How it Works
Chauvet DJ
Loading...
I
J
K
L
M
N
O
Loading...
Loading...
Jam Pack Emerald
User manual
15 pgs664.59 Kb0
Table of contents
Loading...

Chauvet DJ Jam Pack Emerald User manual

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
Claims ..................................................................................................................................................... 3
2. Introduction ................................................................................................................... 5
UV Strobe Combo................................................................................................................................... 5
Fog Machine ........................................................................................................................................... 5
UV Strobe Combo................................................................................................................................... 6
Fog Machine ........................................................................................................................................... 6
3. Setup .............................................................................................................................. 7
Fog Machine Fuse Replacement ............................................................................................................ 7
Orientation .............................................................................................................................................. 8
Rigging ................................................................................................................................................... 8
4. Operation ....................................................................................................................... 9
Strobe Mode ........................................................................................................................................... 9
UV On/Off ............................................................................................................................................... 9
IRC-6 Operation.................................................................................................................................... 10
5. Maintenance .................................................................................................................11
Storage ................................................................................................................................................. 11
6. General Fogger Troubleshooting ................................................................................12
7. Technical Specifications ..............................................................................................13
Returns .............................................................................................................................14
Contact Us ........................................................................................................................15
Page 2 of 15 JAM™ Pack Emerald User Manual Rev. 1
What Is

Unpacking
Instructions

Carefully unpack the product immediately and check the container to make sure all the
If the box or the contents (the product and included accessories) appear damaged from
Text
1—512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Critical installation, configuration, or operation information. Not damage to the product, or cause harm to the operator.

Disclaimer

The information and specifications contained in this document are subject to change
assumes no responsibility or liability for any errors or omissions
reserves the right to update the existing

1. BEFORE YOU BEGIN

Included

Claims

Conventions
• UV Strobe Combination Light
• Fog Machine
• CHAUVET® Fog Fluid (FJP)
• Permanently wired remote
• IRC-6 Remote Control
parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may inv alidate y our claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Convention Meaning
Symbol Meaning
• External Power Supply Adapter
• Power Cord
• Warranty Card
• Quick Reference Guide
following these instructions may make the product not work, cause
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
without notice. Chauvet that may appear in this manual. Chauvet document or to create a new document to correct any er rors o r omissions .
You can download the latest version of this docume nt f rom www.chauvetlighting.com.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
R. Isenstadt 07/01/15 A. Leon 07/02/15
Author Date Editor Updated
JAM™ Pack Emerald User Manual Rev. 1 Page 3 of 15
Product at a
x
P
x
P
P
x
DMX
x
User-Serviceable
x
x

Safety Notes

Do not touch the product’s housing when operating because it may be very hot.
completely disconnect the product from power via breaker or by unplugging it.
, be sure that
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your fog
, no longer than 90 days between
Glance
Use on Dimmer Outdoor Use Sound-Active
Master/Slave
Please read the following Safety Notes carefully before working with the product. The Notes include important safety information about instal lation, usage, and maintenance.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power cord by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
•
• The product is not intended for permanent installation.
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
• Do not use for space heating purposes.
• Use only CHAUVET® water-based fog fluid.
• Drain the tank before transporting the product.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
Auto Programs Auto-ranging Power Supply Replaceable Fuse
Keep this User Manual for future use. If you sell the product to someone else they also receive this document.
machine. Make sure you use FCQ regularly cleanings, to increase the life of your product.
Page 4 of 15 JAM™ Pack Emerald User Manual Rev. 1

2. INTRODUCTION

Product Overviews

Front Views
Back Panel Views
Indicator LED
DC Power In
Control Panel
Buttons
IR Sensor
Microphone
Sound
Sensitivity
Fog Nozzle
Fuse Holder
Power In
Wired Remote
Fluid Line
Fog Fluid
Tank Cover
Fog Fluid Level
Indicator
UV Strobe
Combo
Fog
Machine
JAM™ Pack Emerald User Manual Rev. 1 Page 5 of 15

Product Dimensions

8.5 in
215 mm
4.9 in
124 mm
21.2 in
537 mm
UV Strobe
Combo

Fog Machine

1.6 in
40 mm
2.2 in
55 mm
Page 6 of 15 JAM™ Pack Emerald User Manual Rev. 1
7.1 in
180 mm

