Cisco C1111-4P Product Data Sheet

Cisco 1000 Series Integrated

Data sheet

Cisco public

Services Routers

© 2019 Cisco and/or its affiliates. All rights reserved. Page 1 of 31

Contents

Primary features and benefits 3

Platform architecture and capabilities 5

Product specifications 8

System specifications 15

Cisco IOS Software licensing and packaging 23

For more information 29

Cisco and partner services 30

Ordering information 30

Cisco environmental sustainability 30

Cisco Capital 30

Document History 31

© 2019 Cisco and/or its affiliates. All rights reserved. Page 2 of 31

Cisco® 1000 Series Integrated Services Routers (ISRs) with Cisco IOS® XE Software combine Internet
access, comprehensive security, and wireless services (LTE Advanced 3.0 wireless WAN and 802.11ac
wireless LAN) in a single, high-performance device. The routers are easy to deploy and manage, with
separate data and control plane capabilities.

The Cisco 1000 Series ISRs are well suited for deployment as Customer Premises Equipment (CPE) in enterprise branch
offices, in service provider managed environments as well as smaller form factor and M2M use cases.

Note: Not all 1000 series SKU variants are available in every region with different technologies (check on CCW pricelist

for your region).

Figure 1.

Cisco 1000 Product Family Series

Figure 2.

Cisco 1100-8P ISR with LTE advanced, back and front view

Figure 3.

Cisco 1120 and 1160 with LTE pluggable and 802.11ac Wi-Fi options

Primary features and benefits

Table 1. Business benefits

© 2019 Cisco and/or its affiliates. All rights reserved. Page 3 of 31

Business need

Features/description

Lightweight, compact size with low power
consumption

● Can be deployed in many different environments where space, heat dissipation, and low power

consumption are critical factors (Including Cisco Pluggable smaller form factor technology).

High performance to run concurrent services

● High performance allows customers to take advantage of broadband network speeds while

running secure, concurrent data, voice, video, and wireless services. C1160 models will have
better overall performance.

High availability and business continuity

● Redundant WAN connections for failover protection and load balancing.

● Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot

Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP).

Consistent, high application performance
levels

● The router can run multiple services simultaneously with minimal performance degradation.

Risk mitigation with multilevel security

● Network perimeter security with integrated application inspection firewall.

● Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES), and

Advanced Encryption Standard (AES) encryption.

● High-performance VPNs: DMVPN, FlexVPN, GETVPN.

● Encrypted Traffic Analytics (ETA) to identify malware communications in encrypted traffic using

passive monitoring, extraction of relevant data elements, and supervised machine learning with
cloud-based global visibility.

● Cisco Umbrella

™

is a cloud security platform that provides the first line of defense against threats

on the internet wherever users go.

● Security hardware acceleration.

● Trustworthy systems with Field-Programmable Gate Array (FPGA) and hardware anchor.

Unified control of wired and wireless networks
from a common console for streamlined
operations

● Simplifies and centralizes configuration and management of wireless and wireline devices.

Supports WLAN services without requiring a wireless LAN controller.

● Supports Mobility Express for WLAN-enabled routers.

Remote configuration and management to
keep local IT staff lean

● Supports separate console and USB ports. Can be configured to work with optional USB token.

● Supports TR-069.

Performance

● Throughput

● Service reliability

● ISR 1000 can provide encrypted traffic performance greater than 350 Mbps.

● A distributed multicore architecture with the dedicated control plane and service plane.

● Remote installation of application-aware services that run identically to their counterparts in

dedicated appliances (Future roadmap).

Lower WAN expenditures

● Cisco Software-Defined WAN (SD-WAN) support for optimized WAN connection.

● Smaller form factor and Cisco Pluggable technology provide additional protection investment

and flexibility.

Pay as you grow: IPsec performance upgrade
model

● Router IPsec capacity can be increased with a remote performance-on-demand license upgrade

(no hardware upgrade) for exceptional savings and CapEx budget management.

IT consolidation, space savings, and improved
Total Cost of Ownership (TCO)

● Single converged branch platform integrates routing, switching, security, and performance

management capabilities.

Business continuity and increased resiliency

● The entire 1000 Series supports Power over Ethernet (PoE) and PoE+ power to endpoints (Not

available on C1101 and C1109 smaller form factor series).

Table 2. Support for Software-Defined WAN on ISR 1000

Cisco SD-WAN offers an entirely new way to manage and operate your WAN infrastructure. Cisco SDWAN is a cloud
delivered architecture that offers secure, flexible and rich services with the following key benefits:

© 2019 Cisco and/or its affiliates. All rights reserved. Page 4 of 31

Cisco SD-WAN

Cisco SD-WAN capability can be enabled on ISR 1000 platform

Better user experience

● The ability to deploy applications in minutes, on any platform, with a consistent user experience. Deliver predictable

performance for applications residing in the data center or in the cloud.

Greater agility

● Faster, easier deployment and operation of your WAN, and get faster performance using less bandwidth. Add new

revenue generating services in minutes not months.

Advanced threat protection

● Securely connect your users to applications in minutes and protect your data from the WAN edge to the cloud. Secure

segmentation for critical assets and multi-layer, robust security that encrypts all data.

Architectural feature

Benefits/description

Multicore processors

● High-performance multicore processors support high-speed WAN connections. The data plane uses a flow processor

that delivers Application-Specific Integrated Circuit (ASIC)-like performance that does not degrade as services are
added.

Embedded IPsec VPN
hardware acceleration

● Increases scalability when combined with an optional Cisco IOS XE Software Security license, enables WAN link security

and VPN services.

Integrated Gigabit
Ethernet ports

● Provides up to 10 built-in 10/100/1000 Ethernet ports for WAN or LAN (1100-8P: 2 WAN and 8 LAN ports, 1100-4P: 2

WAN and 4 LAN ports, 1101-4P: 1WAN and 4 LAN ports, 1109-2P M2M: 1 WAN and 2 LAN ports, and 1109-4P M2M: 1
WAN and 4 LAN).

● All 1100-8P and 1100-4P platforms model have one 10/100/1000 Ethernet port that can support Small Form-Factor

Pluggable (SFP)-based connectivity in addition to RJ-45 connections, enabling fiber or copper connectivity.

● Depending on the platform, PoE/PoE+ can be enabled on Gigabit Ethernet interfaces (4 PoE or 2 PoE+ ports on the

1100-8P and 2 PoE or 1 PoE+ ports on the 1100-4P), to provide power to external devices such as video endpoints and

802.11ac access points (Not available on C1101 and C1109 M2M smaller form factor models).

● Smaller form factor 1101-4P and 1109-4P with Cisco WAN LTE Pluggable technology option. Additional WAN options

such as Cisco 12:1 High Speed Serial Pluggable.

USB-based console access

● A type B micro USB console port supports management connectivity when traditional serial ports are not available.

Traditional console port is also available on selected models.

Optional PoE upgrade

● An optional upgrade to enable PoE capabilities on the integrated ethernet switch modules is available.

● PoE is not supported on 1101 and 1109.

IOS XE SD-WAN software enables important steps towards Intent Based Networking for WAN, i.e.

●

Centralized management and operational simplicity

●

Secure connectivity on the hybrid WAN

●

Optimized access to SaaS and Public Cloud

●

Predictable Application Quality of Experience with policy-based automation

Platform architecture and capabilities

Table 3. Architectural highlights

© 2019 Cisco and/or its affiliates. All rights reserved. Page 5 of 31

Architectural feature

Benefits/description

Flash memory support

● The 1000 Series ship with a fixed 4GB or 8GB flash memory depending on the models selected.

● Type A USB 3.0 ports provide capabilities for convenient storage.

DRAM

● The 1000 Series comes with 4 GB or 8GB fixed DRAM depending on the models selected. The C1111, C1120, C1160

series have an option to include an 8 GB fixed DRAM for advanced SD-WAN security features.

Operational phase

Application

Description

Cloud management user
interface

vManage

● vManage provides a single cloud-based console to manage your network and

SD-WAN security for faster deployments with automated provisioning and
app assurance.

Device staging and
configuration

WebUI

● A GUI-based device-management tool for Cisco IOS and Cisco IOS XE

Software-based access routers. This tool simplifies routing, firewall, VPN,
unified communications, and WAN and LAN configuration through easy-to­use wizards.

