How it Works
Chauvet DJ
Loading...
F
G
H
I
Loading...
Loading...
Geyser RGB
User manual
18 pgs944.78 Kb0
Table of contents
Loading...

Chauvet DJ Geyser RGB User manual

Download
User Manual
TABLE OF CONTENTS
1. Before You Begin .......................................................................................................... 3
Claims ....................................................................................................................................................... 3
2. Introduction ................................................................................................................... 5
3. Setup .............................................................................................................................. 7
Fuse Replacement .................................................................................................................................... 7
Orientation ................................................................................................................................................. 8
Rigging ...................................................................................................................................................... 8
4. Operation ......................................................................................................................11
Starting Address ...................................................................................................................................... 11
8-Channel ................................................................................................................................................ 12
Wireless Remote Control ......................................................................................................................... 13
Programmable Color Selection ................................................................................................................ 13
5. Technical Information ..................................................................................................14
6. Technical Specifications ..............................................................................................16
Returns .............................................................................................................................17
Contact Us ........................................................................................................................18
Page 2 of 18 Geyser™ RGB User Manual Rev. 8
What Is

Unpacking
Instructions

container to make sure all the
If the box or the contents (the product and included accessories) appear damaged from Failure to report damage to the carrier immediately may invalidate your claim. In
For other issues, such as missing components or parts, damage not related to shipping,
Text
1–512
A range of values
50/60
A set of values of which only one can be chosen
Settings
A menu option not to be modified
Menu > Settings
A sequence of menu options to be followed
<ENTER>
A key to be pressed on the product’s control panel
ON
A value to be entered or selected

Symbols

Critical installation, configuration, or operation information. Not damage to the product, or cause harm to the operator.

Disclaimer

are subject to change
ity for any errors or omissions,
and reserves the right to revise or recreate this manual at any time. Download the latest
Product at a
x
P
x
P
x
P
P
x
x

1. BEFORE YOU BEGIN

Included

Claims

Conventions
• Geyser™ RGB
• Geyser™ RGB Wireless Remote Control
• Geyser™ RGB Wired Remote Receiver
Carefully unpack the product immediately and check the parts are in the package and are in good condition.
shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. addition, keep the box and contents for inspection.
or concealed damage, file a claim with Chauvet within 7 days of deliver y .
Convention Meaning
Symbol Meaning
• Power Cord
• Warranty Card
• Quick Reference Guide
The information and specifications contained in this User Manual without notice. Chauvet assumes no responsibility or liabil
version from www.chauvetlighting.com.
© Copyright 2015 Chauvet. All rights reserved.
Electronically published by Chauvet in the United States of America.
Author Date Editor Date
A. Leon 6/1/15 D. Couppe 6/1/15
Use on Dimmer
Glance
Geyser™ RGB User Manual Rev. 8 Page 3 of 18
Outdoor Use Sound-Active DMX Master/Slave
following these instructions may make the product not work, cause
Important installation or configuration information. The product may not function correctly if this information is not used.
Useful information.
Auto Programs Fixed voltage (120 V or 230 V) Replaceable Fuse User-Serviceable

Safety Notes

nformation about the mounting, usage, and maintenance
Do not add perfume, alcohol, gasoline, or any other flammables to the fog fluid.
completely disconnect the product from power via breaker or by unplugging it.
to clean your
no longer than 90 days between
for use with CHAUVET® Quick
Dissipating Fluid (QDF). For optimum performance with your fogger, Chauvet
These notes include important i of this product; read before using the product.
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing
the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• If mounting the product overhead, always secure to a fastening device using a
safety cable.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Do not mount the product on a flammable surface (linoleum, carpet, wood, paper,
carton, plastic, etc.)
• The product’s nozzle is very hot during operation and it remains hot for a long time after operation has stopped.
• The fog exits the nozzle at a very high temperature. Keep a minimum distance of
6.5 ft (2 m) from the nozzle to the nearest object.
• Do not use the product as a space heater .
• Do not drink or become in contact with the fog fluid. If you do, call your local
emergency service (911 in the US) for help.
•
• Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or panel of the product.
• The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose the product to rain or moisture.
• Always install the product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Make sure there is adequate fog fluid in the machine to prevent pump and heater
damage.
• Never connect the product to a dimmer.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product by the power cord or any moving part. Always use the
handles.
• The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate the product at higher temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Contact the nearest authorized technical assistance center.
• This product is not intended for permanent installation.
• Use only CHAUVET® water-based fog fluid.
• Drain the tank before transporting the product.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
Keep this User Manual for future use. If you sel l the product to another user, be sure to give this document to the next owner.
Fog Cleaner Quart (FCQ) was specifically developed by Chauvet Geyser™ RGB. Make sure you use FCQ regularly, cleanings, to increase the life of your fogger.
The Geyser™ RGB was specifically designed recommends using QDF.
Page 4 of 18 Geyser™ RGB User Manual Rev. 8