Fog Machine
AC Power

The JAM™ Pack Emerald fog machine has a fixed voltage power supply and it can work
The listed current rating
• Always connect the product to a protected circuit (circuit breaker or fuse).
a rheostat (variable resistor) or dimmer circuit, even
Fog Machine
Fuse
External AC
ranging power supply
’s back panel, or refer
to a rheostat (variable resistor) or dimmer circuit, even if

3. SETUP

Replacement
with an input voltage of 120 VAC at 60 Hz or 230 VAC at 50 Hz. indicates the product’s average current draw under normal conditions.
Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate wear and improve its lifespan, during periods of non-use completely disconnect from power via breaker or by unplugging it.
Never connect the product to if the rheostat or dimmer channel serves only as a 0 to 100% switch.
1. Disconnect the fogger from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
The product does not ship with a spare fuse; however, the safety cap has room for a spare.
Always replace a blown fuse with a fuse of the same type and rating.
The JAM™ Pack Emerald UV Strobe Combo has an external auto-
Power Supply
that can work with an input voltage range of 100 to 240 V AC , 50/60 H z . To determine the product’s power requirements (circuit breaker, power outlet, and wiring),
use the current value listed on the label affixed to the power supply to the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit (circuit breaker or fu se).
• To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
Never connect the product the rheostat or dimmer channel serves o nly as a 0 t o 100% switch.
JAM™ Pack Emerald User Manual Rev. 1 Page 7 of 15

Mounting

, read and follow the safety recommendations indicated in the
may be mounted in any position; however,
CLP-02
Knobs
CLP-02
Safety Cable
(such as CH-05 from Chauvet)
Floor Mounting
Before mounting the product
Safety Notes.

Orientation

The Products in the JAM™ Pack Emerald make sure adequate ventilation is provided around t he produ ct .

Rigging

• Before deciding on a location for the product, alw ay s make su re ther e is easy access to the product for maintenance and progr amming pur pose s.
• Make sure that the structure onto which you are mounting the product can support the product’s weight. See the T echnical Specif ications for weight information.
• When mounting the product overhead, alway s use a safety cable. Mount the product securely to a rigging point, whether an elev at ed platform or a t r uss .
• When rigging the product onto a truss, use a mountin g cla mp of appropriate weight capacity.
• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.
Mounting Clamp
(such as the
Mounting Bracket
from Chauvet)
Page 8 of 15 JAM™ Pack Emerald User Manual Rev. 1
Mounting Diagram
Rubber Feet (x4) for
Bracket Adjus tm e nt
Mounting Brackets
(such as the
Mounting Clamps
from Chauvet)
Safety Cable
(such as CH-05 from Chauvet)
Fog Machine
Trigger the fogger using the included wired remote. The LED indicator on the remote
temperature. Press the
UV Strobe
Control Panel
Button
Function
UV Strobe
Combo

4. OPERATION

Wired Remote
Operation
Strobe Modes
indicates when the fogger has reached the required operating button on the remote to momentarily output fog. The length of the wired remote cable is 13 ft (4 m).
<STROBE
MODE>
<UV ON/OFF>
• Indicator LED will blink when Strobe mode is on.
• Indicator LED will be static on when in Sound-Active mode.
Off
Strobe Modes
Static On Sound-Active Mode
The products will only respond to low frequencies of music (bass and drums).
Cycles through strobe modes Turns the UV blackligh t on or off
Function LED Status
Very Slow (0.5–1 Hz) Slow (1–5 Hz) Medium (5–10 Hz) Fast (10–20 Hz) Very Fast (20–30 Hz)
Static On
Blinks to the speed of the strobe
Static On Static On

Strobe Mode

UV On/Off

Pressing <STROBE MODE> changes the UV Strobe Combo to the next mode. For example, if the UV Strobe Combo is set to Static On mode, and <STROBE MODE> is pressed once, the mode will be set to Sound-Active mode.
To cycle through modes on the UV Strobe Combo, press <STROBE MODE> repeatedly until the desired mode is set.
The UV LEDs on the UV Strobe Combo are controlled separately from the white strobe LEDs.
• If the UV LEDs are On, press <UV ON/OFF> to turn them Off.
• If the UV LEDs are Off, press <UV ON/OFF> to turn them On.
JAM™ Pack Emerald User Manual Rev. 1 Page 9 of 15

