Chevrolet Equinox 2008 Navigation Manual

2008 Acadia, Enclave, Equinox, Lucerne, OUTLOOK, Torrent

Overview

Features and Controls

........................................................ 1-1

.................................................. 1-2

and VUE Navigation System

Navigation Audio System

..................................... 2-1

................................ 2-2

Voice Recognition

............................................................. 1-1

Index

................................ 3-1

............................ 3-2

........................................... 4-1

...................................... 4-2

Litho in U.S.A. Part No. 25889642 B Second Printing

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, BUICK, the BUICK Emblem, GMC and the GMC Truck Emblem, PONTIAC, the PONTIAC Emblem, and the names EQUINOX, LUCERNE and TORRENT are registered trademarks; the names ENCLAVE and ACADIA are trademarks of General Motors Corporation.

SATURN, the SATURN Emblem and the name VUE are registered trademarks; the name OUTLOOK is a trademark of Saturn Corporation.

DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.

The information in this manual supplements the owner manual. This manual includes the latest information available at the time it was printed. We reserve the right to make changes in the product after that time without notice. For vehicles ﬁrst sold in Canada, substitute the name General Motors of Canada Limited for Buick Motor Division, Chevrolet Motor Division, GMC, or Pontiac Division whenever it appears in this manual.

Keep this manual with the owner manual in the vehicle, so it will be there if it is needed. If the vehicle is sold, leave this manual in the vehicle.

Dolby

is manufactured under license from Dolby Laboratories. Dolby®and the double-D symbol are trademarks of Dolby®Laboratories.

iii

Canadian Owners

A French language copy of this manual can be obtained from your dealer/retailer or from:

Helm, Incorporated P.O. Box 07130 Detroit, MI 48207

1-800-551-4123 www.helminc.com

Propriétaires Canadiens

On peut obtenir un exemplaire de ce guide en français auprès de concessionnaire ou à l’adresse suivante:

Helm Incorporated P.O. Box 07130 Detroit, MI 48207

1-800-551-4123 www.helminc.com

Section 1 Overview

Overview .........................................................1-2

Navigation System Overview ............................1-2

Getting Started ...............................................1-4

Cleaning the Video Screen .............................1-11

1-1

Overview

Navigation System Overview

Screen shown with Map Disc Inserted

1-2

A. Map DVD Slot. See “Installing the Map DVD” under

Maps on page 2-4 for more information.

B. FULL MAP Touch Screen Button. See “NAV” under

“Hard Keys” under Using the Navigation System on page 2-2 for more information.

C. No GPS Symbol. See Symbols on page 2-7 for more

information.

O (Power/Volume) Knob. See Navigation Audio

System on page 3-2 for more information.

E. North Up/Heading Up Symbol. See Symbols on

page 2-7 for more information.

F. NAV (Navigation) Key. See “Hard Keys” under Using

the Navigation System on page 2-2 for more

information.

G. DEST (Destination) Key. See Destination on

page 2-14 for more information.

H. RPT (Repeat) Key. See “Hard Keys” under Using

the Navigation System on page 2-2 for more information.

I. FAV (Favorite) Key. See “Storing Radio Station

Presets” under Navigation Audio System on page 3-2 for more information.

J. Map Scale. See “Map Scales” under Maps on

page 2-4 for more information.

0 (Zoom In) Touch Screen Button. See “Map

Scales” under Maps on page 2-4 for more information.

L. Mark Touch Screen Button. See “Adding

Destinations to the Address Book” under Destination on page 2-14 for more information.

M. CD/DVD Slot. See CD Player on page 3-10 or DVD

Player on page 3-17 for more information.

N. Source (AM, FM, XM, CD, etc.) Touch Screen

Button. See Navigation Audio System on page 3-2 for more information.

Z (CD/DVD Eject) Key. See “Hard Keys” under

Using the Navigation System on page 2-2 for more information.

P. Auxiliary Jack. See Auxiliary Devices on page 3-24

for more information.

Q. Clock Touch Screen Button. See “Setting the Clock”

under Conﬁgure Menu on page 2-29 for more information.

f (Tune/Sound) Knob. See Navigation Audio

System on page 3-2 for more information.

S. AUDIO Key. See Navigation Audio System on

page 3-2 for more information.

T. MENU Key. See Conﬁgure Menu on page 2-29 for

more information.

1-3

U. ¨ SEEK Key (Next). See Navigation Audio System

on page 3-2 for more information.

System on page 3-2 for more information.

