How it Works
Chauvet DJ
Loading...
R
S
T
V
Loading...
Loading...
SlimPAR Pro H USB LED Scheinwerfer
User Manual [EN]
19 pgs652.35 Kb0

Chauvet DJ SlimPAR Pro H USB LED Scheinwerfer User Manual [EN]

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
What Is Included ............................................................................................................................. 3
Unpacking Instructions .................................................................................................................... 3
Text Conventions ............................................................................................................................ 3
Symbols .......................................................................................................................................... 3
Disclaimer ....................................................................................................................................... 3
Product at a Glance ........................................................................................................................ 4
Safety Notes .................................................................................................................................... 4
2. Introduction ................................................................................................................... 5
Product Overview ............................................................................................................................ 5
Product Dimensions ........................................................................................................................ 6
3. Setup .............................................................................................................................. 7
AC Power ........................................................................................................................................ 7
Fuse Replacement .......................................................................................................................... 7
Mounting ......................................................................................................................................... 8
Gel Frame Holder ............................................................................................................................ 8
4. Operation ....................................................................................................................... 9
Control Panel Operation.................................................................................................................. 9
Menu Map ....................................................................................................................................... 9
DMX Linking .................................................................................................................................. 10
D-Fi USB Connectivity .................................................................................................................. 10
DMX Channel Assignments and Values ....................................................................................... 11
Configuration (Standalone) ........................................................................................................... 13
IRC-6 Infrared Remote Control ..................................................................................................... 14
Master/Slave Mode (wired) ........................................................................................................... 15
Master/Slave Mode (D-Fi USB) .................................................................................................... 15
5. Maintenance .................................................................................................................16
Product Maintenance .................................................................................................................... 16
6. Technical Specifications ..............................................................................................17
Returns .............................................................................................................................18
Contact Us .........................................................................................................................19
Page 2 of 19 SlimPAR Pro H USB User Manual Rev. 3

What Is
Included

• Gel Frame Holder
• Power Cord

Unpacking
Instructions

Carefully unpack the product im mediately and check the container to make sure all the
If the box or the contents (the product and included accessories) appear dam aged from Failure to report damage to the carrier immediately may invalidate your claim. In
For other issues, such as missing components or parts, damage not related to shipping,
Text
Convention
Meaning
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Symbol
Meaning
Critical installation, configuration, or operation information. Not

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision,
ever, Chauvet has no obligation to make, and does not commit to make, any such
are registered
(d/b/a Chauvet and Chauvet
Other company and product names

1. BEFORE YOU BEGIN

Claims

Conventions
• SlimPAR PRO H USB
• Gel Frame
parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. addition, keep the box and contents for inspection.
or concealed damage, file a claim with Chauvet w it hin 7 days of deliv er y .
Electrical warning. Not following these instructions may cause electrical damage to the product, accessories, or the user.
• Warranty Card
• Quick Reference Guide
how revisions. Download the latest version from www.chauvetlighting.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2016 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo, SlimPAR PRO H USB, and D-Fi USB
trademarks or trademarks of Chauvet & Sons, LLC Lighting) in the United States and other countries. and logos referred to herein may be trademarks of their respective companies.
following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
SlimPAR Pro H USB User Manual Rev. 3 Page 3 of 19
Product at a
x
P
x
P
P
P
P
x
P

Safety Notes

Glance
Use on Dimmer Outdoor Use Sound-Active DMX Master/Slave
Please read the following Safety Notes carefully before working with the product. The Notes include important safe ty infor mat ion abou t instal lation, usage, and maintenance.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent ris k of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housin g are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assist ance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Auto Programs Auto-ranging Power Supply Replaceable Fuse User-Serviceable
Keep this User Manual for future use. If you sell the product to someone else, be sure that they also receive this document.
Page 4 of 19 SlimPAR Pro H USB User Manual Rev. 3

Product Overview

DMX In/Out
Power In
Microphone
D-Fi USB
Port
Power Out
Safety Cable
Pass-Through
Fuse Holder
Display
Menu Buttons
Back Panel View
Front View
Lenses
IR Sensor

2. INTRODUCTION

WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may cause damage to the product.
SlimPAR Pro H USB User Manual Rev. 3 Page 5 of 19

Product Dimensions

10 in
253 mm
11.4 in
290 mm
3.9 in
98 mm
Page 6 of 19 SlimPAR Pro H USB User Manual Rev. 3

