Citronic CXB User Manual

CXB

Dual Coil Subwoofers

Item ref: 178.278UK, 178.279UK

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

178.278UK, 178.279UK User Manual

Introduction

Thank you for choosing a CXB dual coil subwoofer as part of your sound system. This product can be used
for installation, small to medium PA applications or powered in stereo as part of a 2.1 system. Please read
this manual prior to use to avoid damage through misuse.

Important Note: This product is fitted with a DUAL COIL / PARALLEL switch.

In DUAL COIL mode, each input has a nominal impedance of 8Ω

For each of the SPK input sockets, there is a parallel set of binding post connectors for connecting an
output to a satellite speaker. This enables the CXB10 to be wired in-line with 2 satellite speakers to form a
full range 2.1 speaker set in DUAL COIL mode.

In PARALLEL mode, connecting to the L input gives a combined impedance of 4Ω

Moving the slide switch to the PARALLEL setting connects both coils of the CXB10 sub driver together.
Connecting an amplifier to the L channel input powers the CXB10 as a standard 4Ω 250W subwoofer.