLOPING CONSOLE returns to the open state. If this happens, remove the obstruction, then press the [

5. To avoid scratching the compact disc, keep the 12 or 8 cm CD level when loading or removing it.

Q] button.

Use only compact discs bearing the or

mark.

Do not play heart-shaped, octagonal, or other specially shaped compact discs.

Some CDs recorded in the CD-R/CD-RW mode may not be usable.

Handling

• Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some CD-R and CD-RW discs may not be playable. Therefore, do not leave them for a long time in the car.

• New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a ball-point pen or the like to remove any roughness from the edge of the disc.

• Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.

• Never play a compact disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a compact disc, you may not be able to remove it from the CD player or it may damage the CD player.

Ball-point pen

Roughness

• Do not use compact discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage.

•To remove a compact disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

• Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may damage the disc or break the internal mechanism.

Storage

• Do not expose compact discs to direct sunlight or any heat source.

• Do not expose compact discs to excess humidity or dust.

• Do not expose compact discs to direct heat from heaters.

Cleaning

•To remove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference.

• Do not use any solvents, such as commercially available cleaners, anti-static spray, or thinner to clean compact discs.

• After using special compact disc cleaner, let the compact disc dry off well before playing it.

4 DXZ956MC

3. CONTROLS

Source unit

English

[

]

ADJ

IR-Receiver

[

ROTARY

]

Display

With the SLOPING CONSOLE opened

[Q] (OPEN/EJECT)

Photo Sensor

[MODE]

[ ] (SOUND)

[ISR][SRC]

[CD SLOT]

DCP Detaching Slider

DXZ956MC 5

English

4. NOMENCLATURE

Names of the Buttons and their Functions

IR-Receiver

• Receiver for remote control unit. (Operating range: 30° in all directions)

[ADJ] button

• Use this button to set or adjust the various settings in the adjust mode.

[Q] (OPEN/EJECT) button

• Open/closes the control panel. To eject a disc, open the control panel first, and then press this button once again.

Photo Sensor

• This sensor detects the brightness inside your car. When the auto-dimmer function is set to “AUTO”, the brightness of the display is dimmed according to the brightness detected by this sensor.

[MODE] button

• Use this button to play in scan, repeat, or random mode.

• Press and hold this button for 2 seconds or longer to switch between standard and simple operation displays.

[ ] (SOUND) button

• Use this button for setting or adjusting various settings such as ADF.

[ISR] (Instant Station Recall) button

• Immediately calls up a favorite radio station regardless of the current mode. (This is the ISR function.) You can store radio stations to the [ISR] button by holding this button down for 2 seconds or longer in the radio mode.

[SRC] button

• Switches among sound sources as shown below.

Radio ➜ CD/MP3 ➜ M. CATCHER ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

Note:

External equipment not connected with CeNET is not displayed.

[ROTARY] knob

• Press the knob to turn the power ON.

• Press the knob to turn the power OFF.

•Turn the knob to adjust the volume.

[CD SLOT]

• CD insertion slot.

DCP Detaching Slider

• Removes the DCP.

Display

• Displays the various information that indicates the operating state of this unit such as tuning/ play state and indicators.

•You can operate the display by touching or touching

the surface. (cf. page 9)

6 DXZ956MC

Operations when External Equipment is Connected to this Unit

English

● When the CD/DVD changer is connected

∗ For details, see the section “CD changer

operations” (cf. page 46). For the DVD

changer, refer to the Owner’s Manual provided with the DVD changer.

● When the TV is connected

∗ For details, see the section “TV

operations” (cf. page 49).

DXZ956MC 7

Touch Panel Buttons

English

● Standard operation display

Left slide button

98.10

SEEK

PRESET BAND DISPPS/AS

Sub buttons

Left slide button

•Touch this button for seek up/down or track up/

down operations.

•Touch and hold this button for fast-forward/fast-

rewind operations.

Right slide button

•Touch this button for preset channel up/down,

folder up/down, and disc up/down operations.