AC Power

ranging power supply and it can work with an
circuit breaker, power outlet, and wiring), use the current value listed on
’s average current draw under normal
to a rheostat (variable resistor) or dimmer circuit, even
Fuse
1. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
4. Insert the fuse holder back in place and reconnect power.
outlet located in the back of the

Power Linking

in other markets, you must consult with the
distributor as power linking connectors and requirements may
Installed fuse (held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap
1st Product
2nd Product
3rd Product
Additional
Products

3. SETUP

Replacement
The SlimPAR P RO H USB has an auto­input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the product’s power requirements ( the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product conditions.
• Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
Never connect the product if the rheostat or dimmer channel serves only as a 0 to 100% switch.
2. Pry the fuse holder out of the housing.
3. Remove the blown fuse from the holder and replace with a fuse of the exact same type and rating.
Disconnect the product from the power outlet before replacing the fuse.
Power Linking
Diagram
The product provides power linking via the Edison product. Please see the diagram below for further explanation.
You can power link up to 5 SlimPAR PRO H USB products on 120 VAC or up to 10 SlimPAR PRO H USB products on 230 VAC.
The power linking diagram corresponds to the North American version of the product ONLY! If using the product
SlimPAR Pro H USB User Manual Rev. 3 Page 7 of 19
local Chauvet differ in your country or region.

Mounting

, read and follow the safety recommendations indic ated in
may be mounted in any position; however, make sure

Gel Frame
Holder

7.5 inch barn
Mounting Clamp
Chauvet)
Bracketed Yoke
Bracket Adjustment
Knob x 2
Before mounting the product the Safety Notes.

Orientation

Rigging

Mounting Diagram
The SlimPAR PRO H USB adequate ventilation is provided around the product.
• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the product’s weight. See the Technical Specifications for weight information.
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products clo se enoug h for power linking cables to reac h.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Safety Cable
(such as CH-05 from
Chauvet)
(such as the CLP-15N from
Double-
The SlimPAR PRO H USB c omes with a gel frame and a gel frame holder, which can be attached with the included screws. The gel frame holder can easily fit doors, such as the Ovation 7.5” Barndoor from CHAUVET Professional.
Page 8 of 19 SlimPAR Pro H USB User Manual Rev. 3
Gel Frame
or
7.5” Barn doors

Control Panel
Operation

To access the control panel functions, use the four buttons located underneath the
on the control
Button
Function
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value

Menu Map

Main Level
Programming Levels
Description
6-CH
d001–512
6-channel DMX mode
7-CH
d001–512
7-channel DMX mode
12CH
d001–512
12-channel DMX mode
C--
C1–63
Static colors
P1
P2
6-color program (pulse)
P3
32-color program (snap)
P4
S--
S--1–100
Program speed for P1–P4
Snd1
6-color program (sound-active)
Snd2
32-color program (sound-active)
SenS
u--0–100
Sound sensitivity setting
r000–255
(red)
g000–255
(green)
b000–255
(blue)
A000–255
(amber)
W000–255
(white)
P000–255
(UV)
OFF
dIM1
dIM2
dIM3
On
OFF

4. OPERATION

display. Please refer to the Product Overview to see the button locations panel.
<MENU>
6-color program (snap)
P--
(automatic)
32-color program (fading)
Snd
(sound-active)
U--
dIM
SEr
Custom static colors Combine red, green, blue, amber, white, and UV
Dimmer speed mode, fast to slow, or off
IR function on or off
SlimPAR Pro H USB User Manual Rev. 3 Page 9 of 19

DMX Linking

USB works with a DMX controller. Information about DMX is in the
Configuration
socket on the product.
D-Fi USB
om Chauvet DJ. Simply set the product's DMX Personality and
Fi USB into the USB port. Doing
Fi USB will take over the product. Wired DMX, manual
display control / menu buttons and IRC will be unavailable until you unplug the
Configuration
1. Set the DMX Personality and DMX address on your product.
RECEIVING
TRANSMITTING
Connectivity
(DMX)
The SlimPAR PRO H CHAUVET DMX Primer, which is available from the Chauvet website
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
The SlimPAR PRO H USB is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB fr DMX Address, set the DIP switch D-Fi receiving/transmitting channel, then plug it into the D-Fi USB port.
WARNING! DO NOT plug anything other than a D­so may cause damage to the product.
Once plugged in, the D­D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. IRC-6 Remote Control
4. Manual Digital Display/Menu Buttons
(D-Fi USB)
D-Fi USB DIP Switch
Channels
2. Use the Chart provided to s et BOTH:
• the Channel, and then
• the Receiving or Transmitting option.
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
Page 10 of 19 SlimPAR Pro H USB User Manual Rev. 3
DMX Personality
Starting
When selecting a starting DMX address, always consider the number of DMX channels
selected DMX mode uses. If you choose a starting address that is too high, you
CH DMX mode, which
If you are not familiar with the DMX protocol, download the DMX Primer from
4. Press <ENTER>.

