Cisco ISB7000 Series Installation Manual

Installation Manual

Cisco ISB7000 Series
High-De nition
IP Set-Tops

Energy Star V3

2

Contents

Notice for Installers ..........................................................................................................4

IMPORTANT SAFETY INSTRUCTIONS..............................................................................4

Change the Way You Watch TV .......................................................................................6

Identify Your Set-Top .......................................................................................................6

Safety First .......................................................................................................................7

Serial Number ..................................................................................................................7

In This Manual ..................................................................................................................7

Open Source GNU GPL Statement ..................................................................................7

Front Panel .......................................................................................................................8

Back Panel .......................................................................................................................9

Connecting the Set-Top .................................................................................................10

ISB7005 Wireless Network Connection .........................................................................11

Connection for ISB7005 Wireless Set-Top ....................................................................12

Connecting the Wireless Access Point to the Wireless Gateway ...................................13

Pairing the Wireless Access Point and Set-Top .............................................................13

Connecting to the In-Home Network .............................................................................14

Connections for a High-De nition TV (HDTV) ................................................................15

Connections for a Standard-De nition TV (SDTV) .........................................................16

Connections for a VCR or DVD Recorder .......................................................................17

Connecting to an HDTV with an HDMI Connector ..........................................................18

Connecting to an HDTV with a DVI Connector ...............................................................19

Connecting to an HDTV with Component (YPbPr) Connectors ......................................20

Connecting to an SDTV with Component (YPbPr) Connectors ......................................21

Connecting to an SDTV with an S-Video Connector ......................................................22

Connecting to an SDTV with an RCA-Type Connector ..................................................23

Connecting to an SDTV with a Coaxial Cable.................................................................24

Connecting to a Home Theater System with Component (YPbPr) Connectors .............25

Connecting to a Stereo VCR or DVD Recorder (optional) ..............................................26

Troubleshooting .............................................................................................................27

Avoid Screen Burn-In .....................................................................................................28

Frequently Asked Questions ..........................................................................................29

Picture Formats ..............................................................................................................30

Index ..............................................................................................................................31

Compliance Information .................................................................................................33

3

Notice for Installers

The servicing instructions in this notice are for use by quali ed service personnel only. To reduce the risk of electric shock, do not perform
any servicing other than that contained in the operating instructions, unless you are quali ed to do so.

Note to System Installer

For this apparatus, the cable shield/screen shall be grounded as close as practical to the
point of entry of the cable into the building. For products sold in the US and Canada, this
reminder is provided to call the system installer's attention to Article 800-93 and Article
800-100 of the NEC (or Canadian Electrical Code Part 1), which provides guidelines for
proper grounding of the cable shield.

This symbol is intended to alert you that uninsulated voltage within
this product may have sufficient magnitude to cause electric
shock.Therefore, it is dangerous to make any kind of contact with any
inside part of this product.

Ce symbole a pour but d’alerter toute personne qu’un contact avec
une pièce interne de ce produit, sous tension et non isolée, pourrait
être suffisant pour provoquer un choc électrique. Il est donc
dangereux d’être en contact avec toute pièce interne de ce produit.

This symbol is intended to alert you of the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying this product.

Ce symbole a pour but de vous avertir qu’une documentation
importante sur le fonctionnement et l’entretien accompagne ce
produit.

CAUTION: To reduce the risk of electric shock, do not remove cover (or
back). No user-serviceable parts inside. Refer servicing to qualified service
personnel.

T

O PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT

TO RAIN OR MOISTURE.

WARNING

20080814_Installer800

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampli ers)
that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

11) Only use attachments/accessories specified by the
manufacturer.

12)

13) Unplug this apparatus during lightning storms or when unused

14) Refer all servicing to quali ed service personnel. Servicing

Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from
tip-over.

for long periods of time.

is required when the apparatus has been damaged in any
way, such as a power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

Power Source Warning

A label on this product indicates the correct power source for this
product. Operate this product only from an electrical outlet with
the voltage and frequency indicated on the product label. If you are
uncertain of the type of power supply to your home or business,
consult your service provider or your local power company.

The AC inlet on the unit must remain accessible and operable at
all times.

Ground the Product

WARNING: Avoid electric shock and  re hazard! If this

product connects to cable wiring, be sure the cable system
is grounded (earthed). Grounding provides some protection
against voltage surges and built-up static charges.

Protect the Product from Lightning

In addition to disconnecting the AC power from the wall outlet,
disconnect the signal inputs.

Verify the Power Source from the
On/O Power Light

When the on/o power light is not illuminated, the apparatus may
still be connected to the power source. The light may go out when
the apparatus is turned o , regardless of whether it is still plugged
into an AC power source.

Eliminate AC Power/Mains Overloads

WARNING: Avoid electric shock and  re hazard! Do

not overload AC power/mains, outlets, extension cords, or
integral convenience receptacles. For products that require
battery power or other power sources to operate them,
refer to the operating instructions for those products.

4

IMPORTANT SAFETY INSTRUCTIONS, continued

Handling Disposable Batteries

This product may contain disposable batteries. Heed the following
warning and follow the Battery Safety and Battery Disposal
instructions below.

WARNING: There is danger of explosion if the battery
is mishandled or incorrectly replaced. Replace only with
the same type of battery. Do not disassemble it or attempt
to recharge it outside the system. Do not crush, puncture,
dispose of in  re, short the external contacts, or expose to
water or other liquids. Dispose of the battery in accordance
with local regulations and instructions from your service
provider.

Battery Safety

• Insert batteries correctly. There may be a risk of explosion if
the batteries are incorrectly inserted.

• Do not attempt to recharge ‘disposable’ or ‘non-reusable’
batteries.

• Please follow instructions provided for charging
‘rechargeable’ batteries.

• Replace batteries with the same or equivalent type that we
recommend.

• Do not expose batteries to excessive heat (such as sunlight
or  re).

• Do not expose batteries to temperatures above 100°C
(212°F).

Battery Disposal

• The batteries may contain substances that could be harmful
to the environment.

• Recycle or dispose of batteries in accordance with the battery
manufacturer’s instructions and local/national disposal and
recycling regulations.

• The batteries may contain perchlorate, a known hazardous
substance, so special handling and disposal of this product
might be necessary. For more information about perchlorate
and best management practices for perchlorate-containing
substance, see www.dtsc.ca.gov/hazardouswaste/

perchlorate

Provide Ventilation and
Select a Location

• Remove all packaging material before applying power to the

product.

• Do not place this apparatus on a bed, sofa, rug, or similar
surface.

• Do not place this apparatus on an unstable surface.

• Do not install this apparatus in an enclosure, such as a

bookcase or rack, unless the installation provides proper
ventilation.

• Do not place entertainment devices (such as VCRs or DVDs),
lamps, books, vases with liquids, or other objects on top of
this product.

• Do not block ventilation openings.

Protect from Exposure to Moisture
and Foreign Objects

WARNING: Avoid electric shock and  re hazard! Do

not expose this product to dripping or splashing liquids,
rain, or moisture. Objects  lled with liquids, such as vases,
should not be placed on this apparatus.