1 (Zoom Out) Touch Screen Button. See “Map

Scales” under Maps on page 2-4 for more information.

X. POI (Point of Interest) Touch Screen Button. See

“Displaying Points of Interest (POI) on the Map Screen” under Symbols on page 2-7 for more information.

Getting Started

Before operating the navigation system, read this manual to become familiar with its operation.

While entering the vehicle or when turning the vehicle off, some DVD Map Disc noise is normal.

Keeping your mind on the drive is important for safe driving. See “Defensive Driving” in the Index of your vehicle’s owner manual for more information.

The navigation system includes navigation and audio functions.

While the vehicle is parked:

• Familiarize yourself with all of its controls.

• Familiarize yourself with its operation.

• Set up your audio by presetting your favorite

stations, setting the tone, and adjusting the speakers.

• Set up the navigation features that can only be

done before you begin driving.

A destination or alphanumeric text can only be entered when the vehicle is in PARK (P). The touch-sensitive screen buttons leading to the alphanumeric keyboard are not lit while driving.

Not all functions are available while driving. They appear grayed out on the screen. All functions are available when parked. Some functions can be performed while driving, as long as you can do so without diverting too much of your attention from your driving.

1-4

{CAUTION:

This system provides you with a far greater access to audio stations and song listings. Giving extended attention to entertainment tasks while driving can cause a crash and you or others can be injured or killed. Always keep your eyes on the road and your mind on the drive — avoid engaging in extended searching while driving.

{CAUTION:

Looking at the moving map on the navigation screen frequently or for too long while driving can cause a crash and you or others can be injured or killed. Keep your eyes and mind on the road and avoid looking too long or too often at the moving map on the navigation screen. Use the voice guidance directions whenever possible.

The navigation system lets you:

• Plan a route with provided turn-by-turn route and

map guidance with voice prompts.

• Select a destination using various methods and

choices.

• Receive RDS broadcast announcements.

Always be alert and obey traffic and roadway laws and instructions, regardless of the guidance from the navigation system. The navigation system uses street map information that does not include all traffic restrictions or the latest road changes; it may suggest using a road that is now closed for construction or a turn that is prohibited by signs at the intersection. The system uses limited information. Always evaluate whether following the system’s directions is safe and legal for the current conditions.

1-5

Every ﬁfty times the vehicle is started and the navigation system is turned on, the Caution screen appears. After reading the caution, select OK to load the map DVD information. If OK is not selected, all hard keys except for NAV (Navigation) and DEST (Destination) can be accessed. You can also press the NAV hard key to have this Caution screen appear.

When getting started, set the navigation system to your preference or delete information you may have entered using various options.

Language

For vehicles with a Driver Information Center (DIC), see “DIC Vehicle Customization” in the Index of your vehicle’s owner manual to change the language of the navigation screens.

For vehicles without a Driver Information Center (DIC), the radio can be used to change the language of the navigation screens:

1. Press the O (power) knob to turn the system on.

2. Press the MENU hard key and select the Display screen button.

3. Select the language; English, Francais, Espanol.

English/Metric Units

To change the navigation screens from English or metric, see “DIC Operation and Displays” in the Index of your vehicle’s owner manual.

1-6

Deleting Personal Information

This navigation system can record and store personal information such as names and addresses. It is recommended that stored personal information is deleted when disposing the vehicle. See “Edit Address Book — Edit/View” under Conﬁgure Menu on page 2-29 for deleting information from the address book.

Storing Radio Station Presets

To set preset radio stations:

1. Press

2. Press the AUDIO hard key and select the desired

3. Use the

4. Press and hold one of the ﬁve preset screen

5. Repeat the steps for each preset.

See “Storing Radio Station Presets” under Navigation Audio System on page 3-2 for more information.

O to turn the system on.

band (AM, FM1, FM2, XM1, or XM2 (if equipped)).

f (tune) knob or the SEEK arrows to go to

the desired station.

buttons, at the bottom of the screen, until a beep is heard or see the station displayed on the selected preset button.

Setting the Clock

1. Press O to turn the system on.

2. Press the MENU key to enter the conﬁgure menu options, then press the MENU key repeatedly until the time is selected or select the time screen button.

3. Press the Set screen button.

4. Press the Hours and Minutes − (minus) and + (plus)

signs to decrease or to increase the time.

See “Setting the Clock” under Conﬁgure Menu on page 2-29 for more information.

