Data Sheet
Cisco Firepower 1000 Series
Enterprise Firewall
Next-Generation Firewall
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Pu blic Infor mation. Page 1 of 7
Contents
Cisco Firepower 1000 Series Appliances 3
Model overview 3
Detailed performance specifications and feature highlights 3
Hardware specifications 5
Cisco Capital 7
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Public Infor mation. Page 2 of 7
Model
NGFW
Next-Generation
Intrusion Prevention
System (NGIPS)
Interfaces
FPR-1010
650 Mbps
650 Mbps
8 x RJ45
FPR-1120
1.5 Gbps
1.5 Gbps
8 x RJ45, 4 x SFP
FPR-1140
2.2 Gbps
2.2 Gbps
8 x RJ45, 4 x SFP
Features
1010
1120
1140
Throughput: Firewall (FW) +
Application Visibility and Control
(AVC) (1024B)
650 Mbps
1.5 Gbps
2.2 Gbps
Throughput: FW + AVC + Intrusion
Prevention System (IPS) (1024B)
650 Mbps
1.5 Gbps
2.2 Gbps
Maximum concurrent sessions,
with AVC
100K
200K
400K
Maximum new connections per
second, with AVC
6K
15K
22K
Transport Layer Security (TLS)
150 Mbps
700 Mbps
1 Gbps
Cisco Firepower 1000 Series Appliances
The Cisco Firepower® 1000 Series is a family of three threat-focused Next-Generation Firewall (NGFW) security platforms
that deliver business resiliency through superior threat defense. It offers exceptional sustained performance when
advanced threat functions are enabled. The 1000 Series’ throughput range addresses use cases from the small office,
home office, remote branch office to the Internet edge. The 1000 Series platforms run Cisco Firepower Threat Defense
(FTD). Support for Cisco® Adaptive Security Appliance (ASA) Firewall will be added in a later release.
Model overview
Cisco Firepower 1000 Series summary
Detailed performance specifications and feature highlights
Table 1. Performance specifications and feature highlights for Cisco Firepower 1000 with the Cisco Firepower Threat Defense image
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Public Infor mation. Page 3 of 7
Features
1010
1120
1140
Throughput: NGIPS (1024B)
650 Mbps
1.5 Gbps
2.2 Gbps
IPSec VPN throughput (1024B
TCP w/Fastpath)
300 Mbps
1 Gbps
1.2 Gbps
Maximum VPN Peers
75
150
400
Cisco Firepower Device Manager
(local management)
Yes
Yes
Yes
Centralized management
Centralized configuration, logging, monitoring, and reporting are performed by the Management
Center or alternatively in the cloud with Cisco Defense Orchestrator
AVC
Standard, supporting more than 4000 applications, as well as geolocations, users, and websites
AVC: OpenAppID support for
custom, open-source application
detectors
Standard
Cisco Security Intelligence
Standard, with IP, URL, and DNS threat intelligence
Cisco Firepower NGIPS
Available; can passively detect endpoints and infrastructure for threat correlation and Indicators of
Compromise (IoC) intelligence
Cisco Advanced Malware
Protection (AMP) for Networks
Available; enables detection, blocking, tracking, analysis, and containment of targeted and persistent
malware, addressing the attack continuum both during and after attacks. Integrated threat
correlation with Cisco AMP for Endpoints is also optionally available.
Cisco AMP Threat Grid
sandboxing
Available
URL filtering: number of
categories
More than 80
URL filtering: number of URLs
categorized
More than 280 million
Automated threat feed and IPS
signature updates
Yes: class-leading Collective Security Intelligence (CSI) from the Cisco Talos® group
(https://www.cisco.com/c/en/us/products/security/talos.html)
Third-party and open-source
ecosystem
Open API for integrations with third-party products; Snort® and OpenAppID community resources for
new and specific threats
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Public Infor mation. Page 4 of 7
Features
1010
1120
1140
High availability and clustering
Active/standby
Cisco Trust Anchor Technologies
Cisco Firepower 1000 Series platforms include Trust Anchor Technologies for supply chain and
software image assurance. Please see the section below for additional details.
Features
Cisco Firepower model
1010
1120
1140
Dimensions (H x W x D)
1.82 x 7.85 x 8.07 in.
1.72 x 17.2 x 10.58 in.
1.72 x 17.2 x 10.58 in.
