How it Works
Chauvet DJ
Loading...
SlimPAR Quad-3 IRC
User manual
19 pgs1.12 Mb0
Table of contents
Loading...

Chauvet DJ SlimPAR Quad-3 IRC User manual

Download
Page 1
User Manual
Page 2
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
Claims ....................................................................................................................................................... 3
2. Introduction ................................................................................................................... 5
3. Setup .............................................................................................................................. 7
Fuse Replacement .................................................................................................................................... 7
Power Linking ............................................................................................................................................ 8
Orientation ................................................................................................................................................. 9
Rigging ...................................................................................................................................................... 9
4. Operation ......................................................................................................................10
Starting Address ...................................................................................................................................... 10
9-Channel ................................................................................................................................................ 11
4-Channel ................................................................................................................................................ 11
Sound-Active Mode ................................................................................................................................. 12
Sound Sensitivity ..................................................................................................................................... 12
Automatic Mode ....................................................................................................................................... 12
Program Speed ....................................................................................................................................... 12
Static Colors ............................................................................................................................................ 13
Custom Color Mixing ............................................................................................................................... 13
Selecting the Dimmer Mode .................................................................................................................... 13
IRC-6 Infrared Remote Control ................................................................................................................ 13
Master/Slave Mode .................................................................................................................................. 15
5. Technical Information ..................................................................................................16
6. Technical Specifications ..............................................................................................17
Contact Us .......................................................................................................................19
Page 2 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 3
What Is

Unpacking
Instructions

and check the container to make sure all the
included accessories) appear damaged from
, damage not related to shipping,
Text
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Critical installation, configuration, or operation information. Not
damage to the product, or cause harm to the operator.

Disclaimer

are subject to change ity for any errors or
and reserves the right to revise or recreate this manual at any time.

1. BEFORE YOU BEGIN

Included

Claims

Conventions
• SlimPAR™ QUAD 3 IRC
• Hanging Bracket with Mounting
Hardware
Carefully unpack the product immediately parts are in the package and are in good condition.
If the box or the contents (the product and shipping, or show signs of mishandling, notify the carrier immediately, not CHAUVET®. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Convention Meaning
Symbol Meaning
• Power Cord
• Warranty Card
• Quick Reference Guide
The information and specifications contained in this User Manual without notice. CHAUVET® assumes no responsibility or liabil omissions, Download the latest version from www.chauvetlighting.com.
© Copyright 2014 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Author Date Editor Date
A. Leon 01/31/14 L. Henry 02/05/14
following these instructions may make the product not work, cause
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
SlimPAR™ QUAD 3 IRC User Manual Page 3 of 19
Page 4
Product at a
x
P
x
P
P
P
P
x
P

Safety Notes

Do not touch the product’s housing when operating because it may be very hot.
This product is not intended for permanent installation.
Glance
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
These notes include important information about the mounting, usage, and maintenance of this product; read before using the product.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the
product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
•
Auto Programs
Auto-ranging Power Supply
Replaceable Fuse
User-Serviceable
• Keep this User Manual for future use. If you sell the product to another user, be
sure to give this document to the next owner.
Page 4 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 5

2. INTRODUCTION

Overview

DMX Out
DMX In
Microphone
Back Panel View
Display
Safety Loop
Power In
Fuse Holder
Control
Buttons
Power Out
SlimPAR™ QUAD 3 IRC User Manual Page 5 of 19
Page 6

Dimensions

8.3 in
210 mm
7.4 in
187 mm
4.3 in
108 mm
Page 6 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 7

AC Power

ranging power supply and it can work with an
circuit breaker, power outlet, and
(circuit breaker or fuse). Make
an appropriate electrical ground to avoid the risk of
a rheostat (variable resistor) or dimmer circuit, even
Fuse
Installed fuse (held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

3. SETUP

The SlimPAR™ QUAD 3 IRC has an auto­input voltage range of 100–240 VAC, 50/60 Hz.
To determine the product’s power requirements ( wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Always connect the product to a protected circuit sure the product has electrocution or fire.
Never connect the product to if the rheostat or dimmer channel serves only as a 0—100% switch.
Replacement
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with another of the same type and rating.
SlimPAR™ QUAD 3 IRC User Manual Page 7 of 19
Page 8

Power Linking

provides power linking via the Edison/IEC outlet located in the back of the
ower Linking
s on 120 VAC or up to
The power linking diagram shown above corresponds to the North American
in other markets, you must
consult with the local CHAUVET® distributor as power linking connectors and
1st Product
2nd Product
3rd Product
Additional Products
The product unit.
P
Diagram
You can power link up to 21 SlimPAR™ QUAD 3 IRC unit 39 SlimPAR™ QUAD 3 IRC units on 230 VAC.
version of the product ONLY! If using the product requirements may differ in your country or region.
Page 8 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 9

