Cisco Systems 5555-X, 5545-X, 5512-X, ASA5500XSSD120, M170 User Manual
...
SLIDE RAIL INSTALLATION INSTRUCTIONS
For Cisco C170, M170, and S170
Appliances
and
Cisco 5512-X, 5515-X, 5525-X, 5545-X,
5555-X Adaptive Security Appliances
and
Cisco IPS 4345 and 4360
1 Verify the Box Contents
2 Disassemble the Slide Rail
3 Attach Inner Rails to the Chassis
4 Veri fy the Ra ck Typ e
5 Round Hole Racks
6 Threaded Hole Racks
7 Attach the Outer Slide Rail to Round and Square
Hole Racks
8 Attach the Outer Slide Rail to Threaded Hole Racks
9 Install the Chassis
10 Secure the Chassis
Obtaining Documentation and Submitting a
Service Request
1 Verify the Box Contents
A
B
C
D
E
F
300885
A
B C D E F
Remove the contents from the box and verify that it contains the
following items for all rack types:
• Slide Rails (x2) (preconfigured for square hole racks)
• Phillips flat-head screws for Inner Slide (x2)
For round hole racks, you also need the following:
• Round Hole Inserts (x4)
For threaded hole racks, you also need the following:
• Threaded Hole Brackets (x2)
• Threaded Hole Standoffs (x2)
• Phillips pan-head screws for threaded hole racks (x8)
Tools Required:
• Phillips screwdriver
• Flat-head screwdriver (for threaded hole racks)
2
2 Disassemble the Slide Rail
Front
Pull the inner slide rail from the outer slide rail.
Slide the plastic tab forward, and pull the inner slide rail to
disconnect it from the outer slide rail.
Repeat the steps on this page for the other slide rail.
3
3 Attach Inner Rails to the Chassis
330907
B
330905
Align one of the inner slide rail key holes over the chassis
shoulder screw on one side. Slide the inner slide rail forward so
that the shoulder screw is securely in place.
Use a Phillips screwdriver to secure the inner slide rail with one
Phillips flat-head screw .
Secure the other inner slide rail to the chassis by repeating the
previous steps on this page.
4
Loading...