Networkwide deployment,
configuration, monitoring, and
troubleshooting

Cisco Prime® Infrastructure

● Offers comprehensive lifecycle management of wired and wireless access,

campus, and branch-office networks; rich visibility into enduser connectivity;
and application performance assurance.

● Provides wired lifecycle functions such as inventory, configuration, and image

management; automated deployment; compliance reporting; integrated best
practices; and reporting.

Context-aware security
configuration and monitoring

Cisco Prime Security

Manager

● Management tool for configuring and managing context-aware security. The

application supports both single- and multidevice manager form factors.

● Provides the ability to write and enforce granular context-aware security

policies.

Digitalized applications to
become inherently network­aware and

Application Policy

Infrastructure Controller

Enterprise Module

Cisco Digital Network

Architecture (Cisco DNA
Center) with

APIC-EM

● Cisco DNA centers around a network infrastructure that is not only fully

programmable and open to third–party innovation, but can also fully and
seamlessly integrates the cloud as an infrastructure component.

● The Cisco DNA controller factilitatest simple, automated and programmatic

deployment of network services. It brings the notion of user–and application–
aware policies into the foreground of network operations.

● With Cisco DNA, the network can provide continuous feedback to simplify

and optimize network operations.

● Automate network configuration and setup APIC-EM is a central part of Cisco

Digital Network Architecture. It delivers software-defined networking to the
enterprise branch, campus, and WAN.

Feature

Description

Cisco IOS Embedded Event Manager
(EEM)

● A distributed and customized approach to event detection and recovery.

● Offers the ability to monitor events and take informational, corrective, or any desired EEM.

● Action when the monitored events occur or when a threshold is reached.

Cisco IOS XE IP Service-Level Agreements
(IP SLAs)

● Helps assure the performance of new business-critical IP applications as well as IP services that use

data and voice in an IP network.

Table 4. Network management solutions

Table 5. Embedded management capabilities

© 2019 Cisco and/or its affiliates. All rights reserved. Page 6 of 31

Feature

Description

Simple Network Management Protocol
(SNMP), Remote Monitoring (RMON),

syslog, NetFlow, IP Flow Information

Export (IPFix)

● Network monitoring and accounting tools. Enhanced 3G MIB with 4G MIB extension.

LTE network management and
diagnostics

● In-band and out-of-band management using Telnet (Cisco IOS XE Software Command Line Interface

[CLI]) and SNMP, including MIB II and other extensions. Industry-standard LTE diagnostics and
monitoring tools (Qualcomm CDMA Air Interface Tester [CAIT] and Spirent Universal Diagnostic
Monitor [UDM]).

Feature

Description

Protocols

IPv4, IPv6, static routes, Routing Information Protocol Versions 1 and 2 (RIP and RIPv2), Open Shortest Path
First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Border Gateway Protocol (BGP), BGP
Router Reflector, Intermediate System-to-Intermediate System (IS-IS), Multicast Internet Group
Management Protocol Version 3 (IGMPv3), Protocol Independent Multicast Sparse Mode (PIM SM), PIM
Source-Specific Multicast (SSM), Resource Reservation Protocol (RSVP), Cisco Discovery Protocol,
Encapsulated Remote Switched Port Analyzer (ERSPAN), Cisco IOS IP Service-Level Agreements (IPSLA), Call
Home, Cisco IOS Embedded Event Manager (EEM), Internet Key Exchange (IKE), Access Control Lists (ACL),
Ethernet Virtual Connections (EVC), Dynamic Host Configuration Protocol (DHCP), Frame Relay (FR), DNS,
Locator ID Separation Protocol (LISP), Hot Standby Router Protocol (HSRP), RADIUS, Authentication,
Authorization, and Accounting (AAA), Application Visibility and Control (AVC), Distance Vector Multicast
Routing Protocol (DVMRP), IPv4-to-IPv6 Multicast, Multiprotocol Label Switching (MPLS), Layer 2 and Layer
3 VPN, IPsec, Layer 2 Tunneling Protocol Version 3 (L2TPv3), Bidirectional Forwarding Detection (BFD), IEEE

802.1ag, and IEEE 802.3ah.

Encapsulations

Generic Routing Encapsulation (GRE), Ethernet, 802.1q VLAN, Point-to-Point Protocol (PPP), Multilink Point­to-Point Protocol (MLPPP), Frame Relay, Multilink Frame Relay (MLFR) (FR.15 and FR.16), High-Level Data
Link Control (HDLC), Serial (RS-232, RS-449, X.21, V.35, and EIA-530), and PPP over Ethernet (PPPoE).

Traffic management

Quality of Service (QoS), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection
(WRED), Hierarchical QoS, Policy-Based Routing (PBR), Performance Routing (PfR), and Network-Based
Application Recognition (NBAR).

Cryptographic algorithms

Encryption: DES, 3DES, AES-128 or AES-256 (in CBC and GCM modes).

Authentication: RSA (748/1024/2048 bit), ECDSA (256/384 bit); Integrity: MD5, SHA, SHA-256, SHA-384, SHA-

512.

Table 6. Software features and protocols

© 2019 Cisco and/or its affiliates. All rights reserved. Page 7 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated
Micro USB
console

Pluggables

GE

GE/SFP
combo

ADSL2/VD
SL2 + or
G.FAST or
G.SHDSL

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

C1101-4P

1

NA

NA

NA

NA

NA 4 NA

NA

Yes

CAT4 LTE
Dongle

C1109-2PLTEVZ

1

NA

NA

NA

NA

NA 2 NA

NA

Yes

Embedded
builtin same
CAT4 LTE
technology as P­LTE-VZ

C1109-2PLTEUS

1

NA

NA

NA

NA

NA 2 NA

NA

Yes

Embedded
builtin same
CAT4 LTE
technology as P­LTE-US

C1109-2PLTEGB

1

NA

NA

NA

NA

NA 2 NA

NA

Yes

Embedded
builtin same
CAT4 LTE
technology as P­LTE-GB

C1109-4PLTE2P

1

NA

NA

Yes with
Pluggable
Technology

NA

NA 4 NA

NA

Yes

Yes
(CAT4/CAT6),

Dual

Pluggables,
Single P-1T
Serial in Slot 0

C1111-8P (C1111X­8P with 8 GB
memory and flash
for SD-WAN
Advanced Security
support)

1 1 NA

NA

NA

NA 8 4 2 Yes

NA

C1111-4P

1 1 NA

NA

NA

NA 4 2 1 Yes

NA

C1112-8P

NA 1 1 G.FAST
(Annex B)

NA

NA

NA 8 4 2 Yes

NA

C1113-8P

NA 1 1 G.FAST
(Annex A)

NA

NA

NA 8 4 2 Yes

NA

C1113-8PM

NA 1 1 G.FAST
(Annex M)

NA

NA

NA 8 4 2 Yes

NA

Product specifications

Table 7. Cisco 1000 Series ISRs DSL and LTE SKUs

© 2019 Cisco and/or its affiliates. All rights reserved. Page 8 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated
Micro USB
console

Pluggables

GE

GE/SFP
combo

ADSL2/VD
SL2 + or
G.FAST or
G.SHDSL

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

C1116-4P

NA 1 1 VA-DSL
(Annex B/J)

NA

NA

NA 4 2 1 Yes

NA

C1117-4P

NA 1 1 VA-DSL
(Annex A)

NA

NA

NA 4 2 1 Yes

NA

C1117-4PM

NA 1 1 VA-DSL
(Annex M)

NA

NA

NA 4 2 1 Yes

NA

C1101-4PLTEP

1

NA

NA

Yes with
Pluggable
Technology

NA

NA 4 NA

NA

Yes

Yes
(CAT4/CAT6),

or Single P-1T
Serial

C1111-8PLTEEA

1 1 NA

1 EMEAR
and North
America

NA

NA 8 4 2 Yes

NA

C1111-8PLTELA

1 1 NA

1 LATAM
and APAC

NA

NA 8 4 2 Yes

NA

C1111-4PLTEEA

1 1 NA

1 EMEAR
and North
America

NA

NA 4 2 1 Yes

NA

C1111-4PLTELA

1 1 NA

1 LATAM
and APAC

NA

NA 4 2 1 Yes

NA

C1112-8PLTEEA

NA 1 1 G.FAST
(Annex B)