Entering an Address and Point of Interest, and Storing Preset Destinations

Entering an Address

To enter a destination by entering the city name ﬁrst:

1. If the radio is on with a map disc inserted, skip to Step 5.

2. Press

3. Insert the DVD map disc. See “Installing the Map

4. A caution may appear. Select the OK screen button

O to turn the system on.

DVD” under Maps on page 2-4 for more information.

to proceed.

1-7

5. Press the DEST hard key.

6. Select the

7. Select the state/province screen button, if needed, to change the current state or province.

2 Address Entry screen button.

• Enter the name or enter the two-letter

abbreviation. A list displays.

• Another way is to select the List screen button

and then, select the state or province.

8. Select the City name button and start entering the city name.

• If ﬁve or less names are available, a list displays.

• If more than ﬁve are available, the List screen

button will have a number in it that represents the number of available cities. Select this button to view the list and select a city.

9. Once a city has been selected, the Street name category is automatically selected for entry.

Do not enter directional information or street type. Use the space symbol screen button (

between street or city names. For example, the street name N. Royal Oak Rd. should be entered as

royal

U oak. Use the backspace ( V ) screen

button if an incorrect character has been entered.

U )

• If ﬁve or less streets are available for the

selected city, the system displays the list of streets.

• If more than ﬁve streets are available the system

displays the alpha keyboard. Start entering the street name. If ﬁve or less names are available, a list displays. If more than ﬁve are available, the List screen button will have a number in it that represents the number of available streets. Select this button to view the list and select a street.

10. Once a street has been selected, select the House # screen button to enter the house number. The system displays the house number range that is available for the street.

11. Select the Go screen button. A map screen, with the destination marked appears.

12. Select the route preference (Fastest, Shortest, or Other). The system calculates and highlights the route.

13. Select the Start Guidance screen button. The route can now be started.

See “Address Entry ” under Destination on page 2-14 for more information.

1-8

Entering a Point of Interest (POI)

To set a destination by entering a Point of Interest (POI):

1. If the radio is on with a map disc inserted, skip to Step 5.

2. Press

3. Insert the DVD map disc. See “Installing the Map

4. A caution may appear. Select the OK screen button

5. Press the DEST hard key.

6. Select the

7. Select the state/province screen button, if needed,

O to turn the system on.

DVD” under Maps on page 2-4 for more information.

to proceed.

i Point of Interest screen button.

to change the current state or province.

• Enter the name or enter the two-letter

abbreviation. A list displays.

• Select the List screen button and select the state

or province.

8. Enter the speciﬁc title of the POI in the POI name space (i.e. Washington Monument).

• If ﬁve or less names are available, a list displays.

• If more than ﬁve are available, the List screen

button will have a number in it, it represents the number of available POIs. Select this button to view the list.

9. Select the Go screen button next to the POI. A map screen, with the destination marked appears.

10. Select the route preference (Fastest, Shortest, or Other). The system calculates and highlights the route.

11. Select the Start Guidance screen button. You are now ready to start your route.

See “Point of Interest (POI)” under Destination on page 2-14 for more information.

Storing Preset Destinations

1. If the radio is on with a map disc inserted, skip to Step 5.

2. Press

3. Insert the DVD map disc. See “Installing the Map

4. A caution may appear. Select the OK screen button

5. Press the DEST hard key.

6. Select the Map screen button after entering

7. Select the Mark screen button from the map.

O to turn the system on.

DVD” under Maps on page 2-4 for more information.

to proceed.

Enter a destination. See Destination on page 2-14 for more information on how to enter a destination.

the destination.

The address book screen appears.

1-9

8. Select the Name screen button. An alpha-keyboard displays. Enter the name.

9. Press and hold one of the screen buttons at the bottom of the screen until the name appears in the screen button on the display.

The name appears in that preset destination screen button and is now available to select from the Destination Entry screen. See “Using Your Stored Preset Destinations” next in this section to select it as a destination.

See “Adding or Changing Preset Destinations” under Destination on page 2-14 for more information on how to add preset destinations.

Using Your Stored Preset Destinations

These destinations are available for selection while driving.

1. If the radio is on with a map disc inserted, skip to Step 5.

2. Press

3. Insert the DVD map disc. See “Installing the Map

4. A caution may appear. Select the OK screen button

O to turn the system on.

DVD” under Maps on page 2-4 for more information.

to proceed.

5. Press the DEST hard key.

6. Select one of the available preset destination screen buttons. A map screen, with the destination marked appears.

7. Select the route preference (Fastest, Shortest, or Other). The system calculates and highlights the route.

8. Select the Start Guidance screen button. The route can now be started.

See “Preset Destination” under Destination on page 2-14 for more information.