Mounting

, read and follow the safety recommendations indicated in
clamps, go to

Orientation

may be mounted in any position; however, make sure
which is appropriate
always consider the length of the
tment when aiming the
way from people
When using onl y one mounting clamp, be sure to use a clamp w ith a captive bolt to
Safety Cable
Bracket Adjustment Knobs
Mounting
Overhead Mounting
Before mounting the product the Safety Notes. For our CHAUVET® line of mounting
www.chauvetlighting.com/cables-clamps-main.html/.
The SlimPAR™ QUAD 3 IRC adequate ventilation is provided around the product.

Rigging

• Before deciding on a location, always make sure there is easy access to the product
for maintenance and programming.
• Make sure that the structure or surface onto which you are mounting the product
can support the product’s weight (see the Technical Specifications
).
• When mounting the product overhead, always use a safety cable (such as CH-05
from CHAUVET®). Mount the product securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The brackets have a 13-mm hole, for this purpose.
• When power linking multiple products, you must
power linking cable and mount the products close enough for the cable to reach.
• The bracket adjustment knobs allow for directional adjus
product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
• The double-bracketed yoke also serves as a floor support. When mounting the
product on the floor, make sure that the product and cables are a and vehicles.
0
Mounting Diagram
Mounting Clamp
Double-Bracketed
Yoke
Floor
prevent accidental loosening.
SlimPAR™ QUAD 3 IRC User Manual Page 9 of 19
Page 10

Control Panel
Operation

To access the control panel functions, use the four buttons located underneath the
<MENU>
<ENTER>

Menu Map

Mode
Programming Steps
Description
Sound
b 0—b255
On
Configuration
When selecting a starting DMX address, always consider the number of DMX channels
choose a starting address that is too high, you could
DMX mode,

4. OPERATION

display.
Button Function
Selects an operation mode or backs out of the current menu option
<UP>
<DOWN>
Scrolls up the list of options or selects a higher value
Scrolls down the list of options or selects a lower value
Activates a menu option or a selected value
DMX
Personalities
and Starting
Address
4-CH
d 1—d512
9-CH
Static Colors C-- C 1—C 15
Auto Programs P-- P 1—P 4
Program Speed S-- S 1—S100
Sound-Active
Mode
Sensitivity
Snd
SenS u 1—u100
Snd1 Snd2
r 0—r255
Custom Color
Mixing
U--
g 0—g255
A 0—A255
OFF
Dimmer Mode dIM
dIM1 dIM2 dIM3
Infrared SET
OFF
Selects the DMX personality and starting address
Selects static color
Selects auto program
Selects auto program speed (slow to fast)
Selects Sound-Active program (4-color)
Selects Sound-Active program (15-color)
Sets sound sensitivity
Red (0—100%)
Green (0—100%)
Blue (0—100%)
Amber (0—100%)
Dimmer, off
Dimmer, fast speed
Dimmer, medium speed
Dimmer, slow speed
Turns infrared on or off
Set the product in DMX mode to control with a DMX controller.
(DMX)
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.

Starting Address

the selected DMX mode uses. If you restrict the access to some of the product’s channels.
The SlimPAR™ QUAD 3 IRC uses up to 9 DMX channels in its 9-channel
which defines the highest configurable address to 504.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the DMX personality and starting address, do the following:
1. Press <MENU> repeatedly until 4-CH (4-channel mode) or 9-CH (9-channel mode)
shows on the display.
2. Press <ENTER> and d 1—d512 shows on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Page 10 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 11

DMX Channel Modes, Assignments, and Values

1
Red
000 ó 255
0 to 100%
2
Green
000 ó 255
0 to 100%
3
Blue
000 ó 255
0 to 100%
4
Amber
000 ó 255
0 to 100%
000 ó 015 016 ó 255
No function Color macros
000 ó 010 011 ó 255
No function Slow to fast
Auto programs speed, slow to fast (when Channel 7 is 032 to 223)
000 ó 031
No function
032 ó 063
0 to 100%
064 ó 095
100% to 0
096 ó 127
100% to 0 to 100%
128 ó 159
Color fade
160 ó 191
4-color snap
192 ó 223
15-color snap
224 ó 255
Sound-Active
8
Dimmer
000 ó 255
0 to 100%
000 ó 051
Dimmer mode manually set in Menu Options
052 ó 101
Dimmer mode off
102 ó 152
Dimmer mode 1 (fast speed)
153 ó 203
Dimmer mode 2 (medium speed)
204 ó 255
Dimmer mode 3 (slow speed)