Infrared Remote
Control

The JAM™ Pack Emerald UV Strobe Combo is compatible with the IRC-6 infrared
IRC mode will activate at the press of any button on the

IRC-6 Operation

Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is pressed, try pressing <BLACK OUT>.
remote control from Chauvet. remote.
between the remote and the product. The following buttons functio n w it h the JAM™ Pack Emerald UV Strobe Combo:
• <BLACK OUT> - Turns LEDs on/off
• <SOUND> - Selects Sound-Active mode
• <STROBE> - Start/Stop strobing
• <UV> - Turns the UV on
• <W> - Turns white on
• <+> - Increases Strobe speed
• <-> - Decreases Strobe speed
• All other buttons on the remote have no function with this product
You may have inadvertently activated Black Out.
Page 10 of 15 JAM™ Pack Emerald User Manual Rev. 1
Product
cause overheating. This can lead
mechanical wear. To maintain optimum
s at least twice a month.
ns could be contributing factors
Fog Machine
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your
700. Make sure you use FCQ regularly, no longer than 90 days
between cleanings, to increase the life of your fogger.

Storage

Before storing the fogger, run FCQ through the system as described in the cleaning
. Do not refill the tank with fog
Cleaning the system prior to storage will help prevent any

5. MAINTENANCE

Dust build-up reduces light output performance and can
Maintenance
to reduction of the light source’s life and/or performance and minimize wear, clean your lighting product However, be aware that usage and environmental conditio to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to re move dust col lec ted on
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surfa ce.
7. Gently polish the transpar ent s urfac es until they are free of haze and lint.
Always dry the transparent surfaces carefully af ter cleaning them.
the external surface/vents.
cleaner, or isopropyl alcohol.
Maintenance
Do not allow the fogger to become clogged. After every 40 hours of continuous operation, use CHAUVET® Fog Cleaner Quart (FCQ) through the system to prevent the accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
Unplug the product from power. 1. Empty all fog fluid from the machine. 2. Add cleaning solution to the tank. 3. Connect the product to power and allow it to warm up. 4. Run the unit in a well-ventilated area until the tank is almost empty. Do not allow the 5.
pump to run dry.
Refill with fogger fluid to continue using the fogger. Run the machine briefly to clear 6.
any remaining cleaning solution from the pump and heater.
Do not operate the machine without fluid at any time.
Hurricane™
procedure above; however, only follow steps 1 through 5
fluid if storing the fogger.
particles from condensing inside the pump or heater w hile not in use.
Test-run your fog machine on a monthly basis to achieve the best performance.
JAM™ Pack Emerald User Manual Rev. 1 Page 11 of 15
Symptom
Possible Cause
Possible Action
Clean thoroughly with CHAUVET® FCQ. For full with CHAUVET® water-based fog fluid.
Make sure that the total load does not exceed 80% of the breaker or fuse nominal current
Short circuit along the power lines
Check power outlet Change to another outlet
Loose or damaged power cord
Check the power cord
Replace blown fuse with a good one of the same type and rating
Internal problem
Send product for repair
Low/No Fluid
Refill product with fluid
Pump protection system engaged
Release manual fog button, and press it again to reset pump protection system