Canceling Guidance

Guidance is canceled once you arrive at your ﬁnal destination. To cancel guidance prior to arrival at the ﬁnal destination:

1. Press the DEST hard key.

2. Select the Cancel Guidance screen button.

3. A pop-up conﬁrmation appears. Select OK to cancel guidance or Cancel to cancel the request.

1-10

Guidance Volume

To adjust the volume of voice guidance prompts:

1. Press the MENU hard key to enter the menu options, then press the MENU key repeatedly until Nav is selected or select the Nav screen button.

2. Select the Voice Prompt screen button.

3. Select the On screen button if voice guidance is not on.

4. Select the + (plus) or – (minus) screen buttons to increase or to decrease the volume of the voice prompts. The system responds with the adjusted voice level.

See “Voice Prompt ” under Conﬁgure Menu on page 2-29 for more information.

Turning the navigation prompt will also change the volume.

O (volume) knob during a voice or

Cleaning the Video Screen

Use a soft clean cotton cloth dampened with clean water.

1-11

✍ NOTES

1-12

Section 2 Features and Controls

Features and Controls ......................................2-2

Using the Navigation System ...........................2-2

Maps ............................................................2-4

Symbols ........................................................2-7

Destination ..................................................2-14

Conﬁgure Menu ............................................2-29

Rear Vision Camera ......................................2-36

Global Positioning System (GPS) ....................2-40

Vehicle Positioning ........................................2-41

Problems with Route Guidance .......................2-42

If the System Needs Service ..........................2-43

Ordering Map DVDs ......................................2-43

Database Coverage Explanations ....................2-43

2-1

Features and Controls

Using the Navigation System

This section includes basic information to operate the navigation system.

Use the hard keys and the touch-sensitive screen buttons on the navigation screen to operate the system. See Navigation System Overview on page 1-2 for more information.

Once the vehicle is moving, some functions become disabled to reduce driver distractions.

Hard Key Operation

(Power/Volume):

• Press to turn the system on and off.

• Turn to increase or decrease the volume to the

audio system.

• Press and hold O for more than two seconds to

turn off the navigation system, the Rear Seat Entertainment (RSE), and Rear Seat Audio (RSA). If the vehicle has not been turned off, the RSE

and the RSA can be turned back on by pressing and continues playback of the last active source.

f (Tune/Speaker Adjustment):

• Press f to access the Sound screen to adjust

bass, midrange, treble, and equalization.

• Turn to go to the next or previous radio station.

See Navigation Audio System on page 3-2 for more information.

Z (CD/DVD Eject): Press to eject CDs and DVDs.

NAV (Navigation):

• Press to view your vehicle’s current position on the

map screen.

• Press multiple times to cycle through Full Map

and the tab that displays the current audio source (AM, FM, CD, etc.). Full Map displays the screen in full map view.

• Select the audio tab to split the screen between the

map screen and the current audio source screen menu. See “Audio” under Navigation Audio System on page 3-2 for more information.

DEST (Destination): Press to access the Destination Entry screen to plan a destination. See Destination on page 2-14 for more information.

RPT (Navigation Repeat): Press to repeat the last voice guidance prompt.

2-2

FAV (Favorite): Press to access the preset stations. See “Storing Radio Station Presets” under Navigation Audio System on page 3-2 for more information.

AUDIO: Press to access the full Audio screen to change AM, FM, XM™ Satellite Radio Service (if equipped), CD, DVD, if equipped, and auxiliary input. See “Audio” under Navigation Audio System on page 3-2 for more information.

MENU: Press to adjust features for sound, radio, navigation, the display, and for adjusting the time. See Conﬁgure Menu on page 2-29 for more information.

¨SEEK / ©SEEK: Press either arrow to seek and

scan radio stations, to seek tracks on a CD, or to seek chapters on a DVD, if equipped. See Navigation Audio System on page 3-2, CD Player on page 3-10, or DVD Player on page 3-17 for more information.

Touch-Sensitive Screen Buttons

These buttons are located on the screen. When selected, a beep will sound. Screen buttons are highlighted when a feature is available.

Alpha-Numeric Keyboard

Letters of the alphabet, symbols, punctuation, and numbers, when available, display on the navigation screen as an alpha or numeric keyboard. The alpha keyboard displays when the system requires entry of a city or street name.

All characters are touch-sensitive screen buttons. Touch a character to select it.

A-Y (Accent Alphabet): Select to get letters with accent symbols. This button may toggle to A-Z.

