How it Works
Chauvet DJ
Loading...
O
P
Q
R
S
Loading...
Loading...
SlimPANEL Tri 24 IP
Users Manual
18 pgs547.8 Kb0
Table of contents
Loading...

Chauvet DJ SlimPANEL Tri 24 IP Users Manual

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
Claims ..................................................................................................................................................... 3
2. Introduction ................................................................................................................... 5
3. Setup .............................................................................................................................. 7
Power Linking ......................................................................................................................................... 7
Orientation .............................................................................................................................................. 8
Rigging ................................................................................................................................................... 8
4. Operation ....................................................................................................................... 9
DMX Personalities and Starting Address ............................................................................................. 10
3-CH ..................................................................................................................................................... 11
4-CH ..................................................................................................................................................... 11
5-CH ..................................................................................................................................................... 11
9-CH ..................................................................................................................................................... 12
Automatic Mode .................................................................................................................................... 13
Static Color Mode ................................................................................................................................. 13
Custom Static Color Mode .................................................................................................................... 13
Dimmer Adjustment .............................................................................................................................. 13
Touch Control Panel Lock .................................................................................................................... 14
Master/Slave Mode ............................................................................................................................... 14
5. Technical Information ..................................................................................................15
6. Technical Specifications ..............................................................................................16
Contact Us ........................................................................................................................18
Page 2 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)

1.BEFORE YOU BEGIN

What Is

Unpacking
Instructions

to make sure
included accessories) appear damaged from
Failure to do so in a timely manner may invalidate your claim with the carrier.
For other issues such as missing components or parts, damage not related to shipping,
within 7 days of receiving the
Text
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Critical installation, configuration, or operation information. Failure damage it, or cause harm to the operator.
Important installation or configuration information. Failure to properly.

Disclaimer

respects. However, Chauvet assumes no responsibility and specifically disclaims any
Included

Claims

Conventions
• SlimPANEL TRI 24 IP
• DMX In Adapter
• DMX Out Adapter
Immediately upon receipt, carefully unpack the product and check the box you have received all the parts indicated above in good condition.
If the box or the contents (the product and shipping, or show signs of mishandling, upon receipt notify the carrier immediately, not Chauvet. In addition, keep the container and all the packing material for inspection.
or concealed damage, file a claim with Chauvet merchandise.
Convention Meaning
Symbol Meaning
• Power Cord
• Warranty Card
• Quick Reference Guide
to comply with this information may cause the product to not work,
comply with this information may prevent the product from working
Useful information.
Chauvet believes that the information contained in this manual is accurate in all and all liability to any party for any loss, damage or disruption caused by any errors or
omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest v ersion from www.chauvetlighting.com.
The works of authorship contained in this manual, including, but not limited to, all design, text and images are owned by Chauvet.
© Copyright 2015 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America. CHAUVET, the Chauvet logo and “SlimPANEL TRI 24 IP” are registered trademarks
or trademarks of Chauvet & Sons LLC. (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 3 of 18
Product at a
x
P
P
P
x
x
P
x
P
x

Safety Notes

Do not touch the product’s housing when operating because it may be very hot.
center.
Glance
Use on Dimmer Outdoor Use Sound Activated DMX Master/Slave
Please read the following Safety Notes carefully before working with the product. The Notes include important safe ty infor mat ion abou t installation, usage, and maintenance.
• Always connect the product to a GFI (ground fault interrupter) circuit to avoid the risk of electrocution.
• To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from power via breaker or by unplugging it.
• Always disconnect the product from the power source before cleaning.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• This product is for indoor or temporary outdoor use (IP65). Do not expose to harsh or excessively corrosive environmental conditions (whether indoors or outdoors), including, but not limited to, extreme temperatures, humidity, atmospheric conditions (including salinity or pressure), radiation (UV, infrared or nuclear), shock and conditions which exceed the product’s Ingress Protection (“IP”) rating. Do not submerge this product.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same ty pe and rat ing .
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
Auto Programs Auto-ranging Power Supply Replaceable Fuse User Serviceable Duty Cycle
Keep this User Manual for future consultation. If you sell the product to another user, be sure that they also receive this document.
Page 4 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)

2. INTRODUCTION

Product Overview

Touch Display
Power Out
DMX Out
Power In
DMX In
Mounting Bracket
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 5 of 18

Product Dimensions

Page 6 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)