1 EMEAR
and North
America

NA

NA 8 4 2 Yes

NA

C1113-8PLTEEA

NA 1 1 G.FAST
(Annex A)

1 EMEAR
and North
America

NA

NA 8 4 2 Yes

NA

C1113-8PLTELA

NA 1 1 G.FAST
(Annex A)

1 LATAM
and APAC

NA

NA 8 4 2 Yes

NA

C1113-8PMLTEEA

NA 1 1 G.FAST
(Annex M)

1 EMEAR
and North
America

NA

NA 8 4 2 Yes

NA

C1116-4PLTEEA

NA 1 1
ADSL2/VDS
L2 + (Annex
B/J)

1 EMEAR
and North
America

NA

NA 4 2 1 Yes

NA

C1117-4PLTEEA

NA 1 1
ADSL2/VDS
L2 + (Annex
A)

1 EMEAR
and North
America

NA

NA 4 2 1 Yes

NA

C1117-4PLTELA

NA 1 1
ADSL2/VDS

1 LATAM
and APAC

NA

NA 4 2 1 Yes

NA

© 2019 Cisco and/or its affiliates. All rights reserved. Page 9 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated
Micro USB
console

Pluggables

GE

GE/SFP
combo

ADSL2/VD
SL2 + or
G.FAST or
G.SHDSL

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

L2 + (Annex
A)

C1117-4PMLTEEA

NA 1 1
ADSL2/VDS
L2 + (Annex
M)

1 EMEAR
and North
America

NA

NA 4 2 1 Yes

NA

C1118-8P

NA 1 1 G.SHDSL

NA

NA

NA 8 4 2 Yes

NA

C1121-4P

1 1 NA

NA

NA

NA 4 2 1 Yes

CAT4 LTE
Dongle

C1121-4PLTEP

1 1 NA

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 4 2 1 Yes

Yes (All)

C1121-8P

(C1121X-8P with 8
GB memory and
flash for SD-WAN
Advanced Security
support)

1 1 NA

NA

NA

NA 8 4 2 Yes

CAT4 LTE
Dongle

C1121-8PLTEP

(C1121X-8PLTEP
with 8 GB memory
and flash for SD­WAN Advanced
Security support)

1 1 NA

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 8 4 2 Yes

Yes (All)

C1126-8PLTEP

(C1126X-8PLTEP
with 8 GB memory
and flash for SD­WAN Advanced
Security support)

NA 1 1
ADSL2/VDS
L2 + (Annex
B/J)

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 8 4 2 Yes

Yes (All)

C1127-8PLTEP

(C1127X-8PLTEP
with 8 GB memory
and flash for SD­WAN Advanced
Security support)

NA 1 1
ADSL2/VDS
L2 + (Annex
A)

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 8 4 2 Yes

Yes (All)

C1127-8PMLTEP

(C1127X-8PMLTEP
with 8 GB memory
and flash for SD­WAN Advanced
Security support)

NA 1 ADSL2/VDS
L2 + (Annex
M)

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 8 4 2 Yes

Yes (All)

© 2019 Cisco and/or its affiliates. All rights reserved. Page 10 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated
Micro USB
console

Pluggables

GE

GE/SFP
combo

ADSL2/VD
SL2 + or
G.FAST or
G.SHDSL

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

C1128-8PLTEP

NA 1 G.SHDL

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 8 4 2 Yes

Yes (All)

C1161-8P

(C1161X-8P with 8
GB memory and
flash for SD-WAN
Advanced Security
support)

1 1 NA

NA

NA

NA 8 4 2 Yes

CAT4 LTE
Dongle

C1161-8PLTEP

(C1161X-8PLTEP
with 8 GB memory
and flash for SD­WAN Advanced
Security support)

1 1 NA

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolog
y

NA 8 4 2 Yes

Yes (All)

Model

WAN

Wi-Fi

LAN switch

Integrated USB

3.0 console

Pluggable

GE

GE/SFP
combo

ADSL2/
VDSL2+

LTE Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

C1109­4PLTE2PWZ

***

1

NA

NA

Yes with
Pluggable
Technology

NA

2X2
MIMO

4

NA

NA

Yes

Yes (CAT4/CAT6),
Dual Pluggables,

Single P-1T Serial in
Slot 0

C1111­8PWY*

1 1 NA

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1111­4PWX**

1 1 NA

NA

NA

2X2
MIMO

4

2

1

Yes

NA

Table 8. Cisco 1000 Series ISRs DSL and Wi-Fi SKUs

© 2019 Cisco and/or its affiliates. All rights reserved. Page 11 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated USB

3.0 console

Pluggable

GE

GE/SFP
combo

ADSL2/
VDSL2+

LTE Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

C1112-8PWE

NA 1 1
G.FAST
(Annex B
)

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1113-8PWA

NA 1 1
G.FAST
(Annex A
)

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1113-8PWB

NA 1 1
G.FAST
(Annex A
)

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1113-8PWE

NA 1 1
G.FAST
(Annex A
)

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1113-8PWZ

NA 1 1
G.FAST
(Annex A
)

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1113­8PMWE

NA 1 1
G.FAST
(Annex
M)

NA

NA

2X2
MIMO

8

4

2

Yes

NA

C1116-4PWE

NA 1 1
ADSL2/V
DSL2+

(ISDN)
Annex
B/J

NA

NA

2X2
MIMO

4

2

1

Yes

NA

C1117-4PWE

NA 1 1
ADSL2/V
DSL2+

(POTS)
Annex A

NA

NA

2X2
MIMO

4 2 1

Yes

NA

C1117-4PWA

NA 1 1
ADSL2/V
DSL2+

(POTS)
Annex A

NA

NA

2X2
MIMO

4 2 1

Yes

NA

© 2019 Cisco and/or its affiliates. All rights reserved. Page 12 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated USB

3.0 console

Pluggable

GE

GE/SFP
combo

ADSL2/
VDSL2+

LTE Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11
ac

GE

PoE or
PoE+

C1117-4PWZ

NA 1 1
ADSL2/V
DSL2+

(POTS)
Annex A

NA

NA

2X2
MIMO

4 2 1

Yes

NA

C1117­4PMWE

NA 1 1
ADSL2/V
DSL2+

(POTS)
Annex M

NA

NA

2X2
MIMO

4 2 1

Yes

NA

Model

WAN

Wi-Fi

LAN switch

Integrated
USB 3.0
console

Pluggable

GE

GE/SFP
combo

ADSL2/V
DSL2+

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11ac

GE

PoE or
PoE+

C1111­8PLTEEAWX*

1 1 NA

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

8 4 2

Yes

NA

C1111­8PLTELAWY**

1 1 NA

1 LATAM
and APAC

NA

2X2 MIMO

8 4 2

Yes

NA

C1112­8PLTEEAWE

NA 1 1 G.FAST
(Annex B)

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

8 4 2

Yes

NA

C1113­8PLTEEAWA

NA 1 1 G.FAST
(Annex
A)

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

8 4 2

Yes

NA

C1113­8PLTEEAWB

NA 1 1 G.FAST
(Annex
A)

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

8 4 2

Yes

NA

C1113­8PLTEEAWE

NA 1 1 G.FAST
(Annex

1 EMEAR
and
North Ameri

NA

2X2 MIMO

8 4 2

Yes

NA

*

Wi-Fi domain WY; Y = A, B, E, F, H, N, Q, R, Z (S will be available with IOX XE 16.9 or later releases starting January, 2019)

**

Wi-Fi domain WX; X = A, B, D, E, F, H, N, Q, R, Z

***

Wi-Fi domain WZ; Z = A, B, D, E, Q, R, Z

Cisco WLAN Country Compliance Lookup https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html.