A-Z (Alphabet): Select to get letters from the alphabet. This button may toggle to A-Y.

0-9 (Numbers): Select to get numbers and punctuation marks.

U (Space): Select to enter a space between

characters or the words of a name.

Backspace: Select if an incorrect character has been entered.

To make name selections easier, the system only highlights the characters that can follow the last one entered. For example, if a Z is entered, a T may not be available for selection.

If a name does not display after entry, it may need to be entered differently or the map DVD disc may not contain that information. See Database Coverage Explanations on page 2-43 for more information.

2-3

Maps

This section includes basic information about the map database.

Map Coverage

The maps are stored on a DVD. The United States, Canada, Puerto Rico, and the U.S. Virgin Islands are contained on one disc.

Refer to the “Navigation System Map Disc” manual for a detailed explanation of map coverage and detailed city lists in each region. This manual is in the map DVD case when the vehicle is delivered from the factory.

Installing the DVD Map Disc

Your dealer/retailer may have installed the map DVD. If the map DVD was not installed, do the following to load it:

Read the following steps completely.

1. Turn the ignition on. Your vehicle must be in PARK (P) to perform this operation.

2. Press

3. Press the NAV hard key.

4. Touch the Insert Map Disc screen button.

O (power) to turn the navigation system on.

The screen opens to access the map DVD slot.

5. Load the map DVD partway into the slot. The system pulls it in.

The screen cannot be closed until a double beep is heard.

Notice: Pressing directly on the navigation screen may cause damage. Repairs would not be covered by your warranty. Do not press directly on the navigation screen.

6. To close the screen, slightly push up on the two outer corners until the screen is in position. Then push the screen in by pushing on the four outer corners until you hear a click.

2-4

Ejecting the DVD Map Disc

The navigation portion of the system cannot be used if the DVD map disc is not loaded.

1. Press the MENU key to enter the Menu options, then press the MENU key repeatedly until Nav is selected or touch the Nav screen button.

2. Touch the Map Database Information screen button.

3. Touch the Eject Map Disc screen button. The screen tilts, exposing the map DVD slot.

4. Press the eject button, located next to the DVD map disc slot, and the disc ejects. Pull the disc out.

The screen cannot be closed until a double beep is heard.

Notice: Pressing directly on the navigation screen may cause damage. Repairs would not be covered by your warranty. Do not press directly on the navigation screen.

5. To close the screen, slightly push up on the two outer corners until the screen is in position. Then push the screen in by pushing on the four outer corners until you hear a click.

Handling the DVD Map Disc

To properly handle the DVD map disc:

• Handle the disc very carefully to avoid

contamination or ﬂaws. Signals may not read out properly if the disc gets contaminated or ﬂawed.

• Do not use photographic record cleaner, solvents,

or other cleaners if the disc gets soiled. Use a soft cloth to gently wipe it out from the center of the disc to the outside.

• Do not use the disc to rest on while writing or

drawing with any writing utensil. Do not attach a seal to the disc.

• Do not keep the disc in direct sunlight, high

temperatures, or humidity.

• After using the disc, place it back into the

original case.

2-5

Map Adjustments

The system lets you adjust the scale of view on the map. Also, as you drive, the map scrolls automatically based on the direction of travel.

Map Scales

/ 1 (Zoom In/Zoom Out):

• Touch the zoom in or out screen buttons or the

scale on the bar to change the level of map detail. The scale appears on the screen once the zoom in or zoom out screen buttons are selected. The system adjusts the map accordingly. The scale of a map can range from 1/32 mi. (50 m) to 256 mi. (400 km).

• See “Driver Information Center, DIC Controls and

Displays” in the Index of your vehicle’s owner manual to change between English or metric.

Scrolling the Map

Touch anywhere on the map screen and the scroll symbol appears. Use this feature to scroll across the map.

• Move your ﬁnger in any direction on the map

screen and the map continues to scroll in that direction.

− If scrolling while your vehicle is in PARK (P), the system initially scrolls at a slower rate. The scroll speed increases if you continue touching the map screen.

− If scrolling while your vehicle is in motion, there is one scroll speed and the distance is limited. You have to keep touching the map screen to scroll for a longer distance.

• Press the NAV (Navigation) key to return to the

current vehicle location on the map if your vehicle icon disappears from the screen.

2-6

• Use the scroll feature on the map to set a

destination. See “From Map” under Destination on page 2-14 for more information.

• Press the GO screen button to calculate the route

from your current position to the destination mark, while scrolling on the map without a planned route.

