
Thank
•
•
•
you
Please
After
reading
Check
for
read
the
contents
purchasing
this
owner's
this
manual,
of
Contents
1.
FEATURES
2.
PRECAUTIONS
3.
SPECIFICATIONS
Package
4.
TROUBLESHOOTING
5.
INSTALLATION
Before
Precautions
Installing
6.
WIRING
................................................................................................................
.........................................................................................................
...................................................................................................... 3
Contents
...................................................................................................... 4
.......................................................................................................... 5
installation
when
the
...................................................................................................... 5
using
camera
...........................................
1. FEATURES
this
manual
be
the
enclosed
Clarion
sure
product.
in
its
to
keep
warranty
entirety
it
in
before
a
handy
card
operating
and
keep
place
this
(e.g.,
it
carefully
equipment.
glove
compartment).
with
this
manual.
2
2
...............................................................................................
double
sided
tape
for
installation
......................................... 5
4
.................................................................................................. 6
..
.........................................................................
?
•
Wide
160
•
Hydrophobic
•
Built-in
•
Exceeds
•
Defeatable
•
Selectable
Distance
Distance
degrees
microphone
ASTM
4-color
Reverse
A
guidelines
may
vary
viewing
coated
04329
distance
lens
for
I
angle
for
additional
UV
exposure
True
image
improved
guidelines
WARNING
(red,
orange,
depending
2. PRECAUTIONS
INFORMATION FOR
CHANGES
MANUFACTURER
OR
MODIFICATIONS
WILL
USERS:
VOID
THE
safety
and
yellow,
on
vehicle
TO
THIS
WARRANTY.
visibility
IP67
green)
and
installation.
PRODUCT
ratings
on
camera
NOT
APPROVED
are
approximate
BY
only.
THE
This
equipment
comply
pursuant
are
against
installation.
and
not
instructions,
2
CC720
with
to
designed
harmful
can
radiate
installed
has
the
limits
Part
15
to
provide
interference
This
equipment
radio
and
used
may
cause
been
tested
for
a
of
the
FCC
reasonable
frequency
in
accordance
harmful
and
Class
B
digital
Rules.
in
a
residential
generates,
energy
interference
found
to
device,
These
protection
uses,
and,
with
the
limits
if
to
radio
communication.
guarantee
in
a
does
television
by
turning
is
encouraged
experienced
that
particular
cause
reception,
the
interference
installation.
harmful
equipment
to
consult
radio!TV
However,
will
If
this
interference
which
can
off
and
the
dealer
technician
there
is
not
occur
equipment
to
radio
be
determined
on,
the
or
an
for
help.
no
or
user

A
WARNING
•
This device has been designed
exclusively for use with a vehicular
mounted vision
should not be used for other purposes.
•
Disconnect the vehicle's negative(-)
terminal when
•
Do
not attempt
modify this product.
• In the event
holes in the vehicle
confirm that the
wiring
piping, gas tank, electrical wiring
other functional parts
•
Do
image when reversing the vehicle.
The
meant
obstacles
limited
will not strike
not rely
rear-view
for
confirming
to
in
its
conjunction
•
Always reverse at
The
rear-view
wide
angle
actual
they
•
Do
or other parts are malfunctioning.
• When
completed, confirm that the vehicle's
horn, brake and warning lights, and
distances
subjectively
not use when the imaging surface
installation
assist camera system.
installing wiring.
to
disassemble or
it
is necessary
for
drill
bit
or
solely on the monitor
monitor
is
an
the
the
rear
of
the
range.
with
image,
It
should
direct
low
monitor
with
may
visual
produces
the
be
appear
and wiring are
to
mounting,
or camera
interfere with
of
the vehicle.
auxiliary
presence
vehicle,
be
used
observations.
speeds.
result
different
in
the
monitor.
drill
of
and
a
that
than
It
or
device
is
only
in
ACAUTI
other electrical equipment function
properly as designed.
• Install only as directed in the
Installation Manual.
• Install
• When drilling
for
insulated grommets in the holes to
protect the wiring.
• If
the camera, or when
use silicon sealant to
•
Do
wiring.
•
After completing the camera wiring,
use cable clamps or insulation tape to
bundle the wiring together.
•
The images produced from the rear-view
monitor are inverted right-left in the same
way as images
rearview mirrors. The image may differ
depending on the vehicle type.
•
Do
devices around the camera.
The
instrument
to
• Periodically
the
necessary.
accessory parts as directed.
holes in the vehicle
installation
holes are
not damage
not use high-pressure car washing
camera
high-pressure
installation
of
drilled
or
seen
is
a
high-precision
and
should
water
check the tightness
screws and retighten
.
ON
wiring, always use
in the vehicle to install
installing wiring,
seal
scar the camera
in the vehicle's
not
stream
.
any gaps.
be
subjected
impacts.
of
if
3.
SPECIFICATIONS
Power
Power
Image
Angle
Minimum
Active
Ingress
SN
Operating
Audio
Dimensions:
Note:
source/voltage:
consumption:
sensor:
of
view:
subject
pixels:
Protection:
ratio:
Temperature
Input
Specifications and design are subject to change without notice for further improvement.
(MIC)
illumination:
:
Sensitivity:
Signal
to
Noise
Ratio:
DC
12.0V
<100mA
1/4
inch
160±3
0.1
348,160
IP67
46
40°
-38dB
>58
24.31
lux
dB
c-
dB
degrees
(AGO
±2dB
(W)
(9
Color
(at
50
(680
+85°
x
-16V)
CMOS
(horizontal),
IRE)
horizontal
ON)
or
c
(Od8=1
30.81
(H)
sensor
better
V/Pa)
x
23.11
x
120+3
512
degrees
vertical)
(D)
mm
(vertical)
CC720
3