4-Channel

1
Red
000 ó 255
0 to 100%
2
Green
000 ó 255
0 to 100%
3
Blue
000 ó 255
0 to 100%
4
Amber
000 ó 255
0 to 100%

9-Channel

Channel Function Value Setting
5 Color
Strobe
6
Speed
7 Auto Programs
9 Dim Mode
000 ó 255
Channel Function Value Setting
SlimPAR™ QUAD 3 IRC User Manual Page 11 of 19
Page 12
Configuration
without a DMX
Static, Auto, or
s in
standalone mode may transmit DMX signals that could interfere with the DMX
Sound-Active

Automatic Mode

(Standalone)
Mode
1. Set the product in one of the standalone modes to control
controller.
2. Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode ( Sound-Active) to a DMX string connected to a DMX controller. Product
signals from the controller.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> and Snd1 (4-color) or Snd2 (15-color) shows on the display.
3. Use <UP> or <DOWN> to select the desired Sound-Active program.
4. Press <ENTER>.

Sound Sensitivity

To set the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100).
3. Press <ENTER>.
The product will only respond to low frequencies of music (bass and drums).
To enable the Automatic mode, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P 4 shows on the display.
3. Use <UP> or <DOWN> to select the desired auto program:
• P 1 - 4-color snap
• P 2 - 4-color fade
• P 3 - 15-color snap
• P 4 - 15-color fade
4. Press <ENTER>.

Program Speed

To set the auto program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to select the desired auto program speed S 1–S100 (slow to fast).
3. Press <ENTER>.
Page 12 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 13

Static Colors

Color
Selecting the
IRC-6 Infrared
ontrol
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER> and C 1—C 15 shows on the display.
3. Use <UP> or <DOWN> to select the desired preset color:
4. Press <ENTER>.
Custom
Mixing
Dimmer Mode
Remote Control
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following colors shows on the display: rXXX (red), gXXX (green), bXXX (blue), or AXXX (amber).
3. Press <ENTER> repeatedly to select the desired color.
4. Use <UP> or <DOWN> to select the desired color value (0–255). NOTE: Selecting 0 will turn the color off.
5. Press <ENTER> to select color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
To select the dimmer mode, do the following:
Press <MENU> repeatedly until dIM shows on the display. 1. Press <ENTER> and one of the following shows on the display: 2.
• OFF (dimmer speed off)
• dIM1 (dimmer mode 1, fast speed)
• dIM2 (dimmer mode 2, middle speed)
• dIM3 (dimmer mode 3, slow speed)
Use <UP> or <DOWN> to select the desired dimmer mode. 3. Press <ENTER>. 4.
The SlimPAR™ QUAD 3 IRC is fully compatible with the IRC-6 infrared remote c from CHAUVET®. To enable use with the IRC-6, follow the instructions below:
1. Press <MENU> repeatedly until SET shows on the display.
2. Press <ENTER> and On (turns on the infrared sensor) or OFF (turns off the infrared sensor) shows on the display.
3. Press <UP> or <DOWN> to select the desired option.
4. Press <ENTER>.
SlimPAR™ QUAD 3 IRC User Manual Page 13 of 19
Page 14

IRC-6 (Infrared Remote Control 6) Operation

6 will not respond to any inputs when Black Out is activated.
Note: Make sure to point the IRC-6 directly at the receiver on the product.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
• Press <SOUND> on the IRC-6.
To adjust sound sensitivity in Sound-Active mode:
1. Press <SENSITIVITY> on the IRC-6.
2. Press <%>.
3. Press <+> or <–> to either increase or decrease sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. Press <MANUAL> on the IRC-6.
2. Press any number between <0> and <9> to choose your color.
To manually control the RGBWA+UV percentage:
1. Press <MANUAL> on the IRC-6.
2. Press <R>, <G>, <B>, <W>, <A>, or <UV> (red, green, blue, white,
amber, or ultraviolet) to choose your color.
Note: To use the white, amber, or UV color options, the fixture must be
capable of outputting that corresponding color light.
3. Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To fade the light output:
• Press <FADE> on the IRC-6.
To black out the lights:
• Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the
button is pressed again.
Note: The IRC-
If the remote does not respond when a button is pressed, try pressing
<BLACK OUT>. You may have inadvertently activated Black Out.
(Sold separately, available from CHAUVET®)
Page 14 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 15
Master/Slave
unit (the “master”) to
units (the “slaves”) without
the need of a DMX controller. The master unit will be set to operate in either Automatic
ode. Once
all the slave units before connecting the master unit to the DMX
Never connect a DMX controller to a DMX string configured for Master/Slave
may interfere with the signals from the
The Master/Slave mode allows a single SlimPAR™ QUAD 3 IRC
Mode
control the actions of one or more SlimPAR™ QUAD 3 IRC
or Sound-Active mode, while the slave units will be set to operate in Slave m set and connected, the slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until any DMX personality shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Connect the DMX input of the first slave unit to the DMX output of the master unit.
5. Connect the DMX input of the subsequent slave units to the DMX output of the previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in either Automatic or Sound-Active mode.
2. Make the master unit the first unit in the DMX daisy chain.
• Configure
daisy chain.
•
operation because the controller master unit.
• Do not connect more than 31 slave units to the master unit.
SlimPAR™ QUAD 3 IRC User Manual Page 15 of 19
Page 16
Product
up reduces light output performance and can cause overheating. This can
lead to reduction of the light source’s life and mechanical wear. To maintain optimum
surfaces carefully after