AC Power

ranging power supply and it can work with an
circuit breaker, power outlet, and
(circuit breaker or fuse).
an appropriate electrical ground to avoid the risk of
a rheostat (variable resistor) or dimmer circuit, even
the back of the
If you choose not to use the power linking feature, be sure to use the included screw on
to the North American version
in other markets, you must consult with
distributor as power linking connectors and requirements may

3. SETUP

Power Linking

The SlimPANEL TRI 24 IP has an auto­input voltage range of 100–240 VAC, 50/60 Hz.
To determine the product’s power requirements ( wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit
Make sure the product has electrocution or fire.
• To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Never connect the product to if the rheostat or dimmer channel serves only as a 0 to 100% switch.
The product provides a power linking option via the pigtails located on unit.
You can daisy chain up to 6 units on 120 VAC or up to 12 units on 230 VAC.
The power linking information above corresponds of the product ONLY! If using the product the local Chauvet differ in your country or region.
cap to prevent any water from getting into the power cords.
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 7 of 18

Mounting

, read and follow the safety recommendations indicated in
may be mounted in any position; however, make sure
can support
section of this manual
Mount the
always consider the length of the
). Do not expose to harsh or excessively corrosive environmental conditions (whether indoors or outdoors), including, but not limited to, extreme temperatures, humidity, atmospheric
n (UV, infrared or nuclear), shock
and conditions which exceed the product’s Ingress Protection (“IP”) rating. Do not
Bracket Adjustment
Mounting Bracket
Before mounting the product the Safety Notes.

Orientation

Rigging

Mounting Diagram
The SlimPANEL TRI 24 IP adequate ventilation is provided around the product.
• Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product the product’s weight. Please see the Technic a l S pe c ifi ca t io ns for weight information.
• When mounting the product overhead, always use a safety cable. product securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
• When po wer linking m ultiple products, you must power linking cable and mount the products close enough for the cable to reach.
• This product is for indoor or outdoor use (IP65
conditions (including salinity or pressure), radiatio submerge this product.
Page 8 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)
Control Panel
To access the control panel functions, use the four buttons located underneath the
on the control

Menu Map

4CH
OFF
C1
C4
ON
P1
P4

4. OPERATION

Operation
display. Please refer to the Product Overview to see the button locations panel.
Button Function
<MENU>
<UP>
<DOWN>
<ENTER>
Mode Programming Steps Description
DMX Address Addr d__1-d512
DMX
Personalities
Dimmer DIM
Static Color C--
Touch Control
Panel Lock
Custom Color
Mixing
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value Press to scroll down the list of options or to find a lower value Press to activate a menu option or a selected value
Selects DMX starting address
3CH
PRES
PASS
U--
5CH 9CH
DIM1 DIM2 DIM3
C2 C3
C5 C6 C7
OFF
r-­g-­b-­S--
Selects DMX personality
Change dimmer speed
Red Green Blue Cyan Magenta Yellow White
Locks touch control panel Passcode is UP,DOWN,UP,DOWN,ENTER
Red Green Blue Strobe rate
P2
Auto Programs P--
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 9 of 18
P3
P5
S__1-
S100
Auto program selection and speed selection
Configuration
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
DMX
Starting
channel mode for basic
When selecting a starting DMX address, always consider the number of DMX channels
Set the product in DMX mode to control with a DMX controller.
(DMX)
Personalities
and
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. socket on the product.
The SlimPANEL TRI 24 IP has 4 DMX personalities, from a 3­control to a 9-channel mode with more advanced control over the lights.
The SlimPANEL TRI 24 IP uses up to 9 DMX channels in its 9-channel DMX mode, which defines the highest configurable address to 504.
Address
the selected DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels.
If you are not familiar with the DMX protocol, download the DMX Primer at
www.chauvetlighting.com.
To select the DMX personality, do the following:
1. Press <MENU> repeatedly until PERS shows on the display.
2. Use <UP> or <DOWN> to select 3CH, 4CH, 5CH or 9CH.
3. Press <ENTER> to choose your DMX personality when it appears on the display.
To then choose your starting address:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Page 10 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)

DMX Channel Assignments and V alues

1
Red
000 ó 255
0–100%
2
Green
000 ó 255
0–100%
3
Blue
000 ó 255
0–100%
1
Dimmer
000 ó 255
0–100%
2
Red
000 ó 255
0–100%
3
Green
000 ó 255
0–100%
4
Blue
000 ó 255
0–100%
1
Red
000 ó 255
0–100%
2
Green
000 ó 255
0–100%
3
Blue
000 ó 255
0–100%
4
Dimmer
000 ó 255
0–100%
000 ó 010
No function
011 ó 255
Slow to fast

