Cisco 7926G User Manual

Preface
This chapter describes the intended audience, objectives, organization, and lists related documentation. It contains the following sections:
Overview, page xi
Organization, page xii
Related Documentation, page xiii
Obtaining Documentation and Submitting a Service Request, page xiii
Overview
Audience
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide provides the information you need to understand, install, configure, and manage the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G on your network. This guide is intended to be used to administer phones running with Cisco Unified Communications Manager Release 4.3 and later.
Network engineers, system administrators, or telecom engineers should review this guide to learn the steps required to properly set up the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G on the wireless network.
The tasks described are considered to be administration-level tasks and are not intended for end-users of the phones. Many of the tasks involve configuring network settings and could affect the phone functioning in the network.
Because of the close interaction between the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G and Cisco Unified Communications Manager, these tasks require familiarity with Cisco Unified Communications Manager.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
xi
Organization
This guide is organized as follows:
Chapter Description
Chapter 1, “Overview of the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G”
Chapter 2, “Overview of the VoIP Wireless Network”
Chapter 3, “Setting Up the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G”
Chapter 4, “Using the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages”
Chapter 5, “Configuring Settings on the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G”
Chapter 6, “Configuring the Phone Using the Wavelink Avalanche Server”
Chapter 7, “Configuring Features, Templates, Services, and Users”
Chapter 8, “Viewing Security, Device, Model, Status, and Call Statistics Information on the Phone”
Chapter 9, “Monitoring the Cisco Unified Wireless IP Phone Remotely”
Chapter 10, “Troubleshooting the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G”
Appendix A, “Providing Information to Users By Using a Website”
Appendix B, “Supporting International Users” Provides information about setting up phones in
Preface
Provides a conceptual overview and description of the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G and provides an overview of the tasks required prior to installation
Describes how the IP Phone interacts with other key IP telephony and wireless network protocols and components
Describes how to properly and safely install and configure the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G on your network
Describes how to use the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G web pages for initial phone configuration and to update configuration files for the wireless IP phone
Describes how to configure network profiles and phone settings, by using the Settings menu on the wireless IP phone
Describes how to use the Configuration Utility on the Wavelink Avalanche server for updating the phone configuration
Provides an overview of procedures for configuring telephony features and adding users to Cisco Unified Communications Manager
Explains how to view phone security, device, and network information and network and call statistics from the wireless IP phone
Explains how to obtain status information about the phone using the phone web page
Provides tips for troubleshooting the wireless IP phone
Provides suggestions for setting up a website for providing users with important information about their wireless IP phone
non-English environments
xii
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Loading...
+ 2 hidden pages