WARNING: Avoid electric shock and fire hazard!
Unplug this product before cleaning. Do not use a liquid
cleaner or an aerosol cleaner. Do not use a magnetic/static
cleaning device (dust remover) to clean this product.

WARNING: Avoid electric shock and  re hazard! Never
push objects through the openings in this product. Foreign
objects can cause electrical shorts that can result in electric
shock or  re.

Service Warnings

WARNING: Avoid electric shock! Do not open

the cover of this product. Opening or removing the cover
may expose you to dangerous voltages. If you open the
cover, your warranty will be void. This product contains
no user-serviceable parts.

Check Product Safety

Upon completion of any service or repairs to this product, the service
technician must perform safety checks to determine that this product
is in proper operating condition.

Protect the Product When Moving It

Always disconnect the power source when moving the apparatus
or connecting or disconnecting cables.

20110316_IP_NoTuner_Safety

Operating Environment

The set-top is designed for operation indoors with a temperature
range from 32° to 104° F (0° to 40°C). Each set-top should have
adequate spacing on all sides so that the cooling air vents on the
chassis are not blocked.

5

Change the Way You Watch TV

Welcome to Internet Protocol Television (IPTV). The Cisco® ISB7000 Series High-De nition IP Set-Tops
bring a rich, new set of interactive services directly to you through your TV and your in-home IP network.
The set-top uses the existing in-home coaxial cable wiring and connects to most entertainment devices.

Available services may include some or all of the following features:

• Digital Video Recorder (DVR) – Allows you to record your favorite programs so that you can still
go to your friend’s house for dinner and not miss your favorite TV show

• Pause Live TV – Allows you to pay for the pizza and come back to the show where you left it.
(Applies to DVR models only)

• High-De nition (HD) – Provides crystal-clear pictures and sound when compared to standard­de nition – you won’t want to watch television any other way once you’ve experienced HD

• Video-On-Demand (VOD) – Gives you access to a robust library of movies and programs that
you can watch – when you want to watch them

Note: Contact your service provider to  nd out if the DVR, HD, or VOD services are available and to
activate the services.

Identify Your Set-Top

Your installation manual covers the following models of set-tops. Use the following information to
identify your model.

• ISB7000 set-top – TV set-top that supports high-de nition (HD) and standard-de nition (SD)
video decoding. Supports 480i, 720p, and 1080i content. Uses Ethernet over CAT-5 or HPNAv3
in-home networking over coaxial or twisted-pair

• ISB7005 set-top – The ISB7005 is the same as the ISB7000 but with a wireless feature and no
RF to wall connector

• ISB7030 set-top – The ISB7030 is the same as the ISB7000 but with a 320 GB hard disk drive

• ISB7031 set-top – The ISB7031 is the same as the ISB7030 but without HPNA and without RF
to TV connector

• ISB7050 set-top – The ISB7050 is the same as the ISB7000 but with a 500 GB hard disk drive

• ISB7080 set-top – The ISB7080 is the same as the ISB7000 but with a 1 TB hard disk drive

• ISB7100 set-top – The ISB7100 is the same as the ISB7000 but without optional connectors

• ISB7150 set-top – The ISB7150 is the same as the ISB7050 but without optional connectors

ISB7000 / ISB7100

PO WER LINK HD RECORD MENU

ISB

7000

OK

OK

OK

ISB7005

PO WER LINK HD RECORD MENU

ISB

7005

OK

OK

OK

ISB7030 / ISB7031 / ISB7050 / ISB7080 / ISB7150

OK

OK

OK

ISB

7031

6

T15239

Safety First

Before using the set-top, read the Important Safety Instructions section of this manual.

Serial Number

At times your service provider may ask for the serial number. To  nd the serial number for your set­top, look on the bottom of the set-top for the label. The serial number is a 9-digit numeric code to
the right of the letters “S/N” on the label.

Use the space provided here to record the serial number: _______________________________

In This Manual

This manual covers the information you need to connect your set-top to both your in-home IP
network and your entertainment system. The manual also outlines certain safeguards and installation
information. The safety information contained in this manual was developed and provided solely by
the set-top manufacturer, Cisco Systems, Inc.

Open Source GNU GPL Statement

Cisco ISB7000 set-tops contain(s), in part, certain free/open source software (“Free Software”) under
licenses which generally make the source code available for free copy, modi cation, and redistribution.
Examples of such licenses include all the licenses sponsored by the Free Software Foundation (e.g. GNU
General Public License (GPL), GNU Lesser General Public License (LGPL), Berkeley Software Distribution
(BSD), the MIT licenses and di erent versions of the Mozilla and Apache licenses). To  nd additional
information regarding the Free Software, including a copy of the applicable license and related
information, please go to: (i) for North America http://www.cisco.com/web/consumer/support/

open_source.html, or (ii) for outside North America http://www.cisco.com/web/consumer/support/
open_source.html#~international. Once at the site, search for the product listing and click on the

related items identi ed. If you have any questions or problems accessing any of the links, please contact:
[e-mail].

7

Front Panel

OK

OK

OK

ISB7030

T14255

3 4 5 76 108921

1 Power Turns the set-top on or places it in standby. To restart the set-top,
press and hold the POWER button for 10 seconds. The LED is green

2 Model Number Identi es the model number of your set-top as ISB7000, ISB7005,
ISB7030, ISB7031, ISB7050, ISB7080, ISB7100, or ISB7150

3 Link Indicates network link status. The LED is green
4 HD Indicates the set-top is set to a resolution of 720p or 1080i. The LED is

blue

5 Record Indicates that a recording is in progress. The LED is red
6 IR Sensor Receives the infrared signal from the remote control. The sensor is

behind the front panel

7 Menu Accesses the on-screen menu
8 Arrow Keys Accesses on-screen services (such as the on-screen guide, video-on-

demand, or pay-per-view) and navigates menus

9 OK Selects the current item
10 USB Port USB connector (optional)
Note: This illustration may vary from the actual product.

CAUTION:
Your set-top may be equipped with a hard disk drive to store programs that

you record and to allow you to rewind and pause live TV. Any time the set­top is powered on (power LED is illuminated) or a recording is in progress
(the record LED is illuminated), the hard disk drive is in use.

If you need to move the set-top, complete the following steps to allow the
hard disk drive to shut down properly. First, make sure that no recording is
in progress (record LED is o ). Then, turn o power by pressing the Power
key. Finally, unplug the unit and wait 10 seconds for the hard disk drive to
spin down (stop). At this point, the unit can be moved safely.

You should handle this product with the same level of care you would use
when handling other electronics containing a hard disk drive, such as a
laptop computer or other hard disk drive-equipped devices.