Table 9. Cisco 1000 Series ISRs LTE, Wi-Fi, and DSL SKUs

© 2019 Cisco and/or its affiliates. All rights reserved. Page 13 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated
USB 3.0
console

Pluggable

GE

GE/SFP
combo

ADSL2/V
DSL2+

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11ac

GE

PoE or
PoE+

A)

ca

C1113­8PLTELAWZ

NA 1 1 G.FAST
(Annex
A)

1 LATAM
and APAC

NA

2X2 MIMO

8 4 2

Yes

NA

C1116­4PLTEEAWE

NA 1 1
ADSL2/V
DSL2+
(ISDN)
Annex
B/J

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

4 2 1

Yes

NA

C1117­4PLTEEAWE

NA 1 1
ADSL2/V
DSL2+
(POTS)
Annex A

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

4 2 1

Yes

NA

C1117­4PLTEEAWA

NA 1 1
ADSL2/V
DSL2+
(POTS)
Annex A

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

4 2 1

Yes

NA

C1117­4PLTELAWZ

NA 1 1
ADSL2/V
DSL2+
(POTS)
Annex A

1 LATAM
and APAC

NA

2X2 MIMO

4 2 1

Yes

NA

C1117­4PMLTEEAWE

NA 1 1
ADSL2/V
DSL2+

(POTS)
Annex M

1 EMEAR
and
North Ameri
ca

NA

2X2 MIMO

4 2 1

Yes

NA

C1101­4PLTEPWX

***

1

NA

NA

Yes with
Pluggable
Technology

NA

2X2 MIMO

4

NA

NA

Yes

Yes (CAT4/CAT6),

or Single P-1T
Serial

© 2019 Cisco and/or its affiliates. All rights reserved. Page 14 of 31

Model

WAN

Wi-Fi

LAN switch

Integrated
USB 3.0
console

Pluggable

GE

GE/SFP
combo

ADSL2/V
DSL2+

LTE
Advanced
(CAT6)

LTE Adv.
Pro
(CAT18)

802.11ac

GE

PoE or
PoE+

C1121­8PLTEPWX*

(C1121X­8PLTEPWY*
with 8 GB
memory and
flash for SD­WAN Advanced
Security
support)

1 1 NA

Yes with
Pluggable
Technology

Yes with
Pluggable
Technolo
gy

2X2 MIMO

8 4 2

Yes

Yes (All)

Region or theater

Cisco LTE 2.5 for P-LTE-VZ

Cisco LTE 2.5 for P-LTE-US

Cisco LTE 2.5 for P-LTE-GB

Bands

LTE bands 4, 13.

FDD LTE 700 MHz (band 13), 1700
MHz and 2100 MHz (band 4
AWS).

LTE bands 2, 4, 5, 12.

FDD LTE 700 MHz (band 17), 700
MHz (band 12), 850 MHz (band 5
CLR), 1700 MHz and 2100 MHz
(band 4 AWS).

LTE bands 1, 3, 7, 8, 20, 28.

FDD LTE 700 MHz (band 28), 800
MHz (band 20), 900 MHz (band

8), 1800 MHz (band 3), 2100 MHz
(band 1), and 2600 MHz (band 7).

Theoretical Category 4
download/upload speeds

150 Mbps/50 Mbps

150 Mbps/50 Mbps

150 Mbps/50 Mbps

United States

● Verizon

● ATT and T-Mobile

Europe

●

C1111-8PLTEEAWX*

*

Wi-Fi domain WX; X = A, B, E, R

C1111-8PLTELAWY**

**

Wi-Fi domain WY; Y = D, F, H, N, Q, Z (S, E and A will be available with IOX XE 16.9 or later releases starting January, 2019)

C1101-4PLTEPWX

***

Wi-Fi domain WX; X = A, B, D, E, Z

***

C1121-8PLTEPWX*

*

Wi-Fi domain WX; X = B, E, Z, Q

C1121X-8PLTEPWY**

**

Wi-Fi domain WY; Y = A, E, B, Z

Cisco WLAN Country Compliance Lookup https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html.

System specifications

Table 10. LTE (3GPP Category 4) pluggable bands supported

© 2019 Cisco and/or its affiliates. All rights reserved. Page 15 of 31

Region or theater

Cisco LTE 2.5 for D-LTE-GB

Cisco LTE 2.5 for D-LTE-AS

Cisco LTE 2.5 for D-LTE-NA

Bands

*

LTE bands 1,3,7,8,20,28

*

LTE bands 1,3,5,8,40,41

*

LTE band 2,4,5,12,13,14,17

Theoretical Category 4
download/upload speeds

75 Mbps/50 Mbps

75 Mbps/50 Mbps

75 Mbps/50 Mbps

United States

●

Europe

●

India

●

China

●

Indonesia

●

Malaysia

●

Philippines

●

South Africa

●

Region or theater

Cisco LTE Advanced 3.0 LTEEA (Category 6)

Cisco LTE Advanced 3.0 LTELA (Category 6)

Bands

LTE bands 1-5, 7, 12, 13, 20, 25, 26, 29, 30, and 41.

FDD LTE 700 MHz (band 12), 700 MHz (band 29), 800
MHz (band 20), 850 MHz (band 5 CLR), 850 MHz
(band 26 Low), 900 MHz (band 8), 1800 MHz (band 3),
1900 MHz (band 2), 1900 MHz (PCS band 25), 1700
MHz and 2100 MHz (band 4 AWS), 2100 MHz (band

1), 2300 MHz (band 30), or 2600 MHz (band 7).

TDD LTE 2500 MHz (band 41).

Carrier aggregation band combinations:

1+8; 2+(2,5,12,13,29); 3+(7,20); 4+(4,5,12,13,29);
7+(7,20); 12+30, 5+30, and 41+41.

LTE bands 1, 3, 5, 7, 8, 18, 19, 21, 28, 38, 39, 40, and

41.

FDD LTE 700 MHz (band 28), 850 MHz (band 5
CLR), 850 MHz (bands 18 and 19 Low), 900 MHz
(band 8), 1500 MHz (band 21), 1800 MHz (band 3),
2100 MHz (band 1), or 2600 MHz (band 7).

TDD LTE 1900 MHz (band 39), 2300 MHz (band 40),
2500 MHz (band 41), or 2600 MHz (band 38).

Carrier aggregation band combinations:

1+(8,18,19,21); 3+(5,7,19,28); 7+(5,7,28); 19+21,
38+38, 39+39,40+40, and 41+41.

Theoretical Category 6
download/upload speeds

300 Mbps/50 Mbps

300 Mbps/50 Mbps

United States

●

Europe

●

Canada

●

Middle East with specific LTE
bands/frequencies

●

Table 11. USB based LTE Dongle (3GPP Category 4) bands supported

*

Non-LTE Bands are not supported.

Table 12. LTE Advanced (3GPP Category 6) pluggable supported bands

© 2019 Cisco and/or its affiliates. All rights reserved. Page 16 of 31

Region or theater

Cisco LTE Advanced 3.0 LTEEA (Category 6)

Cisco LTE Advanced 3.0 LTELA (Category 6)

Australia and New Zealand

●

Japan

●

China

●

India

●

Southeast Asia

●

Latin America

● Dependent upon specific operators supporting the LTE

bands listed above.

South Korea

●

Region or theater

Cisco LTE Advanced Pro Pluggable P-LTEAP18-GL

Bands

LTE bands 1-5, 7, 8, 12-14, 17, 18-20, 25, 26, 28-30, 32, 38-43, 46, 48, 66, and 71.

FDD LTE 600 MHz (band 71), 700 MHz (bands 12, 13, 14, 17, 28, and 29), 800 MHz (band 20), 850
MHz (bands 5, 18, 19, and 26), 900 MHz (band 8), 1500 MHz (band 32), 1700 MHz (bands 4 and 66),
1800 MHz (band 3), 1900 MHz (bands 2 and 25), 2100 MHz (band 1), 2300 MHz (band 30), 2600
MHz (band 7).

TDD LTE 1900 MHz (band 39), 2300 MHz (band 40), 2500 MHz (band 41), 2600 MHz (band 38),
3500 MHz (bands 42 and 48), 3700 MHz (band 43), 5200 MHz (band 46).

Theoretical Category 6
download/upload speeds

1.2 Gbps/200 Mbps

United States

●

Europe

●

Canada

●

Australia and New Zealand

●

Japan

●

Table 13. LTE Advanced Pro (3GPP Category 18) pluggable supported bands

© 2019 Cisco and/or its affiliates. All rights reserved. Page 17 of 31

Item

Specification

LTE modem form factor

● Embedded (included with the router) or LTE Pluggable Technology with LTEP PIDs.

● Cisco LTE Advanced 3.0 LTEEA (CAT6) and Pluggable P-LTEA-EA SKU: FW-7455-LTE-VZ (Verizon) or FW-7455-LTE-

AT (ATT) or FW-7455-LTE-ST (Sprint) or FW-7455-LTE-BE (Bell) or FW-7455-LTERO (Rogers) or FW-7455-LTE-TE
(Telus) or FW-7455-LTE-GN (generic for T-Mobile, Europe, and Middle East) selection option.