DMX Channel Assignments and V alues

Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó 255
0–100%
Red
3
Green
000 ó 255
0–100%
4
Blue
5
Amber
000 ó 255
0–100%
White
7
UV
000 ó 255
0–100%
000 ó 015
No function
000 ó 015
No function
016 ó 255
Color macros
000 ó 031
No function
032 ó 063
Pulse effect 0–100%
064 ó 095
Pulse effect 100%–0
096 ó 127
Pulse effect 100%–0–100%
128 ó 159
Auto fade transition
160 ó 191
Auto snap transition (6 colors)
192 ó 223
Auto snap transition (32 colors)
250 ó 255
Sound-active mode (32 colors)
Speed (when CH10 is 032–223)
000 ó 010
Off
000 ó 051
Default dimmer speed set from menu
052 ó 101
Dimmer speed mode off
102 ó 152
Dimmer speed mode 1 (fast speed)
153 ó 203
Dimmer speed mode 2 (medium speed)
204 ó 255
and
Address

12CH

the could restrict the access to some of the product’s channels.
The SlimPAR PRO H USB uses up to 12 DMX channels in a 12 defines the highest configurable address to 501.
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 6-CH, 7-CH, or 12CH shows on the display.
2. Press <ENTER> and d 1–512 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
2
6
000 ó 255
000 ó 255
000 ó 255
0–100%
0–100%
0–100%
8
Strobe
Color Macros
9
(Overrides Ch. 2–7)
10
Mode
11
016 ó 255 Strobe, slow to fast
224 ó 249
000 ó 255 Slow to fast
Sound Sensitivity (when CH10 is 224–255)
12
Dimmer Speed
011 ó 255 Control the sound sensitivity level
CH2~7 must be active
Sound-active mode (6 colors)
Dimmer speed mode 3 (slow speed)
SlimPAR Pro H USB User Manual Rev. 3 Page 11 of 19
Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó 255
2
Red
000 ó 255
0–100%
Green
4
Blue
0–100%
5
Amber
000 ó 255
6
White
000 ó 255
0–100%
UV

6-CH

Channel
Function
Value
Percent/Setting
Red
2
Green
000 ó 255
0–100%
3
Blue
4
Amber
000 ó 255
0–100%
White
6
UV
000 ó 255
0–100%

7-CH

0–100%
3
7
1
5
000 ó 255 000 ó 255
000 ó 255
000 ó 255
000 ó 255 0–100%
000 ó 255
0–100%
0–100%
0–100%
0–100%
0–100%
Page 12 of 19 SlimPAR Pro H USB User Manual Rev. 3

Configuration
(Standalone)

Automatic
4. Press <ENTER>.
Program
3. Press <ENTER>. The product will return to the last selected mode.
4. Press <ENTER>.
, follow the instructions
3. Press <ENTER>. The product will return to the last selected mode.
Preset Color
4. Press <ENTER>.
Custom Color
5. Repeat steps 3 and 4 until the product outputs as desired.

Dimmer Speed

4. Press <ENTER>.
Set the product in one of the standalone modes to c ontrol without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.
To run the SlimPAR PRO H USB in automatic mode, follow the instructions below:
Programs
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select an auto program (P1–4).
Auto-
Speed
Sound-Active
Mode