8

Back Panel

TO WALL

(VIDEO IN)

Pb Y

TO TV

(VIDEO OUT)

NETWORK eSATA OPTICAL POWERUSBS-VIDEO

Pr

21 3 4 6 9 1110125 87

VIDEO

OUT

LR

AUDIO

OUT

T14256

1 To Wall (Video In) Connect the set-top to in-house coaxial wiring, if applicable. (optional)
2 To TV (Video Out) Connect to TV. You must set the channel on your TV to the channel

designated by your service provider (usually channel 3). Contact your
service provider for the channel information (optional)

3 Network Connect to the Ethernet (CAT-5) network at your home, if applicable
4 eSATA Port Connect external SATA equipment approved by your service provider

to this port (optional)
5 YPbPr Connect the set-top to the component video input (YPbPr) on your

HDTV or SDTV. See pages 15 and 16 for more information
6 S-Video Connect an S-Video cable to send an S-Video signal to your TV, VCR, or

DVD recorder. This signal is standard-de nition but higher quality than
other standard-de nition TV connections. See page 17 for more
information (optional)

7 Video Out Connect to composite input on your HDTV or SDTV
Note: Two video output connectors are provided. Typically, one output

is connected to the TV, and the other output is used to connect to a
home theater system, DVD recorder, or VCR

8 Audio Out (L/R) Connect RCA-type cables to Audio Out to send analog audio signals
(left and right) to a TV with stereo inputs or to a stereo ampli er.
Note: Two sets of audio out connectors are provided. Typically, one set
of outputs is connected to the TV, and the other set is used to connect
to a home theater system, DVD recorder, VCR, or wireless headphones

9 Optical Connect an optical cable to send a digital audio signal to a surround-
sound system or other digital audio device

10 HDMI Connect an HDTV HDMI

™

(High-De nition Multimedia Interface) cable
from the HDTV to the HDMI port. HDMI supports both digital audio and
video. See page 15 for more information

11 USB Port Connects to external USB equipment approved by your service
provider (optional)

12 Power Connect the DC output of the AC power adapter (provided) to deliver
power to the set-top. Use only the AC power adapter provided with
the set-top

Note: This illustration may vary from the actual product.

9

Connecting the Set-Top

To connect your set-top to your network and home entertainment devices, complete these steps.

Because the connections

1

2

3

for a high-de nition (HD)
or standard-de nition (SD)
TV are di erent, you must
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the bene ts
of HDTV. Refer to the manual that came with your TV for more information.
See page 30 for more information on picture formats.

Make one of the following connections for your home network:

• If your home network uses coaxial cable, use the TO WALL connector on the
set-top. See page 14.

• If your home network uses twisted pair cable (phoneline wiring), use the TO
WALL connector on the set-top and an adapter that converts twisted pair to
coaxial. See page 14.

• If your home network uses Ethernet (CAT-5) cable, use the NETWORK
connector on the set-top. See page 14.

Make the connections for your TV, VCR, and DVD recorder as follows:

• If you are using an HDTV, see page 15 and the connection diagrams in this

manual.

• If you are using a standard-de nition TV, see page 16 and the connection

diagrams in this manual.

• If you want to record some programs on VCR tape or DVD, see page 17

and the connection diagrams in this manual.

9

16

4

3

or



4

5

10

Identify the additional consumer
electronic devices you will
connect to the set-top and TV.
See pages 18 through 26 and
refer to the owner’s manual for
the device.

Plug the set-top and the TV into an AC power source that is not controlled by a
switch.

Home Theater

OtherDVDVCR

ISB7005 Wireless Network
Connection

The ISB7005 set-top allows for easy and secure setup of
a wireless home network. The signal strength indicator on
the front panel of the set-top indicates the strength of
the wireless connection.

The set-top must be paired with the wireless access
point for the wireless connection to be established.

Signal Strength Indicator

See page 13 for more information.

Wireless
LEDs Set-top Operational Status

Five green bars indicate the wireless signal is excellent. The video quality is good.

Four green bars indicate the wireless signal is very good. The video quality is good.

Three green bars indicate the wireless signal is good. The video quality is good.
You must obtain three or more green bars at initial installation.

Two green bars indicate the wireless signal is fair. The video quality is good.

Two red bars indicate the wireless signal is weak. The video quality may be poor.
The STB should be re-oriented to achieve a better wireless signal.

PO WER LINK HD

ISB

7005

T14822

One red bar indicates the wireless signal is very weak. No video can be displayed.
The receiver must be re-oriented to achieve a better wireless signal.

This indicates no wireless connectivity.

11

Connection for ISB7005 Wireless Set-Top

The ISB7005 set-top allows for easy and secure establishment of a wireless home network. The
signal strength indicator on the front panel of the set-top allows you to identify the strength of your
wireless connection.

ISB7005

PO WER LINK HD RECORD MENU

ISB

7005

OK

OK

OK

Signal Strength

Indicator

1. Plug the set-top power supply into an AC power supply that is not controlled by a switch.

2. Plug the power adapter into the set-top.

3. Press the power button on the remote control or the set-top.
Note: The signal indicator lights may  ash for a few minutes when power is  rst applied. Do not

unplug the set-top.

T14706

12

Connecting the Wireless Access Point to the Wireless
Gateway

1.Connect the 12 VDC Power Supply
plug on the access point to the wall
power outlet. Use only the power
adapter provided with the product.

2. Connect the power plug to the power
receptacle on the wireless access point.

3. Connect one end of the RJ-45
Ethernet cable to the Ethernet port on
the wireless access point.

4. Connect the other end of the RJ-45
Ethernet cable to an available Ethernet
port on your wireless gateway.

RJ-45
Cable

Ethernet

Reset

12VDC

To Wall Power Outlet

Power Receptacle

Wireless
Gateway
Ethernet Port

Reset

12VDC

T14961

Ethernet

12VDC

1

1

2
3
4

2 Wi-Fi Protected Setup (WPS) button

3 Wi-Fi Protected Setup (WPS) LED

4 Ethernet LED

Wireless LED

5

5 Power LED

T14853

Note: This illustration may vary from the actual product.

1 Ethernet Port Connects the Wireless Access Point to a

wireless gateway
2 Reset Restores factory default settings when held

for more than 5 seconds

1

Reset

2

3 Power Connects device to the external 12 VDC
power supply

Note: This illustration may vary from the actual product.

3

T14854

Pairing the Wireless Access Point and Set-Top

1. Press the OK button on the set-top.

2. Press the WPS button on the wireless access point.

13

Connecting to the In-Home Network

P

P

TO WALL

(VIDEO IN)

TO TV

(VIDEO OUT)

NETWORK eSATA

TO WALL

(VIDEO IN)

TO TV

(VIDEO OUT)

K

TO WALL
(VIDEO IN)

TO TV

(VIDEO OUT)

K

T14257

Coaxial

In-Home

Coaxial

Network

Wall

Phoneline

OR

Wall

Adapter

CAT-5

OR

In-Home

Phoneline

Network

In-Home

CAT-5

Network

Wall

The following diagrams illustrate examples of the connections you can use to connect your set­top to your in-home network. Contact your service provider for the recommended connection
method for your home. (This section does not apply to the ISB7005; see Connection for ISB7005

Wireless Set-Top on page 12.)
Notes:

• The in-home coaxial and phoneline wiring networks use HomePNA 3.1 technology.

• The illustrations below may vary from the actual product.

NETWOR

NETWOR

14

Connections for a High-De nition TV (HDTV)

DVI

Pr

Pb

Y

Pr

Pb Y

Pr

Pb Y

OPTICAL

OPTICAL

INPUT

OPTICAL

OPTICAL

INPUT

LR

To use the set-top with an HDTV, you must make one of the following connections to view the HD
content. Refer to the owner’s manual for your TV and the cabling diagrams in this manual for more
detailed connection information.