● Cisco LTE Advanced 3.0 LTELA (CAT6) and Pluggable P-LTEA-LA SKU: FW-7430-LTE-AU (Australia) or FW-7430-

LTE-JN (Japan) or FW-7430-LTE-GN (generic) selection option.

● Cisco LTE Advanced Pro (CAT18) pluggable P-LTEAP18-GL SKU: FW-LM960-LTE-VZ (Verizon), FW-LM960-LTE-ST

(Sprint), FW-LM960-LTE-AT AT&T), FW-LM960-LTE-GN (Generic/Global) selection options.

Important LTE features

● Automatic switch failover between primary and backup link.

● Multichannel-Interface-Processor (MIP) profile configuration.

● Remotely initiated data callback using voice or Short Message Service (SMS).

● Remote firmware upgrade over LTE.

● SIM lock and unlock capabilities.

● Dying gasp available on pluggable LTE modules.

Dual SIM support

● High reliability, and cellular multihoming support for dual micro (3FF) SIMs card socket; compliant with ISO-7816-2

(SIM mechanical), Auto SIM carrier capability with correct firmware selection (Fast SIM failover).

SMS and
GPS

● GPS antenna: SMA connector (separate active GPS antenna with SMA option).

● Send and receive SMS (maximum 160 characters).

● Standalone GPS and Assisted GPS (AGPS); needs line of sight.

Modem information

Modem form factor: (M.2) EM7455 or (M.2) EM7430 series for Cisco LTE Advanced 3.0, WP7600 series for

Cisco LTE 2.5, (mPCIe) LM960 series for Cisco LTE Advanced Pro.

Wireless technologies
supported (performance and
throughput)

Cisco LTE Advanced 3.0 LTEEA and LTELA (Refer to above Table 11: LTE Advanced Bands Supported)

Backward compatibility:

● UMTS and HSPA+.

● DC-HSPA+ speed download with Category 24 (42 Mbps) and upload up to Category 8 (11.5 Mbps). LTELA supports

DC-HSPA+ band 1, 5, 6, 8, 9, 19. LTEEA supports DC-HSPA+ band 1, 2, 3, 4, 5, 8.

● TD-SCDMA 39 (LTELA China Mobile supports).

Cisco LTE 2.5 (Refer to Table 10: LTE Bands Supported) Backward compatibility:

● P-LTE-US: HSPA+ (Band 2, 4, 5).

● P-LTE-GB: UMTS, HSPA+ (Band 1, 8), EDGE, GSM, GPRS (900/1800).

Included antenna

● Two multiband swivel-mount dipole antennas (LTE-ANTM-D for CAT6 and LTE-ANTM2-SMA-D for CAT18) are

included with all Cisco LTE pluggables and 1000 Series routers. Two multiband swivel-mount dipole antennas (LTE­ANTM-SMA-D) are included with all Cisco LTE 2.5 Pluggables 1101 and 1109 Series routers.

For –N antenna and cable installation guidance, view the Connected Grid Antennas Installation Guide.

Carrier support

● For a list of carriers that offer services on the Cisco 1000 Series LTE Advanced 3.0, please visit the Wireless Carrier

Partners page.

Table 14. Cisco LTE specifications

© 2019 Cisco and/or its affiliates. All rights reserved. Page 18 of 31

Item

Specification

LTE modem form factor

● USB Based CAT4 LTE Dongle.

Important LTE features

● Automatic switch failover between primary WAN and backup LTE link and vice-versa.

● Multiple profile configuration.

● Remote firmware upgrade over LTE.

Single SIM support

● Single micro (3FF) SIMs card socket; compliant with ISO-7816-2 (SIM mechanical).

SMS and
GPS

● Send and receive SMS (maximum 160 characters).

● GPS: Not Supported.

Modem information

Modem form factor: WP7600 series for Cisco USB based CAT4 LTE Dongle.

Wireless technologies
supported (performance and
throughput)

Cisco LTE 2.5 (Refer to Table 10: LTE Bands Supported).

75Mbps (DL)/50Mbps (UL).

Included antenna

● Sub-Miniature version-A (SMA) Antenna is included with USB based CAT4 LTE Dongle.

● For Dongle installation guidance, view the Hardware Installation Guide.

Feature

Specification

Memory (default and
maximum)

DRAM: 4 GB

Only C1111X-8P,C1121X-8P,C1126X,C1127X,C1161X
models have 8GB DRAM

Flash: 4 GB

Only C1111X-8P,C1121X­8P,C1126X,C1127X,C1161X models have 8GB Flash

Console

● Micro USB console (Type A).

● RJ45.

Micro-USB port (reserved)

● Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0).

WLAN interfaces

● Multiuser Multiple-Input Multiple-Output (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2–capable

clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and

● 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as Single-User MIMO

(SU-MIMO).

● 802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO

mode, offering 867-Mbps rates for more capacity and reliability than competing access points.

● Flexible deployment through the Mobility Express solution is ideal for small to medium-sized deployments. Easy setup

allows the 1000 Series (similar to 1815i) to be deployed on networks without a physical controller.

● For more information, view the Cisco Aironet 1815i Access Point Data Sheet.

Maximum clients

● Maximum number of associated wireless clients: 200 per Wi-Fi radio; in total 400 clients per access point. C1109-4PLTEP

and C1109-4PLTEW models come with default dual W-ANTM2050D-RPSMA external antenna and all modem have
default 8.8 AP autonomous or Mobility Express release. Option to select 8.8 CAPWAP WLC image.

Table 15. Cisco USB Based Cat4 LTE specifications

Table 16. Cisco 1000 Series ISRs system specifications

© 2019 Cisco and/or its affiliates. All rights reserved. Page 19 of 31

Feature

Specification

Authentication and
security

● AES for Wi-Fi Protected Access 2 (WPA2).

● 802.1X, RADIUS AAA.

● 802.11r and 802.11i.

802.11ac

● 2x2 SU-MIMO/MU-MIMO with two spatial streams.

● Maximal Ratio Combining (MRC).

● 20-, 40-, and 80-MHz channels.

● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz).

● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx).

● 802.11 Dynamic Frequency Selection (DFS).

● Cyclic Shift Diversity (CSD) support.

Software

● Cisco IOS Software feature set: Universal Cisco IOS XE 16.6.1 Software image or later. C1112, C1113, and C1101 models

support starting with IOS XE 16.8.1 Software image or later. C1118, C1111X-8P and C1109 models support with IOS XE

16.9.1 Software image or later.

● Cisco IOS Software feature set: C1120 and C1160 models Universal Cisco IOS XE 16.11.1 Software image or later.

● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 (migration to 8.8 starting March,

2019 and 8.8 for 1101 and 1109 Models) MR1 or later.

DSL interfaces

C1116 and C1117

● Dying gasp.

● ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a.

● VDSL2 Vectoring.

● ADSL Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+).

● ADSL Annex M G.992.3 (ADSL2) and G.992.5 (ADSL2+).

C1112 and C1113

● G.FAST (spectrum up to 106MHz) Annex A, Annex B, Annex M and compatible with ADSL2/2+ and VDSL2.

● ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, 17a, and 35b.

● ITU G.9700/9701/997.2 G.FAST and supported profiles: 106a, and 106b.

C1118

● G.SHDSL.

Serial WAN interface and
protocol

● Support for both synchronous and bisync modes.

● Synchronous maximum speed of up to 8 Mbps.

● Support for bisync modes.

● Support for network clock synchronization.

● EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21.

Cisco Smart Serial Cabling

Product Number

CAB-SS-V35MT

CAB-SS-V35FC

CAB-SS-232MT

CAB-SS-232FC

CAB-SS-449MT

CAB-SS-449FC

CAB-SS-X21MT

CAB-SS-X21FC

CAB-SS-530MT

CAB-SS-530AMT

Cable Type

V.35 DTE

V.35 DCE

EIA/TIA-232 DTE

EIA/TIA-232 DCE

EIA/TIA-449 DTE

EIA/TIA-449 DCE

X.21 DTE

X.21 DCE

EIA/TIA-530 DTE

EIA/TIA-530A DTE

Length

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

10 ft (3m)

Connector Type

Male

Female

Male

Female

Male

Female

Male

Female

Male

Male

© 2019 Cisco and/or its affiliates. All rights reserved. Page 20 of 31

Feature

Specification

Male

Inline PoE

● Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af -

compliant PoE or 802.3at-compliant PoE+.