5. TECHNICAL INFORMATION

Dust build-
Maintenance
performance and minimize wear, clean the product at least twice a month. However, usage and environmental conditions contribute to increased cleaning frequency.
To clean the product, follow the instructions below:
• Unplug the product from power.
• Wait until the product is at room temperature.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
• Clean all external optics and glass/transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
• Softly wipe any dirt or grime to the outside edges of the external optics or
glass/transparent surface.
• Gently polish the external optics and glass/transparent surfaces until they are free of
haze and lint.
Always dry the external optics and glass/transparent cleaning them.
Page 16 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 17
Dimensions and
Length
Width
Height
Weight
8.3 in (210 mm)
7.4 in (187 mm)
4.3 in (108 mm)
3.6 lb (1.7 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 VAC, 60 Hz
230 VAC, 50 Hz
Consumption
44 W
46 W
Operating current
0.4 A
0.2 A
Power linking current (units)
8 A (21 units)
8 A (39 units)
Fuse
F 1 A, 250 V
F 1 A, 250 V
Power I/O
US/Canada
UK/Worldwide
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
5 W
50,000 hours
Color
Quantity
Current
Quad-color (RGBA)
3
Photo Optic
Parameter
Illuminance @ 2 m
1065 lux
Beam angle
20°
Field angle
34°
Strobe rate
0–17 Hz
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Sockets
4, 9
Ordering
Product Name
Item Code
UPC Number
SlimPAR™ QUAD 3 IRC
03030738
781462210861

6. TECHNICAL SPECIFICATIONS

Weight
2 A
SlimPAR™ QUAD 3 IRC User Manual Page 17 of 19
Page 18
contact your
instructions on how to return CHAUVET®

Returns

Support office and request a Return
. Be prepared to
provide the model number, serial number, and a brief description of the cause for the
epaid, in its original box, and with its original packing
the following information on a piece of paper
properly. Any shipping damage resulting from inadequate
reserves the right to use its own discretion to repair or replace
To return a product or request support:
• In the U.S., contact CHAUVET® World Headquarters (see below).
• In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below).
• In Mexico, contact CHAUVET® Mexico (see below).
• In any other country, DO NOT contact CHAUVET®. Contact your distributor. See
www.chauvetlighting.com
for distributors outside the U.S., United Kingdom, Ireland,
or Mexico.
If you live outside the U.S., United Kingdom, Ireland, or Mexico, distributor of record and follow their products to them. Visit our website for contact details.
Call the corresponding CHAUVET® Technical Merchandise Authorization (RMA) number before shipping the product
return.
You must send the merchandise pr and accessories. CHAUVET® will not issue call tags.
Clearly label the package with the RMA number. CHAUVET® will refuse any product returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product packaging will be your responsibility. FedEx packing or double-boxing are recommended.
CHAUVET® returned product(s).
Page 18 of 19 SlimPAR™ QUAD 3 IRC User Manual Rev. 2
Page 19
C
WORLD HEADQUA R TERS - CHAUVET®
General Information
Technical Suppor t
www.chauvetlighting.com
UNITED KIN GDOM AND IRE LAND - CHAUVET® Europe Ltd.
General Information
Fax: +44 (0)1773 511110
Technical Suppor t
MEXICO - CHAUVET® Mexico
General Information
Voice: +52 (728) 285-5000
Technical Suppor t
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their instructions to request support or to return a product. Visit our website for contact details.
ONTACT
US
Address:5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084
Address:Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
Address:Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com
World Wide Web
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx
World Wide Web
SlimPAR™ QUAD 3 IRC User Manual5HY Page 19 of 19
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use