Although all connections provide you with quality service, we list the connections in our
recommended order.

Notes:

• The labeling on your set-top or HDTV may vary slightly from the illustrations shown below.

• Some cables shown in the connection diagrams may not be included with this set-top.

• Set the HD mode and select the output video format (480i, 720p, 1080i) on the set-top.

See page 30 for more information on picture formats.

Use One of These Required

Connections to an HDTV

Some HDTVs have a High-De nition Multimedia
Interface (HDMI) connector. The HDMI connector
provides both a digital video and audio connection.
See the connection diagram on page 18 for an
example.

Note: The HDMI port on the TV must support
high-bandwidth digital content protection (HDCP).

The HDMI connector can provide the connection
to an HDTV with a DVI input. If your HDTV has a
Digital Visual Interface (DVI) connector, you need
an HDMI-to-DVI adapter, and a separate audio
connection (either L/R or optical audio).

DVI HDMIYPbPr

Note: The DVI port on the TV must support

high-bandwidth digital content protection (HDCP).
See the connection diagram on page 19 for an

example.

The YPbPr (red, blue, and green) connectors
provide high-de nition component video signals
to an HDTV, and a separate audio connection
(either L/R or optical audio).

See the connection diagram on page 20 for an
example.

Set-Top

Connections

Adapter Needed

LR

AUDIO

OUT

LR

AUDIO

OUT

HDTV

Connections

Audio/VideoVideoVideo

LR

Audio

Audio

Some HDTVs have only RGB or RGB-HV
connectors. If you have one of these HDTVs,
you need a Component-to-RGB adapter, and
you need a separate audio connection.

RGB

Adapter Needed

LR

AUDIO

OUT

Video

Audio

R

G

B

LR

H

V

15

Connections for a Standard-De nition TV (SDTV)

TO TV

(VIDEO OUT)

VIDEO

OUT

VIDEO

IN

Pr

Pb

Y

LR

Pr

Pb Y

When using the set-top with an SDTV, you must make one of the following connections to view
content. Some SDTVs may not have all these connections. Refer to the owner’s manual for your TV
and the cabling diagrams in this manual for more detailed information.

Although all connections provide you with quality service, we list the connections in our
recommended order.

Notes:

• The labeling on your set-top or SDTV may vary slightly from the illustrations shown below.

• Some cables shown in the connection diagrams may not be included with this set-top.

Use One of These Required

Connections to an SDTV

The YPbPr (red, blue, and green) connectors
can provide standard-de nition component
video signals to an SDTV. A separate audio
connection is also needed.

Note: To connect YPbPr to an SDTV, you
must select the output video format. See

page 30 for more information on picture formats.

YPbPr

See the connection diagram on page 21 for
an example.

The S-Video connection provides an optimal
video connection to SDTVs. A separate audio
connection is also needed.

See the connection diagram on page 22 for
an example.

S-VideoTo TV (Video Out)

The Video Out connector provides a video
connection to an SDTV. A separate audio
connection is also needed.

See the connection diagram on page 23 for
an example.

Video Out

Set-Top

Connections

LR

AUDIO

OUT

S-VIDEO

IN

LR

AUDIO

OUT

LR

AUDIO

OUT

SDTV

Connections

Audio VideoAudio Video

S-VIDEO

IN

LR

LR

Audio Video

16

The To TV (Video Out) connector provides both
a video and audio connection to an SDTV.

See the connection diagram on page 24 for
an example.

CABLE IN/

ANT IN

Audio/Video

Connections for a VCR or DVD Recorder

When using the set-top with a VCR or DVD recorder, you must make one of the following
connections to view content.

Although all connections provide you with quality service, we list the connections in our
recommended order.

Notes:

• The labeling on your set-top, VCR, or DVD recorder may vary slightly from the illustrations shown

below.

• Some cables shown in the connection diagrams may not be included with this set-top.

Use One of These Optional

Connections to a VCR or DVD Recorder

For VCRs or DVD recorders with S-Video In
and Left and Right audio connectors, use the
S-Video and the Audio Out Left and Right
connectors on the set-top.

For VCRs or DVD recorders with Video In and
Left and Right audio connectors, use the Video
Out and the Audio Out connectors (Left and
Right) on the set-top.

VCR/DVD Recorder

See the connection diagram on page 26 for an
example.

Set-Top

Connections

S-VIDEO

IN

LR

AUDIO

OUT

VIDEO

OUT

LR

AUDIO

OUT

VCR/DVD Recorder

Connections

S-VIDEO

IN

Audio Video

Audio Video

LR

VIDEO

IN

LR

17

Connecting to an HDTV with an HDMI Connector

Set-Top

T14738

Pb

P

V

T

T

T

(

)

T

(

)

L

A

P

U

Back of HDTV

HDMI

AUDIO

CENTER

CHANNEL IN

AUDIO IN
DVI/HDCP

ANT (75 )

INOUT

LR

ANT-1

HD 2

Y

OUT

ANT-2

PBPRL

R

VIDEO

L/
MONO

R

L/
MONO

R

AUDIO

IN

ON OFF

IN

HD 1

S-VIDEO

VIDEO

Y

PBPRL

R

AUDIOAUDIO

Cable Used in this Con guration

• 1 HDMI Cable

Notes:

• The HDMI port on the TV must support high-bandwidth digital content protection (HDCP).

• The HDMI interface supports Dolby™ Digital 5.1 audio.

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

O WALL

VIDEO IN

18

O TV

VIDEO OUT

NETWORKeSAT

Y

r

IDEO
OU

AUDIO

OU

R

OPTICAL

OWER

SBS-VIDEO

Connecting to an HDTV with a DVI Connector

Set-Top

Pb

P

V

T

T

T

(

)

T

(

)

L

A

P

U

T14739

AUDIO

OUT

Back of HDTV

AUDIO

CENTER

CHANNEL IN

ANT (75 )

INOUT

ANT-1

HD 2

Y

OUT

ANT-2

PBPRL

R

VIDEO

L/
MONO

R

L/
MONO

R

AUDIO

IN

ON OFF

IN

HD 1

S-VIDEO

VIDEO

Y

PBPRL

R

AUDIOAUDIO

DVI/HDCP

IN

AUDIO IN
DVI/HDCP

LR

OPTICAL

INPUT

OR

Cables Used in this Con guration

• 1 HDMI-to-DVI Cable or 1 HDMI Cable and 1 HDMI-to-DVI Adapter

• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead

of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV’s capabilities.)

Notes:

• The DVI port on the TV must support high-bandwidth digital content protection (HDCP).

• When you connect the HDMI connector to the DVI connector on your HDTV, you need an

HDMI-to-DVI adapter and a separate audio connection.