External power supply

Product power specifications:

C111X, C1120 and C1160 Models

● AC input voltage: Universal 100 to 240 VAC.

● Frequency: 50 to 60 Hz.

● Maximum output power: 66W (default).

● Output voltages: 12 VDC.

● Optional PoE and PoE+:

◦ Single 150W power supply required for Cisco 1100-8P series router
◦ Single 115W power supply required for Cisco 1100-4P series router

● External output voltage: 48 VDC.

C1101-4PLTEPWX and C1109-4PLTE2PWX Models:

● AC input voltage: Universal 100 to 240 VAC.

● Frequency: 50 to 60 Hz.

● Maximum output power: 66W (default iTemp for C1109-4PLTE2PWX Models).

● Output voltages: 12 VDC.

C1101-4P, C1101-4PLTEP,C1109-2PLTE, and C1109-4PLTE2P Models:

● AC input voltage: Universal 100 to 240 VAC.

● Frequency: 50 to 60 Hz.

● Maximum output power: 30W (default iTemp for Models).

● Output voltages: 12 VDC.

USB 3.0

● USB devices supported:

◦ USB eTokens and USB flash memory

● Devices USB 3.0 supports to be connected externally. View the USB Device Support Data Sheet.

LEDs

● WWAN (green/amber).

● SIM status (green/amber).

● Received signal strength indication (RSSI) bar (green).

● 3G/LTE service (green/amber).

● GPS (green/amber).

● Speed and link for Gigabit Ethernet WAN port (green).

● Speed and link for all Fast Ethernet LAN ports (green).

© 2019 Cisco and/or its affiliates. All rights reserved. Page 21 of 31

Feature

Specification

Physical dimensions (H x
W x D)

C111X Models

● 1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models).

● 1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models).

C1120 Models

● 1.65 x 12.7 x 8.9 in. (41.9 x 322 x 226 mm).

C1160 Models

● 1.65 x 10.8 x 7.85 in. (41.9 x 274 x 199 mm).

C1101-4PLTEP and C1101-4PLTEPWX Models

● 1.73 x 9.75 x 6.6 in. (43.9 x 247.6 x 167.6 mm) (includes rubber feet models).

C1101-4P Models

● 1.1 x 7.5 x 6.0 in. (27.9 x 190.5 x 152.4 mm) (includes rubber feet models).

C1109-2PLTE Models

● 1.27 x 8.4 x 6.0 in. (32.3 x 213.4 x 152.4mm) (includes rubber feet models).

C1109-4PLTE2P and C1109-4PLTE2PWX Models (ship default with dual W-ANTM2050DRPSMA Wi-Fi
antennae)

● 1.71 x 11.16 x 9.8 in. (43.4 x 283.5 x 248.9 mm) (includes rubber feet models).

Pluggable

● .85 x 2.5 x 3.88 in. (21.6 x 63.5 x 98.5 mm).

● USB Based CAT4 LTE Dongle 3.69 x 1.3 x 0.39 in. (93.73 x 32.99 x 10.00 mm).

Weight

C111X Models

● 1.94 lb to 4.59 lb (1.94kg to 2.08 kg).

● 4.50 lb (2.04 kg) with LTE Advanced.

● 4.76 lb (2.16 kg) with Wave 2 802.11ac Dual Radio.

● 4.89 lb (2.22 kg) with LTE Advanced plus Wave 2 802.11ac Dual Radio.

C1120 Models

● 3.43 lb (1.56Kg). base model with 4 ports.

● 3.7 lb (1.68Kg). with 4 ports and pluggable LTE.

● 4.62 lb (2.1Kg). with LTE and WiFi.

● 4.53 lb (2.06Kg). with LTE and VDSL.

● 3.7 lb (1.68Kg). with 4 ports and pluggable LTE.

C1160 Models

● 3.48 lb (1.58Kg). base model with 8 ports.

● 3.74 lb (1.7Kg). with 8 ports and pluggable LTE.

C1101-4PLTEPWX Models

● 3.78 lb (1.71kg).

C1101-4PLTEP Models

● 3.34 lb (1.51kg).

C1101-4P Models

● 1.89 lb (.86kg).

C1109-2PLTE Models

● 2.25 lb (1.02kg).

C1109-4PLTE2PWX Models (Only C1109-4PLTE2PWX have external Wi-Fi antennae options)

© 2019 Cisco and/or its affiliates. All rights reserved. Page 22 of 31

Feature

Specification

● 6.23 lb (2.83kg).

C1109-4PLTE2P Models

● 5.93 lb (2.69kg).

Pluggable

● CAT18 LM960XX.45 lb (.21kg)

● CAT6 EM74XX.44 lb (.20kg).

● CAT4 WP76XX.40 lb (.18kg).

● USB Based CAT4 LTE Dongle WP76XX 0.068 lb (0.031kg).

Standard safety
certifications

● UL 60950-1.and EN 60950-1.

● CAN/CSA C22.2 No. 60950-1.

● CB to IEC 60950-1, 2

nd

edition with all group differences and national deviations.

EMC emissions

● EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2,

EN61000-3-3, and EN61000-6-1.

EMC immunity

● EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-

386.

Radio immunity

● EN301 489-1, EN 301 489-7, and EN301 489-24.

Cellular radio

● EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24, and EN 301 908-13.

Environmental operating
range

● Nonoperating temperature: -4° to 149°F (-20° to 65°C).

● Nonoperating humidity: 5% to 95% relative humidity (noncondensing).

● Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).

● Operating temperature: 32° to 104°F (0° to 40°C). C1101 support 32° to 113°F (0° to 45°C). C1109-2PLTE support 32° to

122°F (0° to 50°C). C1109-4PLTE2P and C1109-4PLTE2PW models support -4° to 131°F (-20° to 55°C).

● Operating humidity: 10% to 85% relative humidity (noncondensing).

● Operating altitude: 0 to 10,000 ft (0 to 3000 m at 30°C). Operating altitude: 0 to 10,000 ft (0 to 3000 m at 35°C for C1109-

2PLTE models). Operating altitude: 0 to 10,000 ft (0 to 3000 m at 40°C for C1109-4PLTE2P and C1109-4PLTE2PW
models).

Cisco IOS Software licensing and packaging

Universal Cisco IOS XE Image

A single Cisco IOS XE Universal image encompassing all functions is delivered with the platform. Advanced features can
be enabled simply by activating a software license on the Universal image. Technology packages and feature licenses,
enabled through right-to-use licenses, simplify software delivery and decrease the operational costs of deploying new
features.

© 2019 Cisco and/or its affiliates. All rights reserved. Page 23 of 31

Part number

Bundles

Features

SL-1100-8P-IPB

SL-1100-4P-IPB

SL-1100-2P-IPB

IP Base (default)

Routing protocols, ACL, NAT, QoS, BFD, VRF Lite, IP SLA Responder.

SL-1100-8P-APP(=)

SL-1100-4P-APP(=)

SL-1100-2P-APP(=)

Application Experience (APP)

IP Base + advanced networking protocols: L2TPv3, MPLS.

Application Experience: PfRv3, NBAR2, AVC, IPSLA Initiator.

Hybrid Cloud Connectivity: LISP, Virtual Private LAN Services (VPLS),
Ethernet over MPLS.

Four major technology licenses are available on the Cisco 1000 Series; these licenses can be activated through the Cisco
software activation process identified at https://www.cisco.com/go/sa. The following licenses are available:

●

IP Base: This technology package is available as the default.

●

Application Experience (APP): This license includes data and application performance features.

●

Security (SEC) or Security with No Payload Encryption (SEC-NPE): This license includes features for securing
network infrastructure.

●

IP Security (IPSEC): This license includes features that improve IP security performance multifold.

The Cisco SD-WAN subscriptions are aligned across three subscription licenses of Cisco DNA Essentials, Cisco DNA
Advantage and Cisco DNA Premier, each expanding functionally. The Cisco DNA Essentials covers all types of
connectivity and router life cycle management, support for Network and application visibility coupled with basic premise
and transport security. The Cisco DNA Advantage provides for Advanced WAN topologies, Application aware policies
supported by enhanced network security. The Cisco DNA Premier provides for Cloud connectivity with unlimited
segmentation, Advanced Application optimization and Network Analytics, secured by advanced threat protection. There
are separate SD-WAN promotional PIDs or using LIC-DNA-ADD option. For Cisco ONE, there is also C1-ISR-ADD option.