Sub buttons

• Shows functions available in a certain context.

FM1

2:45

Right slide button

P.CH

● Simple operation display

(To switch to the simple operation display, press and hold the [MODE] button for 2 seconds or longer.)

Left button Right button

FM1

SEEK

98.10

PRESET BAND DISPPS/AS

Sub buttons

Left button

•Touch this button for seek down or track down operations.

•Touch and hold this button for fast-rewind operation.

Right button

•Touch this button for seek up or track up operations.

•Touch and hold this button for fast-forward operation.

Sub buttons

• Shows functions available in a certain context.

2:45

P.CH

8 DXZ956MC

Touch Panel Operations

English

A touch panel display is used as the display on this unit. You can operate this display just by touching it with your fingertip. There are four main display operations as follows:

Touch

Touch the display with your fingertip and take it away within 1 second. This is the most basic operation when operating the display.

Touch and hold

Touch the display with your fingertip and hold it on the display for 1 or 2 seconds or longer. Do not move your finger while you are touching the display.

Touch

Touch the display with your fingertip, and move your finger to the up ( ) or down ( ) with your fingertip still touching the display, and take your fingertip away within 1 second. This operation is used, for example, selecting tracks or discs.

Touch

Touch the display with your fingertip, and move your finger to the up ( ) or down ( ) with your fingertip still touching the display, and keep your fingertip on the display. The current operation continues for the time your fingertip is held on the display. This operation is used, for example, for fast-forwarding/fast-rewinding tracks.

FM1

P.CH

2:45

DISP

98.10

MANU

DXZ956MC 9

English

5. DCP

The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.

We recommend taking the DCP with you when leaving the car.

Removing the DCP

1. Press the [Q] button to open the DCP.

2. Move the DCP detaching slider to the “RELEASE” side.

3. Push and slide the DCP upward to remove.

∗ The SLOPING CONSOLE without DCP

closes automatically in a few seconds.

CAUTION

Attaching the DCP

1. Place the DCP to the SLOPING CONSOLE, adjusting the metal connecters on DCP and the SLOPING CONSOLE.

2. Press the DCP until it clicks into the SLOPING CONSOLE.

* The DCP display lights and is ready to use.

CAUTION

• If the slider is on the [RELEASE] side and

the DCP is not locked into place, it may fall out from vibration of the car. This can break the DCP, so after removing it, either firmly reattach it on the unit or put it in its DCP case.

• The connector connecting the unit and the

DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

• Do not try to remove or attach while driving.

• The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.

• If you purchased a replacement DCP, an electrical adjustment is necessary. This adjustment requires technical knowledge. Please consult Clarion service or a Clarion service station.

10 DXZ956MC

6. REMOTE CONTROL

[

BND

]

[

]

[a], [d]

[

DISP

]

[

RDM

]

[

RPT

]

[

SRC

]

[

MUTE

]

[

ISR

]

[

SCN

]

[

], [ ]

English

Receiver for remote control unit

Remote control unit

Inserting the Battery

1. Turn over the remote control unit and slide the

cover in the direction indicated by the arrow in the illustration.

2. Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing upwards.

3. Press the battery in the direction indicated by the

arrow so that it slides into the compartment.

4. Replace the cover and slide in until it clicks into

place.

Notes:

Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials. Always follow these safety precautions:

• Use only the designated battery .

• When replacing the battery, inser t properly, with +/-

polarities oriented correctly.

• Do not subject battery to heat, or dispose of in fire or

water. Do not attempt to disassemble the battery.

• Dispose of used batteries properly.

Operating range : 30° in all directions

Signal transmitter

Insertion guide

DXZ956MC 11

Functions of the Remote Control Unit Buttons

English

Mode

Button

[SRC]

[BND]

[ ] , [ ]

[ ]

[MUTE]

[ISR]

[DISP]

[SCN]

Radio

Switches among radio, CD/MP3/WMA, MC, CD changer, DVD changer, TV and AUX.