2. INTRODUCTION

Overview

3-pin DMX
In/Out
Fluid Tank
Safety Eye
Remote Control
Receiver Port
5-pin DMX
In/Out
Alternate
Safety Eye Loop
Attachment Point
LED Display
Nozzle and LEDs
On/Off Switch
Loop
Fuse Holder
Power In
Handles
Safety Cable
Attachment Point
(Underside)
Geyser™ RGB User Manual Rev. 8 Page 5 of 18

Dimensions

Page 6 of 18 Geyser™ RGB User Manual Rev. 8

AC Power

work with an input
circuit breaker, power outlet, and
s panel, or refer to
Fuse
Installed fuse (held by plastic clip)
Spare fuse holder
(inside safety cap)
Safety cap

3. SETUP

The Geyser™ RGB has a fixed voltage power supply and it can voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the specific model.
To determine the product’s power requirements ( wiring), use the current value listed on the label affixed to the product’ the product’s specifications chart. The listed current rating indicates the product’s average current draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0–100% switch.
Replacement
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with another of the same type and rating.
Geyser™ RGB User Manual Rev. 8 Page 7 of 18

Mounting

, read and follow the safety recommendations indicated in
, remove the fluid tank
Fluid Tank
To avoid spillage with any mounting, always position the fluid tank with the tank’s
Before mounting the product the Safety Notes.

Orientation

Primarily, the Geyser™ RGB is to b e floor mounted in a vertical fog jet orientation. The Geyser™ RGB may also be mounted in a floor mounting/horizontal fog jet orientation or in an overhead mounting/downward fog jet orientation, but follow i nstructi ons closely t o avoid tank spills.
When mounting the Geyser™ RGB in any in verted position from the holder and set it upright on an adjacent surface.

Rigging

• Before deciding on a location, always make sure there is easy access to the product for maintenance and fluid replenishment.
• Make sure that the structure or surface onto which you are mounting the product can support the product’s weight (see the Technical Specifications).
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use mounting clamps of appropriate weight capacity. Three M12 holes are on the bottom of the product, which are appropriate for this purpose.
• The rubber feet also serve as floor supports. When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.
Floor Mounting
Position
Floor Mounting
Horizontal Fog Jet
Fluid Line
Vertical Fog Jet
Floor Mounting – Vertical Fog Jet
Horizontal Fog Jet
cap in the uppermost position above the tank’s fluid line.
Page 8 of 18 Geyser™ RGB User Manual Rev. 8
With inverted mounting, avoid spillage of the fog fluid by setting the fluid tank in
safety cable for both the Geyser™ RGB and
the fluid tank when rigging in this manner.
M12-sized bolts fit the threaded mounting holes on the bottom of the Geyser™ from Chauvet.
or
(or other elevated
The Fluid Tank in an
upright position
Overhead Mounting – Downward Fog Jet
Alternate Inverted
Truss Mounting
Safety Cable for
the Fluid Tank
Mounting Clamps for
the Geyser™ RGB
(works with CLP-15
CLP-15N clamp from
CHAUVET®
TRUSST®
platform or truss)
an upright position. Be sure to use a
Safety Cable
RGB. This sized mounting hole works with the CLP-15 and the CLP-15N clamps
Geyser™ RGB User Manual Rev. 8 Page 9 of 18

Tank Inversion for Invert e d Mount ing

Removable
Plate
1. Remove the screws and the bottle lock to take out the tank.
Bottle Lock
2. Turn the fog machine upside down and remove the screws to take off the removable plate.
3. Attach the removable plate to the opposite side and secure the tank with the bottle lock.
Page 10 of 18 Geyser™ RGB User Manual Rev. 8

Control Panel
Operation

underneath the
Button
Function
p
q(<DOWN>)

Menu Map

oFF
on
Configuration
When selecting a starting DMX address, always consider the number of DMX channels
choose a starting address that is too high, you could
mode, which defines the
HEAT shows on the display when you first turn the product on and intermittently
up time of the fog fluid; however, you can configure the product
during this time.

4. OPERATION

To access the control panel functions, use the four buttons located display.
<MENU>
(<UP>)
<ENTER>
Mode Programming Steps Description
DMX Mode Addr 1–512
Color Program CH-1–CH-4
Selects an operation mode or to backs out of the current menu option Scrolls up the list of options or selects a higher value Scrolls down the list of options or selects a lower value Activates a menu option or a selected value
Selects the DMX starting address Color program off (default)
Co 1–Co 9
rAnd
Selects preset colors Selects random color program
(DMX)

Starting Address

Fluid Sensor orL
The Geyser™ RGB Wireless Remote Control buttons 1–4 trigger the op tions s et in the color programs CH-1–CH-4, respectively.
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the product.
the selected DMX mode uses. If you restrict the access to some of the product’s channels.
The Geyser™ RGB uses up to 8 DMX channels in its 8-Channel highest configurable address to 505.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com. To select the starting address, do the following:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address.
during the heat-
oFF
Selects fluid sensor to on or off
Geyser™ RGB User Manual Rev. 8 Page 11 of 18