Cisco CVO is now supported on 1100-8P and 1100-4P models with SEC license.

For more information on Cisco SD-WAN please refer to: https://www.cisco.com/c/en/us/products/software/one-wan-

subscription/index.html.

Table 17. Cisco 1000 Series licenses

© 2019 Cisco and/or its affiliates. All rights reserved. Page 24 of 31

Part number

Bundles

Features

SL-1100-8P-SEC(=)

SL-1100-8P-SECNPE(=)

SL-1100-4P-SEC(=)

SL-1100-4P-SECNPE(=)

SL-1100-2P-SEC(=)

SL-1100-2P-SECNPE(=)

Security (SEC)

IP Base + Advanced Security: Zone-based firewall, IPsec VPN, Dynamic
Multipoint VPN (DMVPN), FlexVPN, GETVPN.

Provides up to 50 Mbps IPsec performance. SEC license needed for
CVO deployment option.

FL-VPERF-8P-200(=)

FL-VPERF-4P-100(=)

IPSec Performance (VPERF)

IPsec Performance: Additional 100 Mbps for ISR 1100-4P and 200 Mbps
for ISR 1100-8P. Not applicable on C1109-2PLTE models.

FL-1100-8P-HSEC(=)

FL-1100-4P-HSEC(=)

FL-1100-2P-HSEC(=)

IPSec HSEC

IPSEC HSEC License for Cisco ISR 1100 8P,ISR 1100 4P, and 1100 2P.
Support with IOS XE 16.8.1 or later releases.

C1F1PISR1100S8PK9

C1F1PISR1100S4PK9

Cisco One S/W Bundle

APP, SEC, PRIME licenses (SL-1100-8P-IPB, C1-SL-11008P-APP, C1-SL­1100-8P-SEC or C1-SL-1100-8P-SECNPE, C1-PI-LFAS-ISR-K9,
C1F1VISR1100S8P-01, C1-SL-1100-PAK) or (SL-1100-4P-IPB, C1-SL­1100-4P-APP, C1-SL1100-4P-SEC or C1-SL-1100-4P-SECNPE, C1-PI­LFASISR-K9, C1F1VISR1100S4P-01, C1-SL-1100-PAK). Cisco ONE
selection option can also be order with separate SWSS PID under C1­ISR-ADD.

Product part number

Description

Router software images

SISR1100UK9-166(=)

SISR1100NPEUK9-166(=)

SISR1100UK9-168(=)

SISR1100NPEUK9-168(=)

SISR1100UK9-169(=)

SISR1100NPEUK9-169(=)

SISR1100UK9-1610(=)

SISR11NPEUK9-1610(=)

SISR1100UK9-1611(=)

SISR11NPEUK9-1611(=)

Cisco 1100 ISR Universal Image and Non-Pay load Encryptions Image.

Table 18. Product part numbers and software images

© 2019 Cisco and/or its affiliates. All rights reserved. Page 25 of 31

Product part number

Description

SD-WAN image

SISR1100UCMK9-169(=)

SISR1100UCMK9-1610(=)

SISR1100UCMK9-1611(=)

SD-WAN Image for ISR 1100 platforms. Some models with –DNA value, –SPM promotional PIDs or
certain models with separate LIC-DNA-ADD (or L-LIC-DNA-ADD) option.

Access point software images

AIR-AP1815-K9-ME-8-8-110-

0.tar

Cisco 111X Models AP delivers industry-leading wireless performance with support for the latest Wi-Fi
standard, IEEE’s 802.11ac Wave 2 and Mobility Express.

DSL firmware options

A2pvbF039t.d26d

Annex A and M.

B2pv6F039g1.d26d

Annex B and J.

A2pvfbH043j

G.FAST Annex A and M.

B2pvfbH043j

G.FAST Annex B.

Power over Ethernet options

ISR-1100-POE2(=)

1100-4P with 115W PSU (2 PoE or 1 PoE+).

ISR-1100-POE4(=)

1100-8P with 150W PSU (4 PoE or 2 PoE+).

Rack mount kit and RJ Console Adapter

ACS-1100-RM-19(=)

Rack-mount kit for all 111X Series ISRs.

ACS-1100-RM2-19(=)

Rack-mount kit for 112X and 116X Series ISRs.

CAB-CON-USBRJ45(=)

Micro USB to RJ45 Console Adapter (Only for 1101 and 1109 Models).

Pluggable

P-LTEAP18-GL(=)

System and spare CAT18 LTE Advanced Pro Pluggable for North America, Europe and APJC.

P-LTEA-EA(=)

System and spare CAT6 LTE Advanced Pluggable for North American and Europe.

P-LTEA-LA(=)

System and spare CAT6 LTE Advanced Pluggable for APAC, ANZ, and LATAM.

P-LTE-VZ(=)

System and spare CAT4 LTE Pluggable for Verizon. Single SIM slot. Spare need antenna selection option.

P-LTE-US(=)

System and spare CAT4 LTE Pluggable for ATT and T-Mobile. Spare need antenna selection option.

P-LTE-GB(=)

System and spare CAT4 LTE Pluggable for Europe. Spare need antenna selection option.

D-LTE-GB(=)

System and spare USB Based CAT4 LTE Pluggable for EMEAR.

© 2019 Cisco and/or its affiliates. All rights reserved. Page 26 of 31

Product part number

Description

D-LTE-AS(=)

System and spare USB Based CAT4 LTE Pluggable for India, China, Hong Kong, Indonesia, Malaysia,
Philippines, South Africa.

D-LTE-NA(=)

System and spare USB Based CAT4 LTE Pluggable for North America.

D-MHLD(=)

System and spare Magnetic Holder for USB based CAT4 LTE Dongle.

P-1T(=)

System and spare Cisco 12:1 High Speed serial WAN interface (sync and bisync).

P-BLANK(=)

System and spare blank Pluggable.

Small Form-Factor Pluggable

ISR 1100 8P

ISR 1100 4P

Description

GLC-EX-SMD

Yes

Yes

1000BASE-EX SFP transceiver module, SMF, 1310nm, DOM.

GLC-LH-SM

Yes

Yes

GE SFP, LC connector LX/LH transceiver.

GLC-LH-SMD

Yes

Yes

GE SFP, LC connector LX/LH transceiver; with DOM.

GLC-SX-MM

Yes

Yes

GE SFP, LC connector SX transceiver.

GLC-SX-MMD

Yes

Yes

GE SFP, LC connector SX transceiver; with DOM.

GLC-ZX-SM

Yes

Yes

1000BASE-ZX SFP.

GLC-ZX-SMD

Yes

Yes

1000BASE-ZX SFP; with DOM.

GLC-FE-100FX

Yes

Yes

100BASE-FX SFP for FE port.

GLC-FE-100LX

Yes

Yes

100BASE-LX SFP for FE port.

GLC-FE-100ZX

Yes

Yes

100BASE-ZX SFP (80km).

GLC-FE-100EX

Yes

Yes

100BASE-EX SFP (40km).

GLC-FE-100BX-D

Yes

Yes

100BASE-BX10-D SFP.

GLC-FE-100BX-U

Yes

Yes

100BASE-BX10-U SFP.

GLC-GE-100FX

Yes

Yes

100FX SFP on GE ports.

GLC-BX80-D-I

Yes

Yes

1000BASE-BX80 SFP, 1570NM.

GLC-BX80-U-I

Yes

Yes

1000BASE-BX80 SFP, 1490NM.

GLC-BX40-D-I

Yes

Yes

1000BASE-BX40 SFP, 1550NM.

GLC-BX40-U-I

Yes

Yes

1000BASE-BX40 SFP, 1310NM.

GLC-BX-D

Yes

Yes

1000BASE-BX SFP, 1490NM.

GLC-BX-U

Yes

Yes

1000BASE-BX SFP, 1310NM.

© 2019 Cisco and/or its affiliates. All rights reserved. Page 27 of 31

Small Form-Factor Pluggable

ISR 1100 8P

ISR 1100 4P

Description

GLC-TE

Yes

Yes

10/100/1000BASE-T.