Switches reception band.

Increases and decreases volume (in all modes).

Moves preset channels up and down.

No function.

Tu r ns mute on and off.

Recalls ISR radio station in memory. When pressed and held for 2 seconds or longer: Stores current station into ISR memory (radio mode only).

Switches between the title display and the spectrum analyzer display.

Preset scan. When pressed and held for 2 seconds or longer: Auto store.

CD/MP3/WMA/

M.CATCHER

Returns to the first track.

Moves tracks up and down. When pressed and held for 1 second or longer: Fast-forward/fast-rewind.

Switches between playback and pause.

Scan play. When pressed and held for 1 second or longer: Folder scan play (MP3/WMA disc, MC mode).

CD changer

DVD changer

Moves the next disc in increasing order.

Scan play. When pressed and held for 1 second or longer: Disc scan play.

Switches reception band.

Moves preset channels up and down.

No function.

Preset scan. When pressed and held for 2 seconds or longer: Auto store.

[RPT]

[RDM]

∗ Some of the corresponding buttons on the source unit and remote control unit have different functions.

No function.

Repeat play. When pressed and held for 1 second or longer: Folder repeat play (MP3/WMA disc, MC mode).

Random play. When pressed and held for 1 second or longer: Folder random play (MP3/WMA disc, MC mode).

Repeat play. When pressed and held for 1 second or longer: Disc repeat play.

Random play. When pressed and held for 1 second or longer: Disc random play.

No function.

Switches between TV and VTR.

12 DXZ956MC

7. OPERATIONS

Basic Operations

English

CAUTION

Be sure to lower the volume before switching the unit off or the ignition key. The unit remembers its last volume setting. If you switch the power OFF with the volume up, when you switch the power back ON, the sudden loud volume may hurt your hearing and damage the unit.

● 3WAY speaker system

High 2ch, Mid 2ch, and Sub-woofer 2ch

Tweeter (left)

Front speaker (left)

Sub-woofer

Tweeter (right)

Front speaker (right)

Speaker system

Speaker System

3 WAY High 2ch Mid 2ch

2 WAY High 2ch Mid 2ch Rear 2ch

Dolby PL II 5.1ch NORMAL Front 2ch Rear 2ch

To make the best use of Dolby Pro Logic II on this product, we recommend to install a 5.1 channel speaker system.

Even if it is unavailable, a 4 channel speaker and sub-woofer system is also designed to reproduce a sound field close to that of the 5.1 system.

● 2WAY speaker system

High 2ch, Mid 2ch, and Rear 2ch

Tweeter (left)

Front speaker (left)

Rear speaker (left)

Speaker Configuration

Front 2ch

Surround 2ch

Subwoofer 2ch

Center + Subwoofer Subwoofer 2ch

Tweeter (right)

Front speaker (right)

Rear speaker (right)

● Dolby PL II (5.1ch) speaker system

Front 2ch, Surround 2ch, Center, and Sub-woofer

Front speaker (left)

Surround speaker (left)

Sub-woofer

Center speaker

Front speaker (right)

Surround speaker (right)

● NORMAL speaker system Front 2ch, Rear 2ch, and Sub-woofer 2ch

Front speaker (left)

Rear speaker (left)

Sub-woofer

Front speaker (right)

Rear speaker (right)

DXZ956MC 13

Basic Operations

English

Selecting a speaker system

When this product is turned on for the first time, it allows you to select a speaker system. Choose your system in “SPEAKER SELECT” screen by following the procedure below.

1. Touch the speaker system best suited to

your car.

SPEAKER SELECT

3 WAY ?

CANCEL

Dolby PL

NORMAL

3 WAY 2 WAY

2. Touch [OK] to confirm your selection.

∗ The screen displays a clock with power off.

SYSTEM CHECK function

If you change your speaker system while the power of this unit is on, perform the SYSTEM CHECK function to display the SPEAKER SELECT screen and select the appropriate speaker system again. For details, see page 44.

