Cisco IR800 Series, IR807 Hardware Installation Manual

Cisco IR807 Industrial Integrated Services Router Hardware Installation
Guide

First Published: 2017-11-10

Last Modified: 2018-10-12

Americas Headquarters

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: [phone]

800 553-NETS (6387)

Fax: [phone]

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,
INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH
THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,
CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain version of
the UNIX operating system. All rights reserved. Copyright©1981, Regents of the University of California.

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS" WITH ALL FAULTS.
CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network
topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional
and coincidental.

All printed copies and duplicate soft copies of this document are considered uncontrolled. See the current online version for the latest version.

Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com

go trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any

other company. (1721R)

©

2017–2018 Cisco Systems, Inc. All rights reserved.

Preface

Objective

Audience

CHAPTER 1

Preface

This preface describes the objectives, audience, organization, and conventions of this guide and describes
related documents that have additional information. It contains the following sections:

• Preface, on page 1

This preface describes the objectives, audience, organization, and conventions of this guide and describes
related documents that have additional information. It contains the following sections:

This guide provides an overview and explains how to install, connect, and perform initial configuration for
the IR807.

Conventions

This guide is intended for people who have a high level of technical ability, although they may not have
experience with Cisco software.

This section describes the conventions used in this guide.

NOTE: Means reader take note. Notes contain helpful suggestions or references to additional information
and material.

CAUTION: This symbol means reader be careful. In this situation, you might do something that could result
in equipment damage or loss of data.

TIP: Means the following information will help you solve a problem . The tip information might not be
troubleshooting or even an action, but could be useful information.

WARNING: IMPORTANT SAFETY INSTRUCTIONSMeans danger. You are in a situation that could
cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents. Use the statement number

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

1

Safety Warnings

provided at the end of each warning to locate its translation in the translated safety warnings that
accompanied this device.

Safety Warnings

Note: If installing this product in a hazardous location (class I, zone/division 2), please refer to the Product
Documentation and Compliance Information guide provided with each unit for additional instructions.

Preface

Danger

Danger

Danger

Waarschuwing

Varoitus

Danger

Danger

Danger

Danger

Danger

Danger

Danger

Danger

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. Use the statement number provided at
the end of each warning to locate its translation in the translated safety warnings that accompanied
this device. Statement 1071

SAVE THESE INSTRUCTIONS

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan
veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij
elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard
praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de
waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt
raadplegen.

BEWAAR DEZE INSTRUCTIES

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin
käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien
yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen
käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden
avulla.

Danger

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

2

Attention

Danger

Danger

Danger

Danger

SÄILYTÄ NÄMÄ OHJEET

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant
entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez
conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures
couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des
avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil,
référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Preface

Safety Warnings

Danger

Danger

Danger

Warnung

Avvertenza

Advarsel

Danger

Danger

Danger

Danger

Danger

Danger

Danger

Danger

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen
führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen
und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende
jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den
übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle
persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti.
Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le
traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du
begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med
elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i
slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte
med denne enheten.

Danger

Danger

Aviso

¡Advertencia!

Danger

Danger

Danger

Danger

Danger

Danger

Danger

TA VARE PÅ DISSE INSTRUKSJONENE

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de
lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos
perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais
de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para
localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular
cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los
procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el
número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña
a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

3

Safety Warnings

Preface

Danger

Varning!

Danger

Danger

Danger

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada.
Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och
känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet
av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer
denna anordning.

SPARA DESSA ANVISNINGAR

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

4

Preface

Safety Warnings

Danger

Danger

Aviso

Advarsel

Danger

Danger

Danger

Danger

Danger

Danger

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de
lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que
envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes.
Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos
avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for
legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de
involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer
til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen
i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

5

Safety Warnings

Preface

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

6

Preface

Safety Warnings

Danger

WARNING: When installing the product, please use the provided or designated connection cables/power
cables/AC adapters. Using any other cables/adapters could cause a malfunction or a fire. Electrical Appliance
and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for
any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical
Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated
products. Statement 371

WARNING: Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people and damage
to the system. Statement 378

WARNING: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to
telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV
circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement
1021

WARNING: T his equipment must be grounded. Never defeat the ground conductor or operate the equipment
in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority
or an electrician if you are uncertain that suitable grounding is available . Statement 1024

WARNING: If the symbol of suitability with an overlaid cross appears above a port, you must not connect
the port to a public network that follows the European Union standards. Connecting the port to this type of
public network can cause severe personal injury or can damage the unit. Statement 1031

WARNING: Connect the unit only to DC power source that complies with the safety extra-low voltage
(SELV) requirements in IEC 60950 based safety standards. Statement 1033

WARNING: For connections outside the building where the equipment is installed, the following ports must
be connected through an approved network termination unit with integral circuit protection: 10/100/1000
Ethernet. Statement 1044

WARNING: When installing or replacing the unit, the ground connection must always be made first and
disconnected last. Statement 1046

WARNING: Do not locate the antenna near overhead power lines or other electric light or power circuits, or
where it can come into contact with such circuits. When installing the antenna, take extreme care not to come
into contact with such circuits, because they may cause serious injury or death. For proper installation and
grounding of the antenna, please refer to national and local codes (for example, U.S.:NFPA 70, National
Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 1052

WARNING: No user-serviceable parts inside. Do not open. Statement 1073

WARNING: Installation of the equipment must comply with local and national electrical codes. Statement

1074

WARNING: Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 1030

WARNING: Read the installation instructions before connecting the system to the power source. Statement
1004

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

7

Searching Cisco Documents

WARNING: Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040

WARNING: The covers are an integral part of the safety design of the product. Do not operate the unit without
the covers installed. Statement 1077

WARNING: Hot surface. Statement 1079

Searching Cisco Documents

To search an HTML document using a web browser, press Ctrl-F (Windows) or Cmd-F (Apple). In most
browsers, the option to search whole words only, invoke case sensitivity, or search forward and backward is
also available.