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

Y

r

OU

IDEO

AUDIO

OU

R

OPTICAL

OWER

SBS-VIDEO

19

Connecting to an HDTV with Component (YPbPr)

Set-Top

T14740

Pb

P

V

T

T

T

(

)

T

(

)

L

A

P

U

Pb Y

Pr

AUDIO

OUT

Back of

HDTV

HDMI

AUDIO

CENTER

CHANNEL IN

AUDIO IN

DVI/HDCP

ANT (75 )

INOUT

LR

ANT-1

HD 2

Y

OUT

ANT-2

PBPRL

R

VIDEO

L/
MONO

R

L/
MONO

R

AUDIO

IN

ON OFF

S-VIDEO

VIDEO

AUDIO

IN

HD 1

Y

PBPRL

R

AUDIO

OPTICAL

INPUT

OR

Connectors

Cables Used in this Con guration

• 1 Component Video Cable (YPbPr)

• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead

of the Audio Left/Right Cable as shown in the diagram, dependent upon your TV’s capabilities.)

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

20

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

Y

r

IDEO
OU

AUDIO

OU

R

OPTICAL

OWER

SBS-VIDEO

Connecting to an SDTV with Component (YPbPr)

Set-Top

Pb

P

V

T

T

T

(

)

T

(

)

L

A

P

U

T14741

Pb Y

Pr

AUDIO

OUT

Back of SDTV

CABLE OUT/

ANT OUT

CABLE IN/

ANT IN

RL

AUDIO

IN

VIDEO

IN

RL

AUDIO

OUT

VIDEO

OUT

Y

PB

PR

Connectors

Cables Used in this Con guration

• 1 Component Video Cable (YPbPr)

• 1 Audio Left/Right Cable

Note: The set-top must be set to the proper standard-de nition mode.

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

R

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

r

IDEO
OU

AUDIO

OU

OPTICAL

OWER

SBS-VIDEO

21

Connecting to an SDTV with an S-Video Connector

Set-Top

Pb

Pr

V

T

T

T

(

)

T

(

)

L

A

P

U

AUDIO

OUT

S-VIDEO

CABLE OUT/

ANT OUT

RL

AUDIO

IN

S-VIDEO

IN

RL

AUDIO

OUT

VIDEO

OUT

VIDEO

IN

CABLE IN/

ANT IN

Back of SDTV

T14742

Cables Used in this Con guration

• 1 S-Video Cable

• 1 Audio Left/Right Cable

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

Y

IDEO
OU

AUDIO

OU

R

OPTICAL

OWER

SBS-VIDEO

22

Connecting to an SDTV with an RCA-Type Connector

Set-Top

T14743

Pb

P

V

T

T

T

(

)

T

(

)

L

A

P

R

U

VIDEO

OUT

AUDIO

OUT

CABLE OUT/

ANT OUT

RL

AUDIO

IN

VIDEO

IN

RL

AUDIO

OUT

VIDEO

OUT

Y

PB

PR

CABLE IN/

ANT IN

Back of SDTV

Cables Used in this Con guration

• 1 RCA-type Video Cable

• 1 Audio Left/Right Cable

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

Y

r

IDEO

OU

AUDIO

OU

R

OPTICAL

OWE

SBS-VIDEO

23

Connecting to an SDTV with a Coaxial Cable

Set-Top

T14744

Pb

P

V

T

T

T

(

)

L

A

P

U

TO TV

(VIDEO OUT)

CABLE OUT/

ANT OUT

RL

AUDIO

IN

VIDEO

IN

RL

AUDIO

OUT

VIDEO

OUT

Y

PB

PR

Back of SDTV

CABLE IN/

ANT IN

Coaxial
Cable

Cable Used in this Con guration

• 1 Coaxial Cable

Note: You must set the channel on your TV to the channel designated by your service provider
(usually channel 3). Contact your service provider for the channel information.

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

O WALL

VIDEO IN

NETWORKeSAT

Y

r

IDEO

OU

AUDIO

OU

R

OPTICAL

OWER

SBS-VIDEO

24

Connecting to a Home Theater System

T14745

Set-Top

Pb

P

V

T

T

T

(

)

T

(

)

L

A

P

U

Pb Y

Pr

AUDIO

OUT

Back of Home
Theater Receiver

COMPONENT VIDEO

1

Y

PB

PR

2

Y

PB

PR

Y

PB

PR

S-VIDEO

DIGITAL
AUDIO

TV/CABLE

1

2

3

4

VIDEO

L

R

AUDIO

S-VIDEO

DVD

VIDEO

L

R

AUDIO

VIDEO

L

R

AUDIO

S-VIDEO

VIDEO 1

S-VIDEO

OUT

VIDEO OUT

MONITOR

VIDEO

L

R

AUDIO

S-VIDEO

OUTIN

OUTIN

OR

with Component (YPbPr) Connectors

Cables Used in this Con guration

• 1 Component Video Cable (YPbPr)

• 1 Audio Left/Right Cable (You can also use an optical cable [indicated by the dotted line] instead

of the Audio Left/Right Cable as shown in the diagram.)

Notes:

• This connection requires that audio is provided by the home theater system.

• Consult the user guide that came with your home theater system for information on connecting

your other video and audio devices.

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

Y

r

IDEO

OU

AUDIO

OU

R

OPTICAL

OWER

SBS-VIDEO

25

Connecting to a Stereo VCR or DVD Recorder

b

Y

Pr

V

T

T

T

(

)

T

(

)

L

A

P

U

L

A

T

V

T

(optional)

The diagram below shows how to connect a recording device to your set-top. Although it
is possible to watch TV using a connection through your VCR or DVD recorder to the TV, this
connection may not provide the best picture, and HDTV users are restricted to an SD format. In
addition, some content is copy protected and passing this content through the recording device
may result in a picture that cannot be viewed.

For these reasons, the connection shown is best used to provide only video and audio to your
recording device and not for normal TV viewing. The connection from the recording device to the
TV (only used for playback of recorded material) depends on the type of device being used, the
outputs that are supported, and the inputs that remain available for use on your TV.

Consult the owner’s manuals provided with your TV and recording device for more details on
connection options.

Cables Used in this Con guration

• 1 RCA-type Video Cable

• 1 Audio Left/Right Cable

WARNING:
Electric shock hazard! Unplug all electronic devices before connecting or

disconnecting any device cables to the set-top.

Connecting your TV directly to the Audio/Video output of your set-top will
assure a more vivid picture and enhance your viewing enjoyment.

Set-Top

O WALL

VIDEO IN

O TV

VIDEO OUT

NETWORKeSAT

P

IDEO

OU

R

LR

AUDIO

OU

OPTICAL

OWER

SBS-VIDEO

Back of Stereo VCR
or DVD Recorder

CABLE IN/

RL

AUDIO

VIDEO

IN

IN

IDEO

OU

UDIO

OU

26

ANT IN

R

CABLE OUT/

ANT OUT

T14746

Troubleshooting

If the set-top does not perform as expected, the following tips may help. If you need further assistance,
contact your service provider.

No Picture

• Verify that the power to your TV is turned on.

• If the set-top is plugged into a wall switch, verify that the switch is in the ON position.

• For the model ISB7005 wireless set-top, verify that the set-top and wireless access point

devices are powered on.

• Verify that all cables are properly connected.

• If your system includes a VCR, DVD recorder, or stereo, verify that you have properly connected

the device to the set-top.