GLC-T

Yes

Yes

10/100/1000BASE-T.

SFP-GE-S

Yes

Yes

1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength,
extended operating temperature range and DOM support, dual
LC/PC connector.

SFP-GE-T

Yes

Yes

10/100/1000BASE-T SFP (NEBS 3 ESD).

CWDM-SFP-1470

Yes

Yes

CWDM 1470 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1490

Yes

Yes

CWDM 1490 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1510

Yes

Yes

CWDM 1510 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1530

Yes

Yes

CWDM 1530 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1550

Yes

Yes

CWDM 1550 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1570

Yes

Yes

CWDM 1570 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1590

Yes

Yes

CWDM 1590 NM SFP Gigabit Ethernet and 1G/2G FC.

CWDM-SFP-1610

Yes

Yes

CWDM 1610 NM SFP Gigabit Ethernet and 1G/2G FC.

DWDM-SFP-3033

Yes

Yes

DWDM SFP 1530.33 nm SFP (100 GHz ITU grid).

DWDM-SFP-3112

Yes

Yes

DWDM SFP 1531.12 nm SFP (100 GHz ITU grid).

DWDM-SFP-3190

Yes

Yes

DWDM SFP 1531.90 nm SFP (100 GHz ITU grid).

DWDM-SFP-3268

Yes

Yes

DWDM SFP 1532.68 nm SFP (100 GHz ITU grid).

DWDM-SFP-3425

Yes

Yes

DWDM SFP 1534.25 nm SFP (100 GHz ITU grid).

DWDM-SFP-3504

Yes

Yes

DWDM SFP 1535.04 nm SFP (100 GHz ITU grid).

DWDM-SFP-3582

Yes

Yes

DWDM SFP 1535.82 nm SFP (100 GHz ITU grid).

DWDM-SFP-3661

Yes

Yes

DWDM SFP 1536.61 nm SFP (100 GHz ITU grid).

DWDM-SFP-3819

Yes

Yes

DWDM SFP 1538.19 nm SFP (100 GHz ITU grid).

DWDM-SFP-3898

Yes

Yes

DWDM SFP 1538.98 nm SFP (100 GHz ITU grid).

DWDM-SFP-3977

Yes

Yes

DWDM SFP 1539.77 nm SFP (100 GHz ITU grid).

DWDM-SFP-4056

Yes

Yes

DWDM SFP 1540.56 nm SFP (100 GHz ITU grid).

DWDM-SFP-4214

Yes

Yes

DWDM SFP 1542.14 nm SFP (100 GHz ITU grid).

DWDM-SFP-4294

Yes

Yes

DWDM SFP 1542.94 nm SFP (100 GHz ITU grid).

DWDM-SFP-4373

Yes

Yes

DWDM SFP 1543.73 nm SFP (100 GHz ITU grid).

© 2019 Cisco and/or its affiliates. All rights reserved. Page 28 of 31

Small Form-Factor Pluggable

ISR 1100 8P

ISR 1100 4P

Description

DWDM-SFP-4453

Yes

Yes

DWDM SFP 1544.53 nm SFP (100 GHz ITU grid).

DWDM-SFP-4612

Yes

Yes

DWDM SFP 1546.12 nm SFP (100 GHz ITU grid).

DWDM-SFP-4692

Yes

Yes

DWDM SFP 1546.92 nm SFP (100 GHz ITU grid).

DWDM-SFP-4772

Yes

Yes

DWDM SFP 1547.72 nm SFP (100 GHz ITU grid).

DWDM-SFP-4851

Yes

Yes

DWDM SFP 1548.51 nm SFP (100 GHz ITU grid).

DWDM-SFP-5012

Yes

Yes

DWDM SFP 1550.12 nm SFP (100 GHz ITU grid).

DWDM-SFP-5092

Yes

Yes

DWDM SFP 1550.92 nm SFP (100 GHz ITU grid).

DWDM-SFP-5172

Yes

Yes

DWDM SFP 1551.72 nm SFP (100 GHz ITU grid).

DWDM-SFP-5252

Yes

Yes

DWDM SFP 1552.52 nm SFP (100 GHz ITU grid).

DWDM-SFP-5413

Yes

Yes

DWDM SFP 1554.13 nm SFP (100 GHz ITU grid).

DWDM-SFP-5494

Yes

Yes

DWDM SFP 1554.94 nm SFP (100 GHz ITU grid).

DWDM-SFP-5575

Yes

Yes

DWDM SFP 1555.75 nm SFP (100 GHz ITU grid).

DWDM-SFP-5655

Yes

Yes

DWDM SFP 1556.55 nm SFP (100 GHz ITU grid).

DWDM-SFP-5817

Yes

Yes

DWDM SFP 1558.17 nm SFP (100 GHz ITU grid).

DWDM-SFP-5898

Yes

Yes

DWDM SFP 1558.98 nm SFP (100 GHz ITU grid).

DWDM-SFP-5979

Yes

Yes

DWDM SFP 1559.79 nm SFP (100 GHz ITU grid).

DWDM-SFP-6061

Yes

Yes

DWDM SFP 1560.61 nm SFP (100 GHz ITU grid).

For more information

For more information about the Cisco 1000 Series ISRs, visit: https://www.cisco.com/go/ISR1000 or contact your local
Cisco account representative.

To learn more about Cisco SD-WAN Security, visit: https://www.cisco.com/c/en/us/solutions/enterprise-networks/sd-

wan/sd-wan-security.html.

For additional information and details about Cisco IOS Software licensing and packaging on the Cisco 1000 Series, please
visit:

https://www.cisco.com/c/en/us/support/routers/1110-integrated-services-router/model.html#LicensingInformation.

For the Cisco 1000 Series ISR Hardware and Software Installation Guide, Go to:

https://www.cisco.com/c/en/us/support/routers/1110-integrated-services-router/model.html#InstallandUpgradeGuides.

https://www.cisco.com/c/en/us/support/routers/1110-integrated-services-router/model.html#ConfigurationGuides.

© 2019 Cisco and/or its affiliates. All rights reserved. Page 29 of 31

Sustainability topic

Reference

Information on product material content laws and regulations

Materials

Information on electronic waste laws and regulations, including products, batteries, and packaging

WEEE compliance

Cisco and partner services

Services from Cisco and our certified partners can help you reduce the cost and complexity of branch office deployments.
Cisco Smart Net Total Care™ technical support for the Cisco 1000 Series ISRs is available on a one-time or annual contract
basis. Support options range from help-desk assistance to proactive, onsite consultation.

For more information, visit https://www.cisco.com/go/services.

Ordering information

To place an order, visit the Cisco Ordering Home Page. To download software, visit the Cisco Software Center.

Cisco environmental sustainability

Information about Cisco’s environmental sustainability policies and initiatives for our products, solutions, operations, and
extended operations or supply chain is provided in the “Environment Sustainability” section of Cisco’s Corporate Social

Responsibility (CSR) Report.

Reference links to information about key environmental sustainability topics (mentioned in the “Environment
Sustainability” section of the CSR Report) are provided in the following table:

Cisco makes the packaging data available for informational purposes only. It may not reflect the most current legal
developments, and Cisco does not represent, warrant, or guarantee that it is complete, accurate, or up to date. This
information is subject to change without notice.

Cisco Capital

Flexible payment solutions to help you achieve your objectives

Cisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformation
and help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, and accelerate
growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware, software, services and
complementary third-party equipment in easy, predictable payments. Learn more.

© 2019 Cisco and/or its affiliates. All rights reserved. Page 30 of 31

New or revised topic

Described in

Date

Added support for CAT18 Pluggable and
USB LTE Dongle

Table 11, 13, 14, 15, 16 and 18

September 24, 2019

Add support for additional SFPs

Table 16

August 2, 2019

Add support for P-1T high speed serial
pluggable module and update some
corrections

Updated throughout document

April 18, 2019

Add support for C1109-4PLTE2P models,
LIC-DNA-ADD option, SDWAN
promotional PIDs, and C1-ISR-ADD option

Updated throughout document

January 11, 2019

Add support for new platforms, add
available date

C1118-8P, C1111X-8P, C1109-2PLTEXX

October 05, 2018

Document History

Printed in USA C78-739512-11 10/19

© 2019 Cisco and/or its affiliates. All rights reserved. Page 31 of 31