Form factor (rack units)
DT
1RU
1RU
Integrated I/O
8 x RJ-45
8 x RJ-45, 4 x SFP
8 x RJ-45, 4 x SFP
Integrated network
management ports
1 x 10M/100M/1GBASE-T
Ethernet port (RJ-45)
1 x 10M/100M/1GBASE-T
Ethernet port (RJ-45)
1 x 10M/100M/1GBASE-T
Ethernet port (RJ-45)
Serial port
1 x RJ-45 console
1 x RJ-45 console
1 x RJ-45 console
USB
1 x USB 3.0 Type-A (500mA)
1 x USB 3.0 Type-A (500mA)
1 x USB 3.0 Type-A (500mA)
Storage
1 x 200 GB
1 x 200 GB
1 x 200 GB
Power supply configuration
+12V and -53.5V
+12V
+12V
AC input voltage
100 to 240V AC
100 to 240V AC
100 to 240V AC
AC maximum input current
< 2A at 100V, < 1A at 240V
< 2A at 100V, < 1A at 240V
< 2A at 100V, < 1A at 240V
AC maximum output power
115W (55W of +12V and 60W of -
53.5V)
100W
100W
AC frequency
50 to 60 Hz
50 to 60 Hz
50 to 60 Hz
AC efficiency
>88% at 50% load
>85% at 50% load
>85% at 50% load
Redundancy
None
None
None
Fans
None
1 integrated fan2
1 integrated fan2
NOTE: Performance will vary depending on features activated, and network traffic protocol mix, and packet size
characteristics. Performance is subject to change with new software releases. Consult your Cisco representative for
detailed sizing guidance.
Performance testing methodologies LINK
Hardware specifications
Table 2. Cisco Firepower 1000 Series hardware specifications
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Public Infor mation. Page 5 of 7
Features
Cisco Firepower model
Noise
0 dBA
31.7 dBA @ 25C, 56.8 dBA at
highest system performance
34.2 dBA @ 25C, 56.8 dBA at
highest system performance
Rack mountable
Yes. Separate kit must be
ordered.
Yes. Fixed mount brackets
included (2-post).
Yes. Fixed mount brackets
included (2-post).
Weight
3 lb (1.36 kg)
8 lb (3.63 kg)
8 lb (3.63 kg)
Temperature: operating
32 to 104°F (0 to 40°C)
32 to 104°F (0 to 40°C)
32 to 104°F (0 to 40°C)
Temperature: nonoperating
-13 to 158°F (-25 to 70°C)
-13 to 158°F (-25 to 70°C)
-13 to 158°F (-25 to 70°C)
Humidity: operating
90% noncondensing
90% noncondensing
90% noncondensing
Humidity: nonoperating
10 to 90% noncondensing
10 to 90% noncondensing
10 to 90% noncondensing
Altitude: operating
9843 ft (max)
3000 m (max)
9843 ft (max)
3000 m (max)
9843 ft (max)
3000 m (max)
Altitude: nonoperating
15,000 ft (max)
15,000 ft (max)
15,000 ft (max)
Specification
Description
Regulatory compliance
Products comply with CE markings per directives 2004/108/EC and 2006/108/EC
Safety
● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● EN 60950-1
● IEC 60950-1
● AS/NZS 60950-1
● GB4943
EMC: emissions
● 47CFR Part 15 (CFR 47) Class A (FCC Class A)
● AS/NZS CISPR22 Class A
● CISPR22 CLASS A
● EN55022 Class A
● ICES003 Class A
● VCCI Class A
● EN61000-3-2
● EN61000-3-3
● KN22 Class A
● CNS13438 Class A
● EN300386
● TCVN7189
Table 3. Cisco Firepower 1000 Series regulatory, safety, and EMC compliance
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Public Infor mation. Page 6 of 7
Specification
Description
EMC: immunity
● EN55024
● CISPR24
● EN300386
● KN24
● TVCN 7317
● EN-61000-4-2, EN-61000-4-3, EN-61000-4-4, EN-61000-4-5, EN-61000-4-6, EN-61000-4-8, EN61000-4-11
Cisco Capital
Flexible payment solutions to help you achieve your objectives
Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation
and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate
growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and
complementary third-party equipment in easy, predictable payments. Learn more.
Printed in USAs C78-742469-01 07/19
© 2 019 Cisco and /or its affiliat es. All r ights res erved. This docu ment is Cisco Public Infor mation. Page 7 o f 7
Loading...