• Verify that you are using the proper input selection to the home theater set-top or TV

• Verify that the set-top is set to the proper screen type and resolution.

• If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the channel

designated by your service provider (usually channel 3). Contact your service provider for the
channel information.

Wireless Set-Top Signal Strength

• Verify that you are able to receive wireless signal. See page 11 for details.

• Optimal operating conditions for wireless set-tops can vary. Performance depends on many

factors, including distance from the access point, building materials, interference, and other
environmental conditions.

No Color or Incorrect Color

• Verify that the current TV program is broadcast in color.

• Adjust the TV color controls.

• If you are using a component video connection (YPbPr), check that all connectors are completely

and properly plugged into the set-top and TV.

• If you are using a component video connection (YPbPr) and your HDTV has only RGB or RGB-HV

connectors, you must use an adapter. You can obtain the adapter through an electronic parts
retailer.

No Sound

• If your setup includes a VCR, DVD recorder, or stereo, verify that you have properly connected

the device to the set-top.

• Verify that the volume is turned up.

• Verify that the mute function is not on.

• Verify the proper input selection to the home theater set-top or TV.

• If you are using coaxial cable to connect to your TV, verify that the TV is tuned to the correct channel.

27

Avoid Screen Burn-In

Images such as letterbox bars or side bars, bright closed-captioning backgrounds, station logos, or
any other stationary images may cause the display in your HDTV to age unevenly; this is known as
screen burn-in. Refer to the owner’s manual that came with your HDTV for more information.

CAUTION:
Avoid screen burn-in.

Do not display the same  xed images on your HDTV screen for extended peri­ods of time.

28

Frequently Asked Questions

What Is Digital Television?

Digital television (DTV) is a huge leap forward in television technology compared to analog television
that has been widely available since the 1940s. DTV is delivered and displayed using digital encoding,
similar to the way a PC operates. By using digital technology, there is no variation in picture and
sound quality from the origination point until it is displayed on your television. You always receive a
high-quality picture without the wavy lines or static you might sometimes get from a weak analog
signal. Another feature of digital television is digital surround sound using Dolby Digital technology,
which is the same technology used to produce the sound you hear in movie theaters.

What Is Standard-De nition Television?

Standard-de nition television (SDTV) is basic digital television programming delivered by your
service provider. Typically, the SDTV screen is the same, nearly square shape as an analog
television screen. Digital images on an SDTV set are crisp and clear—noticeably better than on a
standard analog television set using an antenna to receive over-the-air signals.

What Is High-De nition Television?

High-de nition television (HDTV) is a completely new way to send and receive television broadcast
signals. HDTV images are made up of pixels that are much smaller and closer together than those
used in standard analog television, and there are millions of them. Thus, HDTV can display  ve to six
times the detail of analog television to deliver picture quality that is much more realistic, dimensional,
and precise. SDTV programs can be viewed on an HDTV.

Are Local TV Stations or Other Programmers Broadcasting in HDTV?

Many local TV stations and programmers are transmitting digital signals. However, transmitting
a digital signal does not mean transmitting an HDTV signal. Some stations are using the new
bandwidth to broadcast several standard-de nition channels. Most stations and programmers, once
they begin broadcasting in digital, are o ering HD content from their parent network (for example,
CBS, ABC, NBC, Fox, and PBS). Contact your service provider for more information.

Why Aren’t All the Shows I Watch in High-De nition?

A high-de nition program must originate in HD format and be broadcast in HD format. Having an
HDTV system does not mean that everything you watch will be viewed in high-de nition. Getting the
signal from a digital source also does not mean it is high-de nition.

Why Are Some HDTVs 4:3 Aspect Ratio and Others 16:9?

The aspect ratios di er because television manufacturers build both standard-screen and wide­screen HDTVs to appeal to consumer viewing preferences. The two aspect ratios are as follows:

• On standard-screen (4:3) HDTVs, the programming is displayed in letterbox format in the middle

of the screen. There are bars surrounding the picture.

• On wide-screen (16:9) HDTVs, the programming is displayed on the full screen.

What Is HDMI and Does it Support Dolby Digital 5.1 Audio?

The High-De nition Multimedia Interface (HDMI) is an uncompressed, all-digital audio/video
interface. The Dolby Digital audio format that provides up to 5.1 separate channels of surround
sound, and is the standard used for DVD-Video. HDMI supports standard, enhanced, or high­de nition video, plus multi-channel digital audio, such as Dolby Digital audio, on a single cable.

29

Picture Formats

What Is the Di erence Between a Standard-Screen and a
Wide-Screen HDTV?

The type of screen your HDTV has (wide-screen or standard-screen) determines how the set-top
displays programs on the screen. The picture format for an HDTV is a combination of aspect ratio
and screen resolution and is di erent for standard-screen and wide-screen HDTVs.

What Is Aspect Ratio?

An aspect ratio is the ratio of the width to the height of the TV screen. The aspect ratios di er
because the television industry manufactures both standard-screen and wide-screen HDTVs to
appeal to consumer viewing preferences.

What Is the Screen Resolution?

The screen resolution indicates the amount of detail that the picture displays. Resolution is identi ed
by the number of display lines on the screen. The techniques that an HDTV uses to “paint” the
picture on the screen are referred to as progressive and interlaced.

With the progressive scanning method, the lines are drawn on the screen one at a time in
sequential order. Progressive scanning results in a more detailed image on the screen and is also less
susceptible to the  icker commonly associated with interlaced scanning. The interlaced method
involves refreshing pixels in alternation —  rst the odd lines and then the even lines.

For advanced setup, select the screen resolution that your TV can support. Refer to your HDTV user
manuals to choose the proper screen resolution (480i, 720p, 1080i, or 1080p) for your setup.

For example, a screen resolution of 1080i indicates that the screen shows 1080 lines in an
interlaced display, and 720p indicates that the screens shows 720 lines in a progressive display.

A standard-screen HDTV has a 4x3
aspect ratio. The screen is 4 units wide
for every 3 units tall.

4

3

A screen resolution of 480i  lls the
screen.

A wide-screen HDTV is one-third wider
than a standard-screen HDTV. The screen is
16 units wide for every 9 units tall.

16

9

A screen resolution of 720p or 1080i
 lls the screen.