Sound Sensitivity

Mode
Mixing
To change the auto-program speed on the SlimPAR PRO H USB, do the following:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> and <DOWN> to increase or decrease the program speed (S--1–100).
To run the SlimPAR PRO H USB in sound-active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select a sound-active program (Snd1 or Snd2).
The product will only respond to low frequencies of music (bass and drums).
To change the sound sensitivity on the SlimPAR PRO H USB below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> and <DOWN> to increase or decrease the sound sensitivity (u--0–100).
To run the SlimPAR PRO H USB in preset color mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select a static color (C1–63).
To custom mix a static color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following will show on the display:
• r_ _ _ (red)
• g_ _ _ (green)
• b_ _ _ (blue)
• A_ _ _ (amber)
• W_ _ _ (white)
• P_ _ _ (UV)
3. Press <ENTER> to cycle through the color settings.
4. When the desired color shows on the display, use <UP> or <DOWN> to increase or decrease the color value.
To change dimmer speed on the SlimPAR PRO H USB, do the following:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER>.
3. Use <UP> and <DOWN> to select:
• dIM1 (fast)
• dIM2 (medium)
• dIM3 (slow)
or
• OFF.
SlimPAR Pro H USB User Manual Rev. 3 Page 13 of 19
IRC-6 Infrared
Remote
6 infrared remote control from
4. Press <ENTER>.

IRC-6 Operation

6 will not respond to any inputs when Black Out is activated. If the
. You
Page 14 of 19 SlimPAR Pro H USB User Manual Rev. 3
Control
The SlimPAR PRO H USB is compatible with the IRC­Chauvet. To activate IR mode, follow the instruc tions below:
1. Press <MENU> repeatedly until SEr shows on the display.
2. Press <ENTER> to accept.
3. Press <UP> or <DOWN> to select On or OFF.
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product. To turn on Automatic mode:
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to choose between the different auto programs.
To adjust the speed of the automatic program:
1. Press <SPEED> on the IRC-6.
2. Press <+> or <–> to increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music. To turn on Sound-Active mode:
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to
select Snd1 or Snd2.
To adjust sound sensitiv ity in Sound-A ctiv e mode :
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sound sensitivity.
Manual Color Control
To choose a specific color with the IRC-6:
1. Press <MANUAL> on the IRC-6.
2. Press any number between <0>~<9> to choose your color.
To manually control the RGB percentage:
1. Press <MANUAL> on the IRC-6.
2. Press <R> (red), <G> (green), <B> (blue), <A> (amber), <UV>/<P> (UV), or <W> (white) to choose your color.
3. Press <+> or <–> to increase or decrease the percentage of each color.
Miscellaneous Operation
To adjust the total output level:
1. Press <%> on the IRC-6.
2. Press <+> or <–> to increase or decrease the output level.
To adjust the strobe rate of the program:
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe rate.
3. Press <STROBE> again to turn off the strobe.
To select only fading programs:
1. Press <FADE> on the IRC-6.
2. Press <+> or <–> to
select P2 or P4.
To black out the lights:
1. Press <BLACK OUT> on the IRC-6.
This will turn off all the lights until the button is pressed again. NOTE: The IRC-
remote does not respond when a button is pressed, try pressing <BLACK OUT> may have inadvertently activated Black Out.
Master/Slave
USB product (the “master”) to
USB products (the “slaves”) without
6, while the slave products will be set to operate in Slave
ucts will operate in unison with the
2. Make the master product the first product in the DMX daisy chain.
Master/Slave
USB products (the “slaves”) without the need of
a DMX controller or DMX cables. The master (transmitter) product will be set to operate
6, while the slave (receiver) products will be
6. Plug in the D-Fi USB.
The Master/Slave mode allows a single SlimPAR PRO H
Mode
(wired)
control the actions of one or more SlimPAR PRO H the need of a DMX controller. The m aster product will be set to operate in either Stand­Alone mode or with the IRC­mode. Once set and connected, the slave prod master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 6-CH, 7-CH, or 12CH shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Connect the DMX input of the first slave product to the DMX output of the master product.
5. Connect the DMX input of the subsequent slave products to the DMX output of the previous slave product.
6. Finish setting and connecting all the slave products.
Master product:
1. Set the master product to operate in either Stand-Alone mode or with the IRC-6.
• Configure all the slave products before connecting the master to the daisy chain.
• Never connect a DMX controller to a DMX string configured for Master/Slave operation because the controller may interfere with the signals from the master.
• Do not connect more than 31 slaves to the master.
The D-Fi USB allows a single SlimPAR PRO H USB product (the “master”) to control the actions of one or more SlimPAR PRO H
Mode
(D-Fi USB)
in either Stand-Alone mode or with the IRC­set to operate in Slave mode. Once set and connected, the slave products wil l operate in unison with the master product.
Configure the products as indicated below.
Slave products:
1. Press <MENU> repeatedly until 6-CH, 7-CH, or 12CH shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Set the D-Fi USB to receive on a specific channel, 1–16.
5. Plug in the D-Fi USB.
6. Finish setting and connecting all the slave products.
Master product:
1. Press <MENU> repeatedly until the DMX personality the slaves are set to shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to d 1.
4. Set the master product to operate in either Stand-Alone mode or with the IRC-6.
5. Set the D-Fi USB to transmit on the D-Fi channel the slaves are receiving on.
• All products must be set to the same DMX personality, DMX address, and D-Fi channel.
• Configure all the slave products before configuring the master to transmit.
• Never connect a DMX controller to a D-Fi channel configured for Master/Slave
operation because the controller may interfere with the signals from the master.
SlimPAR Pro H USB User Manual Rev. 3 Page 15 of 19
Product
This can
mechanical wear. To maintain optimum
s at least twice a month.
7. Gently polish the tran spar ent s ur fac es until they are free of haze and lint.

