Chicago Electric 97448 User Manual
DESKTOP MAGNIFYING LAMP
Model
97448
ASSEMbLY AND OPErATION INSTrucTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
SAVE THIS MANuAL
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
Notice
cAuTION
NOTIcE is used to
address practices
not related to personal injury.
cAuTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
rEAD AND uNDErSTAND ALL
INSTrucTIONS
IMPOrTANT SAFETY
INSTrucTIONS
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGEr indicates
DANGEr
situation which, if not
avoided, will result in death or
serious injury.
WArNING
WArNING
hazardous situation which, if
not avoided, could result in
death or serious injury.
a hazardous
indicates a
When using electrical appliances,
safety precautions should always be
followed including the following:
Work Area Safety
Do not use outdoors.1.
Close supervision is necessary when 2.
any appliance is used by or near
children.
Do not let cord hang over edge of 3.
table or counter, or touch hot surfaces.
Do not place on or near a hot gas or 4.
electric burner, or in a heated oven.
Extreme caution must be used when 5.
moving Lamp.
Keep the work area well lit. Make 6.
sure there is adequate surrounding
workspace. Keep the work area free
of obstructions and other debris.
Electrical Safety
cAuTION
cAuTION, used
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
with the safety
1. To protect against electrical shock do not immerse
cord, plug, or the main unit
in water or other liquids.
Page 2SKU 97448 For technical questions, please call 1-800-444-3353.
Unplug from outlet when not in use 2.
and before maintenance or cleaning.
3.
Do not operate with a damaged cord
or plug or after the Lamp malfunctions or has been damaged in any
manner. Return Lamp to the nearest
authorized service facility for examination, or repair.
This Lamp has a polarized plug (one 4.
blade is wider than the other). To
reduce the risk of electric shock, this
plug is intended to t into a polarized
outlet only one way. If the plug does
not t fully in the outlet, reverse the
plug. If it still does not t, contact a
qualied electrician. Do not change
the plug in any way.
Do not use in a damp or wet location.5.
Power cord Safety
General Safety
cAuTION! TO rEDucE rISK OF 1.
FIrE, uSE ONLY TYPE T cIrcuLINE, 12-WATT LAMPS.
The use of any accessory attach-2.
ments not recommended by the
Lamp manufacturer may cause injuries.
Do not place under direct sunlight.3.
Do not use Lamp for other than in-4.
tended use.
Maintain labels and nameplates on 5.
the appliance. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
Do not stare at bright light or the sun 6.
through the Lamp’s magnifying lens.
1. A short power supply cord is to be
provided to reduce risks resulting
from becoming entangled in or tripping over a longer cord.
2. Longer extension cords are available
and may be used if care is exercised
in their use.
3. If a long extension cord is used,
the marked electrical rating of the a.
(detachable power supply cord or)
extension cord should be at least as
great as the electrical rating of the
Lamp,
if the Lamp is of the grounded type,
b.
the extension cord should be a
grounding type 3-wire cord, and
the longer cord should be arranged c.
so that it will not drape over the
counter top or tabletop where it can
be pulled on by children or tripped
over.
Do not obstruct walkways or common 7.
areas with Lamp or cord.
This Lamp is not a toy. Keep it out of 8.
reach of children when children are
not being closely supervised.
The warnings, precautions, and in-9.
structions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTrucTIONS.
Page 3SKU 97448 For technical questions, please call 1-800-444-3353.
SPEcIFIcATIONS
Electrical Requirements 120 V~ / 60 Hz
Material
Magnication 3 D + 12 D
Bulb Type
Cord Length 4’ - 9”
Height 20”
Base Dimensions 8-5/16” L x 4-1/4” W
ABS plastic frame
Glass lens
4T 12W Energy Saving
Compact Fluorescent Lamp
E224011
uNPAcKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
Power
Switch
Figure A
2. Turn on the Lamp by pushing down
on the black Power Switch (12) found
at the back of the Lamp’s base. See
Figure A, above.
Lens
Frame
Lens
cover
Adjusting
Knob
OPErATION
read the ENTIrE IMPOrTANT
SAFEGuArDS section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this Lamp.
Plug the power cord into the nearest 1.
two or three prong outlet.
Lens
Figure b
3. To use the Lamp’s magnication set-
tings, pull open the Lens Cover (3)
from the Lens Frame (2). See Figure
b, above.
Use the Adjusting Knob (9) to reach 4.
the desired angle.
After each use, shut the Lens Cover 5.
(3) and remove the Power Cord (13)
from the outlet.
Page 4SKU 97448 For technical questions, please call 1-800-444-3353.
Store Lamp in a safe location out of 6.
the reach of children.
rEPLAcING THE buLb
NOT attached to the Frame and may
pop out.
When replacing the Lamp bulb
(5), be sure to wear ANSIapproved safety goggles. Also,
keep track of the Screws (8)
during replacement. The
Screws are very small and can
be swallowed by young
children.
To replace the Bulb (5), turn off the 1.
Lamp and unplug the Power Cord
(13) from the outlet.
Lie down the Lamp down and set the 2.
Adjusting Knob (9) so that the Lamp
rests on the work area with the Bulb
facing up.
Screws
Glass Frame
bulb
bulb Support Latch
Figure D
5. Pull up on the Bulb Support Latch (6).
See Figure D, above.
Glass Frame
bulb
Screws
Figure c
3. Use a #0 Phillips screwdriver (not
included) to remove the ve Screws
(8) from the Glass Frame (4). See
Figure c, above.
4.
Lift the Glass Frame (4) and Arm
(10) away from the Lens Frame (2).
Please note: Be careful when moving Lens and Lens Frame; the Lens is
bulb Socket
Figure E
6. Pull the Bulb (5) out of square Bulb
Socket (7). See Figure E, above.
Properly dispose of old Bulb and at-7.
tach new 4T 12W Energy Saving bulb
to Bulb Socket (7).
Page 5SKU 97448 For technical questions, please call 1-800-444-3353.
Loading...