The destination symbol appears on the map, after a route has been planned, marking the ﬁnal destination.

Symbols

The following symbols are the most common symbols that appear on a map screen.

Your vehicle is shown as this symbol. It indicates the current position and the direction your vehicle is traveling on the map.

The stopover symbol displays on the map after a stopover has been added to the route.

The stopover symbols are numbered one through three, depending on how many stopovers have been set.

2-7

The distance to destination symbol indicates the distance to the ﬁnal destination.

This symbol appears when the time to the destination is not available or while you are scrolling on the map.

The straight line to distance symbol indicates the straight-line distance to your destination.

2-8

The distance and time to destination symbol indicates the distance and the estimated time remaining to your ﬁnal destination, depending on the option selected.

This symbol appears before you start driving on the route or if you are on a road where navigation guidance cannot be given.

The north up symbol indicates the map with North Up, known as North Up mode.

While in North Up mode, the vehicle icon follows the north direction on the map regardless of which direction the vehicle is traveling. Select this screen symbol to switch between North Up, Heading Up, and 3–D view modes.

The heading up symbol indicates that the vehicle is traveling up on the map and is known as Heading Up mode.

The No GPS symbol appears when your vehicle is acquiring or not receiving a Global Positioning System (GPS) satellite signal.

The shaded triangle indicates the North direction. While in Heading Up mode the direction at the top of the screen and the way the vehicle icon is heading indicates the direction your vehicle is traveling. Select this screen symbol to switch between Heading Up, North Up, and 3–D view modes.

Three-dimensional (3–D) view mode changes the appearance of the map display to a road level view.

See Global Positioning System (GPS) on page 2-40 for more information.

Select the Mark screen button to store the location on the screen in your address book.

The system automatically stores the point in the address book. See “Adding Destinations to the Address Book” under Destination on page 2-14 for more information.

2-9

Displaying Points of Interest (POI) on the Map Screen

Select the POI screen button to display or delete POI icons from the map.

Displaying POI icons on the map lets you know where POIs (e.g. restaurants, gas stations, etc.) are located. This screen appears after selecting the POI screen button.

1. Select one of the POI categories to display or to delete POI icons from the map screen. Once a category has been selected the POI icon displays at the top of the screen.

2. Select up to ﬁve categories to display on the map screen. When a category is selected those POI icons display on the map.

3. Press the POI screen button again to add more POI icons.

More: Select to view more POI categories.

2-10

POI Close to:

1. Once a category has been selected, touch this buttton to display the list of available POIs for the selected POI categories. The list provides the POI icon, the name, the direction, and the distance to the POI from your vehicle’s current position.

2. Use the scroll arrows to move up and down the list.

3. Use the sorting screen buttons: Dist (distance), Icon, Name, and on Route as needed.

Go: Select this screen button, next to the desired POI, to make this POI a destination or a stopover.

Select a POI name to receive information about the POI. From this screen you can select: Address Book, Go,orMap.

Address Book: Press to add this POI to the address book. See “Nav” under Conﬁgure Menu on page 2-29 for information on editing address book entries.

Go: Select to make this POI a destination or a stopover.

Map: Select to display the map showing the location

of the POI.

OK: Select to display the map screen.

Show POI: Select to display or remove the POI icons

from the map screen.

List all Categories: Select to list all POIs sorted alphabetically.

Delete: To delete a speciﬁc POI category, select the category.

Clear All: Select this screen button to clear all selected POI categories.

2-11

Driving on a Route

When a destination has been routed and you are driving on route, the map screen automatically displays the next maneuver.

The pop-up displays the next maneuver direction and how many miles or kilometers you are from it.

When you are approximately 1/4 mi (400 m) from the next maneuver, the screen displays the name and a detailed view of the next maneuver.

2-12

3–D Lane Guidance

Some major metropolitan areas may include a 3–D lane guidance feature for highway exits and junctions. This feature gives you a more vivid representation of the exits and junctions on your route. Cities that include this feature are New York, Los Angeles, Chicago, Detroit, and San Francisco, and may also include Philadelphia, Washington D.C., and other major highway junctions.

Dual Mode

This dual screen symbol displays when the screen is in dual mode.

Dual mode displays the route on half of the screen and a maneuver or turn list on the other half. Press this button to switch between dual screen and full screen which displays the entire route.

Auto Reroute

When your destination is set and you are off the planned route, the system automatically plans a new route and begins to reroute. The new route is highlighted on the screen.

2-13

+ 65 hidden pages