3-CH

4-CH

5-CH

Channel Function Value Setting
Channel Function Value Setting
Channel Function Value Setting
5 Strobe
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 11 of 18
1
Dimmer
000 ó 255
0–100%
2
Red
000 ó 255
0–100%
3
Green
000 ó 255
0–100%
4
Blue
000 ó 255
0–100%
000 ó 010
No function
011 ó 200
Color Macros
201 ó 205
White 1: 3200K
206 ó 210
White 2: 3400K
211 ó 215
White 3: 4200K
216 ó 220
White 4: 4900K
221 ó 225
White 5: 5600K
226 ó 230
White 6: 5900K
231 ó 235
White 7: 6500K
236 ó 240
White 8: 7200K
241 ó 245
White 9: 8000K
246 ó 250
White 10: 8500K
251 ó 255
White 11: 10000K
000 ó 009
No function
010 ó 255
0–100% (slow to fast)
000 ó 051
No function
052 ó 101
Auto Program 1
102 ó 152
Auto Program 2
153 ó 203
Auto Program 3
204 ó 254
Auto Program 4
255
Auto Program 5
8
Auto Program Speed
000 ó 255
Slow to fast (when Ch. 7 is 052–255)
000 ó 051
Default speed
052 ó 101
Linear dimmer
102 ó 152
Nonlinear dimmer 1
153 ó 203
Nonlinear dimmer 2
204 ó 255
Nonlinear dimmer 3

DMX Channel Assignments and V alues (cont.)

9-CH

Channel Function Value Setting
5 Color Macros
6 Strobe
7 Auto Programs
9 Dimmer Curve
Page 12 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)
Configuration
that is operating in any standalone mode to a DMX string
s in standalone mode may transmit DMX
Custom Static
Dimmer
You can manually control the dimmer speed to suit any need. To set up your preferred
(Standalone)

Automatic Mode

Static Color Mode

Color Mode
Set the product in one of the standalone modes to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product connected to a DMX controller. Product signals that could interfere with the DMX signals from the controller.
To enable the Automatic Mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose an auto program (P1-P5).
4. Press <ENTER> to adjust the speed of the program.
5. Use <UP> or <DOWN> to adjust the duration of each step of the automatic program from S__1 (fast) to S100 (slow).
6. Press <ENTER>.
To enable the Static Color Mode, follow the instructions below:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose a color (C1-C7).
4. Press <ENTER>.
To enable the Custom Static Color Mode, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> to choose between colors (r--, g--, b--).
3. Press <UP> or <DOWN> to choose the intensity of the color (000-100).
4. Repeat the steps to mix additional colors to create the color you need.
5. Press <ENTER>.
You can also manually adjust the strobe rate. To do so, do the following:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> until S-- shows on the display.
3. Press <UP> or <DOWN> to choose the strobe rate (S 0-S 20).
4. Press <ENTER> once you have chosen your desir ed strob e r ate.
Adjustment
dimmer speed, do the following:
1. Press <MENU> repeatedly until DIM shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to choose between the dimming types (OFF-DIM3).
4. Press <ENTER>.
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 13 of 18
Touch Control
shows on the display to enable the touch panel
to disable the touch panel
In situations where water may flow onto the touch display, use the Touch Panel Control
Master/Slave
unit (the “master”) to
units (the “slaves”) without the
e. Once set and connected, the
Connect the DMX input of the subsequent slave units to the DMX output of the
all the slave units before connecting the master unit to the daisy
Never connect a DMX controller to a DMX string configured for Master/Slave
may interfere with the signals from the
To enable the touch panel lock, follow the instructions below:
Panel Lock
1. Press <MENU> repeatedly until PASS shows on the display.
2. Press <ENTER>.
3. Press <UP> or <DOWN> until ON lock.
To disable the touch panel lock so you can resume functionality, follow the steps below:
1. Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER> lock.
2. Press <MENU> to move through the menus as normal.
Lock so that the water does not reset the product’s settings.
The Master/Slave mode allows a single SlimPANEL TRI 24 IP
Mode
control the actions of one or more SlimPANEL TRI 24 IP need of a DMX controller. The master unit will be set to operate in a standalone mode, while the slave units will be set to operate in Slave Mod slave units will operate in unison with the master unit.
Configure the units as indicated below.
Slave units:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Press <ENTER> to accept.
3. Set the DMX address to 001.
4. Connect the DMX input of the first slave unit to the DMX output of the master unit.
5. previous slave unit.
6. Finish setting and connecting all the slave units.
Master unit:
1. Set the master unit to operate in standalone mode.
2. Make the master unit the first unit in the daisy chain.
• Configure
chain.
•
operation because the controller master unit.
• Do not connect more than 31 slave units to the master unit.
Page 14 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)
Product
up reduces light output performance and can cause overheating. This can
To maintain optimum performance and
surfaces carefully after

