installation guide
electric wall ovens with separate grill
models: EXC614 (S/W), EXC624 (S/W)
oven dimensions
A |
561mm |
546mm |
|
20mm |
|
|
|
B
C
mounting holes
888mm
min. 650mm
881mm
|
A |
B |
C |
595mm |
Flush fit |
600 |
893 |
581 min |
|
Proud fit |
565 |
885 |
560 min |
|
C = from face of cabinet/door to rear of enclosure.
Cabinet construction for your appliance
For the best integration within a kitchen, install this appliance in a standard 600mm wide cupboard that gives a flush fit with the surrounding cupboard fronts. A recess of 20mm is ideal.
It can also be installed using a proud fit with the surrounding cupboard.
Flush fit (top view) |
|
|
Proud fit (top view) |
|
||
|
|
9mm clearance required |
|
|
||
|
|
|
|
565mm |
|
|
Infill panel recessed 20mm |
|
|
|
|
|
|
from external cabinet/door |
|
20mm |
|
|
|
|
to accommodate for a flush fit |
Cupboard door |
Cupboard door |
Cupboard door |
Cupboard door |
||
|
||||||
|
595mm |
|||||
|
|
|
|
|
All measurements in millimetres.
Current as at Dec 2006.
© 2006 Electrolux Home Products Pty Ltd. CDIMEXCOVENS
installation guide
electric underbench ovens with separate grill
models: EGC624 (S/W), EGC634 (S/W)
oven dimensions
A |
|
561mm |
|
|
|
|
B |
546mm |
|
20mm |
|
|
|
C
|
A |
B |
C |
Flush fit |
600 |
731 |
581 min |
Proud fit |
565 |
718 |
560 min |
C = from face of cabinet/door to rear of enclosure.
Cabinet construction for your appliance
mounting
holes
718mm
725mm*
595mm
*Visible front surface from bottom of door to top of control panel = 720mm (to match standard cabinet door height).
720mm module
Benchtop
Infill panel |
Cooker platform |
720mm module |
|
|
Separate grill underbench oven installation requires kitchen kick panel to be rebated (see diagram on the left).
Kick panel
All measurements in millimetres.
Current as at Dec 2006.
© 2006 Electrolux Home Products Pty Ltd. CDIMEGCOVENS
page 1 of 2