5. MAINTENANCE

Dust build-up reduces light output performance and can cause overheating.
Maintenance
lead to reduction of the light source’s life and/or performance and minimize wear, clean your lighting product However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the tr a nsp arent surface.
Always dry the transparent surfaces carefully after cleaning them.
Page 16 of 19 SlimPAR Pro H USB User Manual Rev. 3
Dimensions and
Length
Width
Height
Weight
10 in (253 mm)
3.9 in (98 mm)
11.4 in (290 mm)
7.2 lb (3.3 kg)
Note
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 VAC, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
99 W
96 W
Operating Current
1.4 A
0.8 A
Power linking current
(products)
Fuse
F 2 A, 250 V
F 2 A, 250 V
Power I/O
U.S./Worldwide
UK/Europe
Power input connector
IEC
IEC
Power output connector
Edison
IEC
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
10 W
50,000 hours
Color
Quantity
Current
Hex-color RGBAW+UV
12
2.4 A
Photometrics
Parameter
Value
Strobe Rate
0 to 31 Hz
Beam Angle
24°
Field Angle
41°
Illuminance @ 2 m
3,218 lux
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
DMX
I/O Connectors
Channel Range
3-pin XLR
6, 7 or 12
Ordering
Product Name
Item Code
UPC Number
SlimPAR PRO H USB (black)
03031132
781462214807
SlimPAR PRO H USB (white)
03031280
781462216283

6. TECHNICAL SPECIFICATIONS

Weight
: Dimensions in inches rounded to the nearest decimal digit.
8 A (5 products) 8 A (10 products)
SlimPAR Pro H USB User Manual Rev. 3 Page 17 of 19
R
ou are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your
distributor of record and follow their instructions on how to return Chauvet
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to
of the cause for the
Send the merchandise prepaid, in its original box, and with its original packing and
Clearly label the package with the RMA number. Chauvet will refuse any product
Write the RMA number on a properly affixed label. DO NOT write the RMA number
Before sending the product, clearly write the following information on a piece of paper
amage resulting from inadequate
boxing are
Chauvet reserves the right to use its own discretion to repair or replace returned
ETURNS
In case you need to get support or return a product:
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux.
If y products to them. Visit our website www.chauvetlighting.com for contact details.
provide the model number, serial number, and a brief description return.
To submit a service request online, go to www.chauvetdj.com/service-request.
accessories. Chauvet will not issue call tags.
returned without an RMA number.
directly on the box.
and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping d packaging will be your responsibility. FedEx packing or double­recommended.
product(s).
Page 18 of 19 SlimPAR Pro H USB User Manual Rev. 3
C
USA WORLD HEADQUARTERS
General Information – Chauvet
Technical Support
www.chauvetlighting.com
EUROPE
General Information
Technical Support
General Information.
Technical Support
MEXICO
General Information
Voice: +52 (728) 285-5000
Technical Support
www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record. Follow their instructions to request support or to return a product. Visit our website for contact details.
ONTACT
US
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084
Address: Stokstraat 18 9770 Kruishoutem Belgium Voice: +32 9 388 93 97
Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110
Voice: (844) 393-7575 Fax: (954) 756-8015 Email: chauvetcs@chauvetlighting.com
World Wide Web
Email: Eutech@chauvetlighting.eu
World Wide Web
www.chauvetlighting.eu
Email: uktech@chauvetlighting.com
World Wide Web
www.chauvetlighting.co.uk
Address: Av. de las Partidas 34 - 3B, Zona Industrial Lerma Lerma, Edo. de México, CP 52000
SlimPAR Pro H USB User Manual Rev. 3 Page 19 of 19
Email: servicio@chauvet.com.mx
World Wide Web
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use