5. TECHNICAL INFORMATION

Dust build-
Maintenance
lead to reduction of the light source’s life. minimize wear, you should clean your lighting products at least twice a month. However, use and environmental conditions contribute to incr eased cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface/vents.
4. Clean all external optics and glass/transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the external optics or glass/transparent surface.
7. Gently polish the external optics and glass/transparent surfaces until they are free of haze and lint.
Always dry the external optics and glass/transparent cleaning them.
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 15 of 18
Dimensions and
Length
Width
Height
Weight
10.5 in (268 mm)
11.9 in (301 mm)
5.3 in (134 mm)
13.8 lbs (6.2 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100–240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
82 W
81 W
Operating
1.2 A
0.7 A
Power linking current (units)
8 A (6 units)
8 A (12 units)
Power I/O
U.S./Worldwide
UK/Europe
Power input connector
Proprietary
Proprietary
Power output connector
Proprietary
Proprietary
Power Cord plug
Edison (U.S.)
Local plug
Light Source
Type
Power
Lifespan
LED
3 W
50,000 hours
Color
Quantity
Current
Tri-color
24
350 mA (x3)
Photometrics
Parameter
Illuminance @ 2 m
5,850 lux
Beam angle
20º
Field angle
34°
Thermal
Maximum External Temp.
Minimum Startup Te mp.
Cooling System
113° F (45° C)
-4° F (-20° C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3-pin XLR
Proprietary
3, 4, 5 or 9
Ordering
Product Name
Item Code
UPC Number
SlimPANEL TRI 24 IP
03030532
781462208806

6. TECHNICAL SPECIFICATIONS

Weight
Page 16 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)
In case you need to get support or return a product:
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux, contact your distributor of record and follow their instructions on how to return Chauvet

Returns

Tech Support office and request a Return Merchandise
. Be prepared to provide the
You must send the merchandise prepaid, in its original box, and with its original packing
the following information on a piece of paper
properly. Any shipping damage resulting from inadequate
reserves the right to use its own discretion to repair or replace returned
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux.
products to them. Visit our website www.chauvetlighting.com for contact details.
Call the corresponding Chauvet Authorization (RMA) number before shipping the product model number, serial number, and a brief description of the cause for the return.
and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product
returned without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write and place it inside the box:
• Your name
• Your address
• Your phone number
• The RMA number
• A brief description of the problem
Be sure to pack the product packaging will be your responsibility. As a suggestion, proper UPS packing or double­boxing is always a safe method to use.
Chauvet product(s).
SlimPANEL TRI 24 IP User Manual (Rev. 6) Page 17 of 18
C
USA WORLD HEADQUARTERS
General Information
Technical Support
EUROPE
General Information - Chauvet Euro pe BVBA
Technical Support
General Information - Chauvet Europe Ltd.
Technical Support
MEXICO
General Information - Chauvet Mexico
Voice: +52 (728) 285-5000
Technical Support
Outside the U.S., United Kingdom , Ireland, Mexico, or Benelux c ontact the dealer of record.
ONTACT
US
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560 Toll free: (800) 762-1084
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com
World Wide Web www.chauvetlighting.com
Address: Stokstraat 18 9770 Kruishoutem Belgium
Email: Eutech@chauvetlighting.eu
World Wide Web www.chauvetlighting.eu
Voice: +32 9 388 93 97
Address: Unit 1C Brookhill Road Industrial Estate Pinxton, Nottingham, UK
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
NG16 6NT Voice: +44 (0)1773 511115 Fax: +44 (0)1773 511110
Address: Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000
Email: servicio@chauvet.com.mx World Wide Web www.chauvet.com.mx
Follow their instruct ions to request support or t o return a product. Visi t o ur webs ite f or c ontac t details.
Page 18 of 18 SlimPANEL TRI 24 IP User Manual (Rev. 6)
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use