30

Index

A

AC Power input 9
Arrow keys 8
Aspect ratio 29, 30
Audio Out 9, 15, 16, 17

B

Back panel 9
Burn-in of screen 28
Buttons See Front Panel

C

Cables 10, 18-26
CAT-5 See Ethernet
Coaxial Cable Input 9, 10, 14, 24
Coaxial network connection 14
Compliance, FCC 33
Component video connection. See YPbPr
Connectors
See also Front panel; Back panel
DVD recorder 17
required for HDTV 15
required for SDTV 16
VCR 17
Connecting the set-top to other devices
DVD recorder 9, 14, 17
HDTV with Component input

(YPbPr) 15, 20
HDTV with DVI connector 15, 19
HDTV with HDMI connector 15, 18
Home Theater System with Component input

(YPbPr) 25
SDTV with Component input (YPbPr) 21
SDTV with an S-Video connector 22
SDTV with an RCA-type connector 23
SDTV with Coaxial cable 24
VCR 9, 14, 26

Connection
Coaxial Network 14
Consumer electronic devices 10
Controls See Front panel

D

DC Power output 9
Diagrams. See Connecting the set-top

to other devices
Digital Video Recorder. See DVR
Digital TV, What is it 29
DVD Connection 9, 17, 26
DVI connector 15, 19
DVR 6

E

Ethernet 9, 10, 14

F

FAQs 29
FCC compliance 33
Formats, picture 30
Frequently Asked Questions. See FAQs
Front panel 8

H

Hard disk drive, Caution 8
HD
format 29
HDTV broadcasting 29
HDTV, what is it 29
indicator 8
HDMI 9, 15, 18
High-de nition See HD
Home theater system connection 25

I

Interlaced screen resolution 30
IR sensor 8

31

Index, continued

K

Keys. See Front panel

N

Network 9, 10, 14

O

Optical Audio Output 9, 15, 19, 20, 25

P

Picture formats 30
Ports. See Connectors
Power 8, 9
Progressive screen resolution 30

R

Record programs 6
RGB connector 15, 27

S

S-Video Out 9, 16, 17
S-Video In 16, 17
Safety 4, 5
Scan rates. See screen resolution
Signal Strength Indicator 11, 12
Screen
burn-in 28
resolution 30
size 30
SD
Connections 10, 16, 21, 22, 23, 24
TV, What is it 29
Serial number, locating 7
Sound, performance 27
Standard-de nition TV 10, 16, 21, 22, 23, 24, 29
Standard-screen TV 29, 30

To Wall (Video In) connector 9, 10, 14
To TV (Video Out) connector 9, 16, 24
Troubleshooting 27
TV
digital, what is it 29
formats 29, 30
HDTV, what is it 29
programming 29
recording 6
resolution 30
screen size. See aspect ratio
standard-screen 29, 30
standard-de nition 10, 16, 21, 22, 23, 24, 29
wide-screen 29, 30

U

USB port 8, 9

V

VCR connection 9, 17, 26
Video In. See To Wall
Video Out. See To TV

W

Wide-screen TV 29, 30
Wireless set-top 11, 12
WPS 9

Y

YPbPr
connector 9, 15, 16, 20, 21, 25
HDTV connection 15, 20
home theater connection 25
SDTV connection 16, 21

T

32

FCC Compliance

United States FCC Compliance

This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
such interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment OFF
and ON, the user is encouraged to try to correct the interference
by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit di erent from
that to which the receiver is connected.

• Consult the service provider or an experienced radio/television
technician for help.

Any changes or modi cations not expressly approved by Cisco
Systems, Inc., could void the user’s authority to operate the
equipment.

For operation within 5.15 ~ 5.25 GHz frequency range, it is restricted
to indoor environment.

The information shown in the FCC Declaration of Conformity
paragraph below is a requirement of the FCC and is intended to
supply you with information regarding the FCC approval of this
device. The phone numbers listed are for FCC-related questions

only and not intended for questions regarding the connection or
operation for this device. Please contact your service provider for
any questions you may have regarding the operation or installation
of this device.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject
to the following two conditions: 1) the device may not cause harmful
interference, and 2) the device must accept any interference
received, including interference that may cause undesired operation.

Cisco ISB7000 Series IP Set-Tops

Manufactured by: Cisco Systems, Inc.

5030 Sugarloaf Parkway

Lawrenceville, Georgia 30044 USA

Telephone: [phone]

Canada EMI Regulation

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la class B est conforme à la norme
NMB-003 du Canada.

Software and Firmware Use

The software described in this document is protected by copyright
law and furnished to you under a license agreement. You may only
use or copy this software in accordance with the terms of your
license agreement.

The  rmware in this equipment is protected by copyright law. You
may only use the  rmware in the equipment in which it is provided.
Any reproduction or distribution of this  rmware, or any portion of
it, without our express written consent is prohibited.

Disclaimer

Cisco Systems, Inc. assumes no responsibility for errors or omissions
that may appear in this guide. We reserve the right to change
this guide at any time without notice.

The maximum performance for wireless is derived from IEEE
Standard 802.11 speci cations. Actual performance can vary,
including lower wireless network capacity, data throughput rate,
range and coverage. Performance depends on many factors,
conditions and variables, including distance from the access point,
volume of network tra c, building materials and construction,
operating system used, mix of wireless products used, interference
and other adverse conditions.

20081121 FCC Standard

AVC VIDEO LICENSE

With respect to each AVC/H.264 product, we are obligated to provide
the following notice:

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO
LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER
USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i)
ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC
VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY
A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO
PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR
SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION
MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM.

Accordingly, please be advised that service providers, content providers,
and broadcasters may be required to obtain a separate use license
from MPEG LA prior to any use of AVC/H.264 encoders and/or
decoders.

ENERGY STAR® Notice

Cisco has tested and con rmed that the ISB7000 set-top models
meet the Quali cation Criteria speci ed in the ENERGY STAR
Program Requirements for Set-top Boxes Version 3.0.

ROVI CORPORATION COPYRIGHT
NOTICE

This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights of
Rovi Corporation. Use of this copyright protection technology must
be authorized by Rovi Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Rovi
Corporation. Reverse engineering and disassembly are prohibited.

IC (Industry Canada) Notice

Notice: The Industry Canada (formerly Canadian Department of
Communications) label identi es certi ed equipment. This certi cation
means that the equipment meets certain telecommunications network
protective, operational, and safety requirements. The department does
not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also be installed
using an acceptable method of connection. In some cases, the
company’s inside wiring associated with a single-line individual
service may be extended by means of a certi ed connector assembly
(telephone extension cord). The customer should be aware that
compliance with the above conditions may not prevent degradation
of service in some situations.

Repairs to certi ed equipment should be made by an authorized
Canadian maintenance facility designated by the supplier. Any repairs
or alterations made by the user may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical
ground connections of the power utility, telephone lines and internal
metallic water pipe system, if present, are connected together.
This precaution may be particularly important in rural areas.

CAUTION: Users should not attempt to make such
connections themselves, but should contact the appropriate
electric inspection authority, or electrician, as appropriate.

This device complies with RSS-210 of the Industry Canada Rules.
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.

Caution:

The device for the band 5150-5250 MHz is only for indoor
usage to reduce potential for harmful interference to
co-channel mobile satellite systems.

The maximum antenna gain permitted (for devices in the bands
5250-5725 MHz (5.48 dBi) to comply with the e.i.r.p. limit; and

33

The maximum antenna gain permitted (for devices in the band 5725­5825 MHz (3.44 dBi)) to comply with the e.i.r.p. limits speci ed for
point-to-point and non point-to-point operation as appropriate, as
stated in section A9.2(3).

High power radars are allocated as primary users (meaning they
have priority) of 5250-5350 MHz and 5650-5850 MHz and these
radars could cause interference and/or damage to LE-LAN devices.

RF Exposure Statements

Note: This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 7.9
inches (20 cm) between the radiator and your body.

The availability of some specific channels and/or operational
frequency bands are country dependent and are firmware
programmed at the factory to match the intended destination. The
 rmware setting is not accessible by the end user.