6. GENERAL FOGGER TROUBLESHOOTING

No output or fog machine
Incorrect fluid
is spitting fluid
Blocked pipe or failing part Contact Customer Service
Circuit breaker or fuse
Excessive load on the circuit
keeps blowing
No energy on power outlet
Product does not power up
Blown fuse
Product stops pumping/ Loud noise
If you still experience problems after trying the solutions presented here, contact Chauvet Technical Support. See Contact Us.
instructions, see Fog Machine Maintenance. Refill
Check the power lines and power cords
Page 12 of 15 JAM™ Pack Emerald User Manual Rev. 1
Dimensions and Weight
Length
Width
Height
Weight
UV Strobe Combo
21.2 in (537 mm)
1.6 in (40 mm)
2.2 in (55 mm)
0.6 lb (0.3 kg)
Fog Machine
8.5 in (215 mm)
7.1 in (180 mm)
4.9 in (124 mm)
4 lb (1.8 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Value
UV Strob e Combo
External Power Supply
Fog Machine
Input Voltage
Fixed
Switching
Model-specific
Range
120 VAC, 60 Hz or
230 VAC, 50 Hz
Voltage Selection
Fixed
Auto-Ranging
Fixed
Parameter
UV Strob e Combo
Fog Machine
Consumption (120 V)
12 W
471 W
Operating Current (120 V)
0.18 A
3.9 A
Consumption (230 V)
12 W
471 W
Operating Current (230 V)
0.10 A
2.0 A
Fuse
N/A
F 5 A, 250 V
Fog Machine
Power I/O
U.S./Worldwide
Power input connector
IEC
Power output connector
Edison
Power Cord plug
Edison (U.S.)
UV Strob e Combo
Power I/O
U.S./Worldwide
Power input connector
Power DC Input
Power Supply Unit
12 VDC AC Adapter
Light Source
Type
Power
Lifespan
LED
0.6 W
50,000 hours
Color
Quantity
Current
White
4
0.19 A
UV 5 0.31 A
Photometrics
Parameter
UV Strob e Combo
Strobe Rate
0 to 16 Hz
Fog Machine
Operation/Capacity/
Consumption
Heat-up Time
Tank Capacity
Fluid Consumption
2.5 min
0.2 gal (0.6 l)
7.5 ml/min
Misc.
Output
1,500 cfm
Wired Remote
Length
13 ft (4 m)
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
Ordering
Product Name
Item Code
UPC Number
JAM™ Pack Emerald (120 V)
10051083
781462214319
JAM™ Pack Emerald (230 V)
10051084
781462214326

7. TECHNICAL SPECIFICATIONS

12 VDC, 1 A 100–240 VAC, 50/60 Hz
JAM™ Pack Emerald User Manual Rev. 1 Page 13 of 15
R
In case you need to get support or return a product:
, contact your
Call the corresponding Chauvet Technical Support office and request a Return
(RMA) number before shipping the product. Be prepared to
provide the model number, serial number, and a brief description of the cause for the Send the merchandise prepaid, in its original box, and with its original packing and
Clearly label the package with the RMA number. Chauvet will refuse any product returned
properly. Any shipping damage resulting from inadequate
reserves the right to use its own discretion to repair or replace returned
ETURNS
• If you are located in the U.S., contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact
your local distributor. See www.chauvetlighting.com for distributors outside the U.S., UK, Ireland, Mexico, or Benelux.
If you are located outside the U.S., UK, Ireland, Mexico, or Benelux distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website www.chauvetlighting.com for contact details.
Merchandise Authorization return. accessories. Chauvet will not issue call tags.
without an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on the box.
Before sending the product, clearly write the following information on a piece of paper and place it inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product packaging will be your responsibility. FedEx packing or double-boxing are recommended.
Chauvet product(s).
Page 14 of 15 JAM™ Pack Emerald User Manual Rev. 1
C
WORLD HEADQUARTERS - Chauvet
General Information
Toll free: (800) 762-1084
Technical Support
World Wide Web www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Fax: +44 (0)1773 511110
Technical Support
MEXICO - Chauvet Mexico
General Information
Voice: +52 (728) 285-5000
Technical Support
CHAUVET EUROPE - Chauvet Europe BVBA
General Information
Technical Support
, contact the dealer of record and follow
r to return a product. Visit the Chauvet website for contact
information.
ONTACT US
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560
Address: Unit 1C Brookhill Road In dustrial Es tate Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
Address: Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000
Address: Stokstraat 18 9770 Kru ishoutem Belgium Voice: +32 9 388 93 97
Outside the U.S., Unit ed Kingdom, Ireland, Mexico, or Benelux
JAM™ Pack Emerald User Manual Rev. 1 Page 15 of 15
their instructions to request support o
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015
Email: tech@chauvetlighting.com
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Email: Eutech@chauvetlighting.eu
World Wide Web www.chauvetlighting.eu
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use