CAUTION

Select the speaker system suited to your speaker configuration. Failing to do so can damage your speakers.

Turning ON/OFF the power

Turning off

1. Press the [ROTARY] knob.

∗ The clock will stay displayed after the

power is turned OFF.

■ To turn off the clock display

Touch the clock to turn off the clock display while the power is off.

CODEMATIC function

When “CODEMATIC” is set to “ON”, and the power is turned ON with the DCP attached, the Touch Code display appears. Touch the display in the order that was set in the adjust mode.

ADJ SETTING

CODEMATIC OFF

RTN

For details on the CODEMATIC function, see “Using the security function” (cf. page 45).

Selecting a mode

1. Press the [SRC] button to change the operation mode.

2. Each time you press the [SRC] button, the operation mode changes in the following order:

Radio ➜ CD/MP3 ➜ M. CATCHER ➜ (CD changer) ➜ (DVD changer) ➜ (TV) ➜ AUX ➜ Radio...

∗ External equipment not connected with

CeNET is not displayed.

Turning on

Note:

• Be careful when using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1. Press the [ROTARY] knob.

The mode that was previously active is displayed.

14 DXZ956MC

Adjusting the volume

1. Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. ∗ The volume level is from 0 (minimum) to

33 (maximum).

Switching the operation display mode

There are 2 basic operation displays: standard operation display and simple operation display.

1. Press and hold the [MODE] button for 2 seconds or longer to switch the operation display.

FM1

SEEK

98.10

PRESET BAND DISPPS/AS

2:45

P.CH

In the simple operation display, the operations of touching in the radio or CD mode display screen are not required.

Descriptions given in this manual are mainly for the standard operation display. For descriptions for operations in the simple operation display, refer to the descriptions for the screen displays in the radio mode or the CD mode.

Switching the background

1. Touch [DISP].

98.10

SEEK

PRESET BAND DISPPS/AS

∗ DISPLAY EDIT screen displays.

2. Touch on the left of the display to choose the background.

DISPLAY EDIT

BGV

SP/ANA

∗ The background includes 12 wallpaper

images and 2 motion pictures.

∗ Choose [SCAN] to automatically display all

the wallpaper.

● Background

M01: WRC M02: Landscape P01: Car and Checker Flag P02: 307WRC from Two View Points P03: Rally Driver P04: Driving Scene P05: Cube P06: Bubble

FM1

2:45

RTN

P.CH

Basic Operations

P07: Speaker P08: Digital Image1 (Disc media) P09: Digital Image2 (Broadcast media such

as satellite)

P10: Mixer P11: Record Player P12: Meter

3. Touch [RTN].

■ To change wallpaper color

You can change the colors of the wallpaper (from P05 to P12).

• It can be set to both “DAY” mode and “NIGHT” mode.

1. Touch [DISP].

2. Touch [COLOR].

DISPLAY EDIT

BGV

D-BLUE

SP/ANA COLOR

AUTO

SCROLLPRTN

∗ The [COLOR] is displayed only when you

choose wallpaper from P05 to P12.

3. Touch on the left of the display to

select [DAY] or [NIGHT].

COLOR SELECT

NIGHT DARK BLUE

RTN

4. Touch on the right of the display to

select the color to set.

● COLOR

• DARK BLUE

•IVORY

• WINE RED

• LIGHT BLUE

• GREEN

TITLE

English

DXZ956MC 15

Basic Operations

English

Adjusting the spectrum analyzer

1. Touch [DISP].

TRACK

01:01

Don tStop

2:45

DISPTOPREC

∗ Display edit mode appears.

2. Touch [SP/ANA].

DISPLAY EDIT

BGV

D-BLUE

SP/ANA COLOR

INPUTPRTN

∗ The display shows the spectrum analyzer

mode.

3. Touch on the right of the display to select the spectrum analyzer to set.

DISPLAY EDIT

BGV

D-BLUE

MID

RTNTITLE COLOR SENS

•You can choose from four types.

