Cisco 1000 User Manual
Use & Care Guide
Revised: March 5, 2009, OL-16247-01
Cleaning the Plasma Display
Per industry-standard best practice recommendations for cleaning the plasma display:
The plasma displays require special consideration when cleaning. Wipe the panel surface gently using
only a cleaning cloth or a soft, lint-free cloth. If the surface is particularly dirty, wipe with a soft, lint-free
cloth which has been soaked in pure water or water to which a small amount of neutral detergent has
been added, and then wipe it evenly with a dry cloth of the same type until the surface is dry.
Cleaning the Camera Lens
CHAP T E R
7
Caution Do not touch the camera after installation is completed. If you need to clean the camera lens, use a dry
microfiber cloth. After cleaning, you will need to realign the camera.
OL-16247-01
Cisco TelePresence 1000 Assembly, Use & Care, and Field-Replaceable Unit Guide
7-1
Cleaning the Camera Lens
Chapter 7 Use & Care Guide
7-2
Cisco TelePresence 1000 Assembly, Use & Care, and Field-Replaceable Unit Guide
OL-16247-01
Loading...