
QUICK START GUIDE
Cisco Business 220 Series Smart Switches
Thank you for choosing the Cisco Business 220 Series Switch.
These switches are designed to be operational right out of the box as standard switches.
In the default conguration, the switch forwards packets between the connected devices after
powering up.
Product Features
What’s in the Box
● Cisco Business 220 Series Smart Switch
● Power Cord or Adapter
● Rack-Mount Kit and Rubber Feet
● Quick Start Guide
● Pointer Card with China RoHS
● Technical Support Contacts
First, You’ll Need...
2
1
6
● RJ-45 Ethernet cables (Category 5e or higher)
for connecting network devices
● Tools for mounting the hardware
Reset Button
1
System LED
2
LINK/ACT LEDs
3
PoE (Power over Ethernet) LEDs *
4
SFP/SFP+ Uplink Ports
5
Console Port
6
3
● Computer with an Ethernet port (or adapter) and a web browser
(Firefox, Chrome, Safari, or Edge) for Web UI setup
● A mobile device with Wi-Fi capability (to set up using the mobile app)
4
5
Cisco Business 220 Series Smart Switches | Quick Star t Guide
* PoE product shown. For non-PoE products there is a Gigabit LED instead of a PoE LED.

Get Connected
Plug the power cord of the switch into an outlet.
GbE
Preparing Your Switch
Using the Mobile app: Connect the switch to an existing wireless network. This could be a wireless access point
(shown above), wireless router, or mesh extender. You will need something to act as your DHCP server (a router or
switch as shown above). Once connected, proceed to the “Get Congured” section to download the app.
Using the Web User Interface (UI): Connect a computer to one of the switch ports with an Ethernet cable. Make sure
your computer is on and proceed to the Web UI Setup instructions under the “Get Congured” section.
Get Congured
Download the Cisco Business Mobile app
Scan the QR code here to download the app or go to cisco.com/go/cbsapp and
follow the installation instructions.
Alternative: Web UI Setup
1
The switch will attempt to acquire an IP address if there is a DHCP server in the network. If the switch cannot
acquire an IP address through DHCP, it uses the factory default IP address of 192.168.1.254, with a subnet mask
of /24.
●
If the switch is using the factory default IP address of 192.168.1.254/24, you must choose an IP address for the
computer in the range of 192.168.1.2-192.168.1.253 that is not already in use.
2
Open a web browser window.
3
Enter the switch IP address in the address bar and press Enter. For example, h t t p://19 2.16 8 .1. 2 54.
The Switch Login Page displays.
4
Enter the default login information:
●
Username is cisco
●
Default password is cisco
(passwords are case-sensitive)
5
Click Log In.
LED Functions
LED OFF
System
LINK/ACT
PoE*
Gigabit*
* Depen ding on model. Po E switches will only have a PoE LED whereas no n-PoE swi tches will have a Gigabit LED.
Cisco Business 220 Series Smart Switches | Quick Star t Guide
GREEN
STE ADY
Switch has acquired an IP
address through DHCP or a
static IP address has been
manually congured.
Link between corresponding
port and another device
detected.
1000Mbps link is established.
GREEN
FLASHING
Booting, performing self-tests,
acquiring IP address, or factory
default IP address is being used.
Port is passing trac.
AMBER
Flashing,
hardware failure detected.
Steady
Power is being supplied
to a device connected to
the port.
Switch is powered o.
Link down.
Power is not being supplied
or nothing is connected to
the port.
Connection speed is under
1000Mbps or nothing is
connected to the port.
You are now ready to congure the switch. Refer to the Administration Guide for further information.
Mounting
For detailed mounting instructions, please see the “Get Support” section.
Get Support
For Cisco support and additional documentation, including mounting instructions and the
Administration Guide, visit https://cisco.com/go/cbs220.
©2021 Cisco an d/or its al iates. Al l rights r eserve d. Cisco a nd the Cis co logo ar e tradem arks or re gistere d tradem arks of Ci sco and/or it s aliat es in the U.S. a nd other c ountrie s.
To view a list of Ci sco trad emarks , go to this U RL: http s:// www.cisco .com/go/tra demar ks. Third-p arty t radema rks ment ioned ar e the prop erty of t heir res pectiv e owners.
The use of t he word par tner does not imp ly a part nersh ip relati onship b etween C isco and a ny other co mpany. (1110R)