• When [SCAN] is selected, each of them is

displayed for about 10 seconds.

4. Touch [SENS] to select the sensitivity.

BGV

DISPLAY EDIT

D-BLUE

LOW

RTNTITLE COLOR SENS

•You can choose from [HIGH], [MID], or [LOW].

5. Touch [RTN].

Switching the title display

You can display stored information such as disc titles or track titles when playing back music in CD, CD changer, or MUSIC CATCHER mode.

1. Touch [DISP] while a title is shown.

TRACK

02:53

REC TOP

∗ Display edit mode appears.

2:45

DISP

TITLE

SPE/ANA

2. Touch [TITLE].

DISPLAY EDIT

BGV

D-BLUE

LOW

RTNTITLE COLOR SENS

SPE/ANA

∗ Title edit mode appears.

3. Touch on the right of the display to choose the kind of title to show.

DISPLAY EDIT

BGV

TRACK

D-BLUE

SP/ANA COLOR

AUTO

SCROLL

RTN

TITLE

∗ The title you have chosen is displayed. If it

is too long to fit into the display, it automatically scrolls.

4. Touch [SCROLL].

• Select [AUTO] to scroll the title repeatedly.

• Select [ONCE] to scroll the title only once.

Notes:

•You cannot set the scroll options in User title and

MUSIC CATCHER mode.

5. Touch [RTN].

●CD mode (MP3/WMA)

Folder title (when using a folder) ➜ Play list (when using a play list) ➜ Track title ➜ Album TAG ➜ Artist TAG ➜ Title TAG ➜ Folder title (when using a folder)...

●MUSIC CATHCHER mode

Folder title ➜ Track title ➜ Folder title...

Notes:

• MP3 supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

•Tag displays give priority to V2.3 / 2.2.

• In the case of album Tags for WMA, the

information written into the extension header is displayed.

• Only ASCII characters can be displayed in Tags.

16 DXZ956MC

Radio Operations

Screen displays in the radio mode

● Standard operation display

The standard operation display appears by pressing the [SRC] button and selecting the radio mode.

Preset No.

FM1

2:45

PS/AS

display

P.CH

DISP

Frequency display

98.10

SEEK

PRESET BAND DISPPS/AS

PRESET

SEEK/MANU display

Title display

Reception band display

BAND

English

BAND

Touching this switches the reception band. Touching and holding this for 1 second or longer switches between the manual tuning mode and the seek tuning mode.

PS/AS

Touching this starts a preset scan. Touching and holding this for 2 seconds or longer starts an auto store. Touching this during the preset scan/auto scan ends the operation.

DISP

The display contents can be changed.

a/d (only in the simple operation display)

Touching these enables seek tuning or step tuning (in the manual tuning mode). Touching and holding these enables quick tuning (in the manual tuning mode).

● Simple operation display

Pressing and holding the [MODE] button for 2 seconds or longer switches the simple operation display.

a/d

FM1

SEEK

98.10

PRESET BAND DISPPS/AS

2:45

P.C H

Frequency display

The frequency currently being received is displayed. Touching

on the left slide button in the standard operation display allows you to perform seek tuning or manual tuning.

Preset No. display

Touching

on the right slide button in the standard operation display selects a preset memory.

Title display

Displays the name of the broadcast channel currently being received.

Reception band display

AM: AM band name FM1: FM band name

PRESET

Touching this displays a preset memory No. list.

Listening to the radio

1. Press the [SRC] button to select the radio mode. Each press of the [SRC] button switches the mode as follows:

Radio ➜ CD/MP3 ➜ M.CATCHER ➜ (CD Changer) ➜ (DVD Changer) ➜ (TV) ➜ AUX ➜ Radio...

∗ The mode of equipment that is not

connected is not displayed.

2. Touch [BAND] to switch the reception band. Each touch of [BAND] switches the reception band as follows:

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

Tuning

There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.

DXZ956MC 17

+ 39 hidden pages