To search a PDF document in Adobe Reader, use the basic Find toolbar (Ctrl-F) or the Full Reader Search
window (Shift-Ctrl-F). Use the Find toolbar to find words or phrases within a specific document. Use the
Full Reader Search window to search multiple PDF files simultaneously and to change case sensitivity and
other options. Adobe Reader’s online help has more information about how to search PDF documents.

Preface

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information,
see the monthly What’s New in Cisco Product Documentation , which also lists all new and revised Cisco
technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS Version 2.0.

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

8

Product Overview

This chapter provides an overview of the features available for the Cisco 807 Integrated Services Routers
(ISRs) and contains the following sections:

• Product Overview, on page 9

Product Overview

This chapter provides an overview of the features available for the Cisco 807 Integrated Services Routers
(ISRs) and contains the following sections:

NOTE: For compliance and safety information, see Regulatory Compliance and Safety Information for Cisco

800 Series

General Description

The Cisco IR807 Integrated Services Routers (ISRs) (IR807), part of the Cisco Integrated Services Routers
Generation 2 (ISR G2) Family, is designed as a next generation ruggedized fixed form factor router. It is a
small-form router with 4G, for use in ATM, POS, Telemetry, Billboards, Enterprise Fleet markets, Utilities
and other SCADA (Supervisory Control and Data Acquisition) environments.

CHAPTER 2

Hardware Overview

This section covers the overview of the IR807.

SKU Information

Table 1: Supported SKUs for Cisco IR807s, on page 9 lists the different SKUs available for the Cisco 807

Integrated Services Router. All SKUs support external antenna.

Table 1: Supported SKUs for Cisco IR807s

DescriptionSKU ID

Modem
Type

WP7601North America (Verizon)IR807G-LTE-VZ-K9

WP7504North America (AT&T)IR807G-LTE-NA-K9

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

9

Front Panel Icons and LEDs

Product Overview

DescriptionSKU ID

Note: The IR809G-LTE-VZ-K9 SKU has a single SIM card socket. The IR807G-LTE-NA-K9 and
IR807G-LTE-GA-K9 are equipped with dual SIM card sockets. Graphics in this guide show the dual SIM
SKUs.

Front Panel Icons and LEDs

The IR807 uses icons to show the different features of the device. Table 2: Icons with LEDs, on page 10
shows Icons and their associated LEDs with descriptions. LEDs are visible from the top cover and from the
front panel. The LEDs allows easy visibility for wall and desk mounted installations regardless of chassis
orientation. Table 4: Icons only, on page 11 shows the Icons without associated LEDs and their descriptions.

Table 2: Icons with LEDs

System - Power and System Status.

Off — No power

Green Steady on — Normal operation

Modem
Type

WP7502EMEAIR807G-LTE-GA-K9

Description/ActivityIconDescription/ActivityIcon

Alarm - Alarm Input Status

Off — Normal operation

Red - Alarm State on the Alarm Input

Green Flashing — Boot up phase or in ROM Monitor
mode

Amber Steady on — Power is OK but possible internal
FPGA program failure

Off — No VPN tunnel

Steady Green — At least one VPN tunnel is up

GPS - GPS Status

Off — GPS not configured

Steady Green — GPS configured

Slow Flash — GPS Acquiring in Standalone GPS

Fast Flash — GPS Acquiring in Assisted GPS

Slow Flash is defined as the LED will be on for 0.25
seconds and off for 0.75 seconds.Fast Flash is defined
as the LED will be on for 0.25 seconds and off for

0.25 seconds.

User Configurable LEDVPN

RJ45 Fast Ethernet Ports -Link Status 0:1

Off — No link

Steady Green — Link is up

Flashing — Transmitting and Receiving data

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

10

Product Overview

Front Panel Icons and LEDs

Description/ActivityIconDescription/ActivityIcon

Table 3: RSSI LEDs

RSSI - Received Signal Strength Indication

The RSSI LEDs are a 3 LED bar graph to indicate
signal strength. Their functionality is described in the
RSSI LED Table 3: RSSI LEDs, on page 11.

RSSI (0)RSSI (1)RSSI (2)RSSI

Green/AmberGreenGreen

SIM Slots - SIM0/SIM1

Off — No USIM

Green — USIM installed and active

WWAN - Wireless WAN Activity

Off — Offline

On — In Service

Flash (on 200ms off 5 sec) — No Service

Flash (on 1 sec off 1 sec) — Low Power
Mode

Flash (on 5 sec off 200ms) — Roaming

Flash (on 400ms off 100ms) — Data Active

-90dBm

> -60dBm

Table 4: Icons only

Off-75 to -60dBm

On ­Green

Console

OffOffOff< -110dBm

On - AmberOffOff-110 to

On - GreenOffOff-90 to -75dBm

On - GreenOn -

Green

On - GreenOn -

Green

DescriptionIconDescriptionIcon

USB 2.0 Type A Port for Storage and
Networking

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

11

Front Panel Icons and LEDs

Product Overview

DescriptionIconDescriptionIcon

Reset ButtonGrounding point (located on side of device)

DC Power ReturnDC Power Input (12V to 48V)

Alarm INAlarm Common

Fast Ethernet PortsSerial Ports

Antenna 1 (TNC) DivAntenna 1 (TNC) Main

Warning

Figure 1: Cisco IR807 Front Panel, on page 13shows the front panel details of the Cisco IR807.

Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide

12