Cisco 1811W, Configuration Professional Express 1.0 Release Note

Release Notes for Cisco Configuration Professional Express 1.0
May 19, 2008
These release notes support Cisco Configuration Professional Express (Cisco CP Express) 1.0. They should be used with the documents listed in the “Related Documentation” section on page 15 and in particular, the Release Notes for Cisco Configuration Prefessional.
These release notes are updated as needed. To ensure that you have the latest version of these release notes, go to http://www.cisco.com/go/ciscocp. In the Support box, click General Information > Release Notes. Then, find the latest release notes for your release.
Contents
Introduction
This document contains the following sections:
Introduction, page 1
System Requirements, page 2
Installation Notes, page 8
Limitations and Restrictions, page 9
Important Notes, page 9
Caveats, page 12
Related Documentation, page 15
Cisco CP Express is a graphical configuration tool that enables a user to configure a LAN and WAN connection, make security settings to protect the router, and, configure a basic firewall, and Network Address Translation. Cisco CP Express is installed in Flash memory on routers shipped with Cisco Configuration Professional (Cisco CP).
Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2008 Cisco Systems, Inc. All rights reserved.
System Requirements
System Requirements
This sections describes PC and router system requirements. It contains the following parts:
PC System Requirements, page 2
Router System Requirements, page 2
Cisco IOS Releases, page 6
Cisco CP Ordering Options, page 7
PC System Requirements
Cisco CP Express can run under the native Java Virtual Machine in the supported browsers, and also JRE.
Table 1 lists the system requirements for a PC running Cisco CP Express including Web browser
versions and Java runtime environment versions.
Table 1 PC System Requirements
System Component Requirement
Operating System Any of the following:
Browser Cisco CP Express can be used with the following browsers:
Screen Resolution 1024 X 768
Java Runtime Environment Cisco CP Express can run under the native Java Virtual Machine in the
Router System Requirements
Supported Routers, page 2
Microsoft Windows Vista Business Edition. Microsoft
recommends this operating system be installed in administrator mode.
Microsoft Windows Vista Ultimate Edition. Microsoft recommends
this operating system be installed in administrator mode.
Microsoft Windows XP with Service Pack 2
Firefox 1.0.6 and later versions
Internet Explorer 5.5 and later versions
Netscape 7.1, 7.2, and 9.0
supported browsers, and also under the Java Runtime Environment.
Supported Adapters, Cards and Network Modules, page 4
Cisco IOS Releases, page 6
Supported Routers
This section lists the routers that Cisco CP Express supports, by series.
Release Notes for Cisco Configuration Professional Express 1.0
2
OL-16652-01
Note Cisco CP Express does not support Telco/CO router models.
Cisco 800 Series
Cisco CP Express is supported on the following Cisco 800 series routers:
Cisco 815
Cisco 861
Cisco 881
Cisco 888
Cisco 1800 Series
Cisco CP Express is supported on the following Cisco 1800 series routers:
Cisco 1801
Cisco 1801W
Cisco 1801W-M
Cisco 1801M
Cisco 1802
System Requirements
Cisco 1802W
Cisco 1803
Cisco 1803W
Cisco 1805
Cisco 1811
Cisco 1811W
Cisco 1812
Cisco 1812W
Cisco1812J
Cisco 1812W-J
Cisco 1812W-P
Cisco 1841
Cisco 1861
Cisco 2800 Series
Cisco CP Express is supported on the following 2800 series routers:
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
OL-16652-01
Release Notes for Cisco Configuration Professional Express 1.0
3
System Requirements
Cisco 3800 Series
Cisco CP Express is supported on the following Cisco 3800 series routers:
Cisco 3825
Cisco 3845
Supported Adapters, Cards and Network Modules
This section contains support information about adapters, cards, and network modules
Network Modules
Cisco CP Express supports the following network modules:
NM-4T
NM-1FE2W-V2
NM-1FE-FX-V2
NM-2FE2W-V2
NM-1FE-FX
NM-4A/S (synchronous only)
NM-8A/S (synchronous only)
NM-CIDS-K9
NM-16ESW
NM-16ESW-1GIG
NM-16ESW-PWR
NM-16ESW-PWR-1GIG
NMD-36ESW-PWR
NMD-36ESW-PWR-2GIG
Cisco CP Express supports the following EtherSwitch Service Network Modules:
NME-16ES-1G-P
NME-X-23ES-1G-P
NME-XD-24ES-1S-P
NME-XD-48ES-2S-P
WAAS Modules
Cisco CP Express supports the following Wide Area Application Services (WAAS) modules:
NME-WAE-502-K9
NME-WAE-522-K9
NME-WAE-302-K9
WAN Interface Cards
Cisco CP Express supports the following WAN interface cards:
WIC-1T
Release Notes for Cisco Configuration Professional Express 1.0
4
OL-16652-01
System Requirements
WIC-2T
WIC-2A/S (Frame Relay, PPP, HDLC, no asynchronous)
WIC-1ADSL
WIC-1SHDSL
WIC-1DSU-T1-V2
WIC-1B-S/T-V3
WIC-1AM
WIC-2AM
WIC-4ESW
WIC-1SHDSL-V2
WIC-1SHDSL-V3
WIC 1ADSL-DG
WIC 1ADSL-I-DG
Cisco CP Express supports the following high-speed WAN interface cards (HWICs):
HWIC-4T
HWIC-4A/S
HWIC-4ESW
HWIC-8A/S-232
HWICD-9ESW
HWIC-16A
HWIC-AP-G-X
HWIC-AP-AG-X
HWIC-ADSL-B/ST
HWIC-ADSLI-B/ST
HWIC-1ADSL
HWIC-1ADSLI
HWIC1-ADSL-M
HWIC-1CABLE-D
HWIC-1CABLE-E/J
HWIC-1FE
HWIC-2FE
HWIC-2SHDSL
HWIC-4SHDSL
AIM Modules
Cisco CP Express supports the following advanced integration modules (AIMs):
AIM-VPN/BPII-PLUS
AIM-VPN/HPII-PLUS
OL-16652-01
Release Notes for Cisco Configuration Professional Express 1.0
5
Loading...
+ 11 hidden pages