ISB7005 with PCB antenna and max. antenna gain is 5.48 dBi in 5G.

US

This system has been evaluated for RF exposure for humans in reference
to ANSI C 95.1 (American National Standards Institute) limits. The
evaluation was based on evaluation per ANI C 95.1 and FCC OET Bulletin
65C rev 01.01. The minimum separation distance from the antenna
to general bystander is 7.9 inches (20 cm) to maintain compliance.

Canada

This system has been evaluated for RF exposure for humans in
reference to Canada Health Code 6 (2009) limits. The evaluation was
based on evaluation per RSS-102 Rev 4. The minimum separation
distance from the antenna to general bystander is 7.9 inches (20 cm)
to maintain compliance.

Note: The ISB7005 has disabled the 5600-5650M band by S/W
to avoid 5600-5650M band for IC certi cation.

EU

This system has been evaluated for RF exposure for humans in
reference to the ICNIRP (International Commission on Non-Ionizing
Radiation Protection) limits. The evaluation was based on the EN 50385
Product Standard to Demonstrate Compliance of Radio Base Stations
and Fixed Terminals for Wireless Telecommunications Systems with
basic restrictions or reference levels related to Human Exposure to
Radio Frequency Electromagnetic Fields from 300 MHz to 40 GHz. The
minimum separation distance from the antenna to general bystander is
20 cm (7.9 inches).

Australia

This system has been evaluated for RF exposure for humans as
referenced in the Australian Radiation Protection standard and has
been evaluated to the ICNIRP (International Commission on Non­Ionizing Radiation Protection) limits. The minimum separation distance
from the antenna to general bystander is 20 cm (7.9 inches).

20090317 FCC DSL_Dom and Intl

CE Compliance

Declaration of Conformity with
Regard to the EU Directive 1999/5/EC
(R&TTE Directive)

This declaration is only valid for con gurations (combinations of
software,  rmware and hardware) supported or provided by Cisco
Systems for use within the EU. The use of software or  rmware not
supported or provided by Cisco Systems may result in the equipment
no longer being compliant with the regulatory requirements.

Български

[Bulgarian]

[Czech]:

[Danish]:

Това оборудване отговаря на съществените
изисквания и приложими клаузи на Директива
1999/5/ЕС.

Česky

Toto zařízení je v souladu se základními požadavky
a ostatními odpovídajícími ustanoveními Směrnice
1999/5/EC.

Dansk

Dette udstyr er i overensstemmelse med de
væsentlige krav og andre relevante bestemmelser
i Direktiv 1999/5/EF.

Deutsch

[German]:

[Estonian]:

English: This equipment is in compliance with the essential

Español

[Spanish]:

Ελληνική

[Greek]:

Français
[French]:

Íslenska

[Icelandic]:

[Italian]:

[Latvian]:

Lietuvių
[Lithuanian]:
Nederlands

[Dutch]:

[Maltese]:

Magyar
[Hungarian]:

[Norwegian]:

[Polish]:

Português

[Portuguese]:

Română

[Romanian]

Slovensko

[Slovenian]:

Slovensky

[Slovak]:

[Finnish]:

Svenska

[Swedish]:

Note: The full declaration of conformity for this product can be
found in the Declarations of Conformity and Regulatory Information
section of the appropriate product hardware installation guide,
which is available at http://www.cisco.com/web/consumer/support/
compliance_info.html.

The CE mark and class-2 identi er is a xed to the product and its
packaging. This product conforms to the following European directives:

Dieses Gerät entspricht den grundlegenden
Anforderungen und den weiteren entsprechenden
Vorgaben der Richtlinie 1999/5/EU.

Eesti

See seade vastab direktiivi 1999/5/EÜ olulistele
nõuetele ja teistele asjakohastele sätetele.

requirements and other relevant provisions of
Directive 1999/5/EC.
Este equipo cumple con los requisitos esenciales
asi como con otras disposiciones de la Directiva
1999/5/CE.
Αυτός ο εξοπλισμός είναι σε συμμόρφωση με τις
ουσιώδεις απαιτήσεις και άλλες σχετικές διατάξεις
της Οδηγίας 1999/5/EC.
Cet appareil est conforme aux exigences essentielles
et aux autres dispositions pertinentes de la Directive
1999/5/EC.
Þetta tæki er samkvæmt grunnkröfum og öðrum
viðeigandi ákvæðum Tilskipunar 1999/5/EC.

Italiano

Questo apparato é conforme ai requisiti essenziali
ed agli altri principi sanciti dalla Direttiva 1999/5/CE.

Latviski

Šī iekārta atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.
Šis įrenginys tenkina 1999/5/EB Direktyvos esminius
reikalavimus ir kitas šios direktyvos nuostatas.
Dit apparaat voldoet aan de essentiele eisen en
andere van toepassing zijnde bepalingen van de
Richtlijn 1999/5/EC.

Malti

Dan l-apparat huwa konformi mal-ħtiġiet essenzjali
u l-provedimenti l-oħra rilevanti tad-Direttiva
1999/5/EC.
Ez a készülék teljesíti az alapvető követelményeket
és más 1999/5/EK irányelvben meghatározott
vonatkozó rendelkezéseket.

Norsk

Dette utstyret er i samsvar med de grunnleggende
krav og andre relevante bestemmelser i EU-direktiv
1999/5/EF.

Polski

Urządzenie jest zgodne z ogólnymi wymaganiami
oraz szczególnymi warunkami określonymi
Dyrektywą UE: 1999/5/EC.
Este equipamento está em conformidade com os
requisitos essenciais e outras provisões relevantes
da Directiva 1999/5/EC.
Acest echipament este in conformitate cu cerintele
esentiale si cu alte prevederi relevante ale Directivei
1999/5/EC.
Ta naprava je skladna z bistvenimi zahtevami in
ostalimi relevantnimi pogoji Direktive 1999/5/EC.
Toto zariadenie je v zhode so základnými
požiadavkami a inými príslušnými nariadeniami
direktív: 1999/5/EC.

Suomi

Tämä laite täyttää direktiivin 1999/5/EY olennaiset
vaatimukset ja on siinä asetettujen muiden laitetta
koskevien määräysten mukainen.
Denna utrustning är i överensstämmelse med de
väsentliga kraven och andra relevanta bestämmelser
i Direktiv 1999/5/EC.

-1999/5/EC for ISB7005 set-tops

-2006/95/EC

-2004/108/EC

for all other ISB7000 set-tops

National Restrictions

This product operates in the 5 GHz Wi-Fi bands and shall only be
used indoors.

20110311 CE_Gateway

34

Cisco Systems, Inc. 678 277-1120

5030 Sugarloaf Parkway, Box 465447 800 722-2009
Lawrenceville, GA 30042 www.cisco.com

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its a liates in the U.S. and other
countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.

ENERGY STAR and the ENERGY STAR mark are registered trademarks of the U.S. government.
HDMI, the HDMI logo, and High-De nition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.
HomePNA is a trademark of HomePNA Alliance.
Rovi is a trademark of Rovi Corporation.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1009R)
© 2011 Cisco and/or its a liates. All rights reserved.
December 2011 Part Number 4028464 Rev A