DMX Channel Modes, Assignments, and Values

000 ó 009
No function
010 ó 255
Fog on
000 ó 009
No function
010 ó 255
0–100%
000 ó 009
No function
010 ó 255
0–100%
000 ó 009
No function
010 ó 255
0–100%
000 ó 009
No function
010 ó 255
Color mixing
000 ó 009
No function
010 ó 255
Speed, slow to fast
000 ó 009
No function
010 ó 255
Strobe, slow to fast
000 ó 009
No function
010 ó 255
0–100%

8-Channel

Channel Function Value Setting
1 Fog
2 Red
3 Green
4 Blue
5 Color Mixing
6 Auto Speed
7 Strobe
8 Dimmer
Page 12 of 18 Geyser™ RGB User Manual Rev. 8
Configuration
s in standalone mode may transmit DMX
Wireless Remote
To trigger fog output and activate the color program using the wireless remote control, do
(Standalone)
Set the product to Automatic mode to control without a DMX controller.
1. Connect the product to a suitable power outlet.
2. Turn the product on.
Never connect a product that is operating in any standalone mode to a DM X s trin g connected to a DMX controller. Product signals that could interfere with the DMX signals from the controller.
Control
the following:
1. Plug the wireless receiver into the Remote Control Receiver port on the side of the Geyser™ RGB.
2. On the wireless transmitter, press the button assigned to the color program (1–4). The Geyser™ RGB emits fog and activates the color program for as long as you hold down the button.
Note: If the color program is set to oFF for any trigger button, only fog output is triggered when that button is pressed.
There is no need to set the DIP switches on the remote control’s receiver. These DIP switches are reserved for future use.
Programmable
Color Selection
To select either the preset color program or one preset color to illuminate the fog using the wireless remote control, follow the instructions below:
1. Press <MENU> repeatedly until CH-1–CH-4 shows on the display. Select CH-1,
CH-2, CH-3, or CH-4 to choose that color program. Note: The color program numbers correspond with the numbered buttons on
the wireless transmitter.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select rAnd (for random colors) or Co 1–Co 9 (to choose one of nine preset colors).
Note: Select oFF to turn off the color program for that button.
4. Press <ENTER>.
5. Repeat steps 1–4 to configure the other buttons.
Geyser™ RGB User Manual Rev. 8 Page 13 of 18
Fogger
After every 40 hours of continuous
through the system to prevent the
Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your
longer than 90 days
between cleanings, to increase the life of your fogger.

Storage

Before storing the fogger, run FCQ through the system as described in the cleaning
any particles from condensing inside the pump or heater while not in use.

5. TECHNICAL INFORMATION

Do not allow the fogger to become clogged.
Maintenance
operation, use CHAUVET® Fog Cleaner Quart (FCQ) accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
1. Unplug the product from power.
2. Empty all fog fluid from the machine.
3. Add cleaning solution to the tank.
4. Connect the product to power and allow it to warm up.
5. Run the unit in a well-venti late d area until the ta nk is almost empty . Do not allow the pump to run dry.
6. Refill with fogger fluid to continue using the fogger. Run the machine briefly to clear any remaining cleaning solution from the pump and heater.
Do Not operate the machine without fluid at any time.
Geyser™ RGB. Make sure you use FCQ regularly, no
procedure above; however, only follow steps 1 through 5. Do not refill the tank with fog fluid if storing the fogger. Cleaning the system prior to storage will help prevent
Test-run your Geyser™ RGB on a monthly basis to achieve the best per for man ce.
Page 14 of 18 Geyser™ RGB User Manual Rev. 8

General Troubleshooting

Clean thoroughly with CHAUVET® FCQ. For with CHAUVET® water-based fog fluid.
Contact Customer Service
Excessive load on the circuit
Make sure that the total load does not exceed 80% of the breaker or fuse nominal current
Short circuit along the power lines
Check the power lines and power cords
No energy on power outlet
Check power outlet Change to another outlet
Loose or damaged power cord
Check the power cord
Blown fuse
Replace blown fuse with a good one of the same type and rating
Internal problem
Send product for repair
No fluid
Turn the product off and replenish the fog fluid (use only CHAUVET® water-based fog fluid)
Heater or pump
Clean thoroughly with CHAUVET® FCQ. For with CHAUVET® water-based fog fluid.
Wired remote defective
Make sure that the remote is connected available
Inappropriate wired remote operation
See Wireless Remote Control for instructions
Wireless remote connected
Make sure that the wireless remote receiver is
Wireless remote battery
Replace battery on wireless remote transmitter Internal problem
Send the product for repair
Symptom Display Possible Cause Possible Action
No output or low output or fog machine is spitting fluid
Circuit breaker or fuse keeps blowing
Product does not power up
Product does not output fog
“Addr” or “HEAT”
Off
Off
“Addr” or “HEAT”
Wrong fluid
Blocked pipes or failing part
clogged
disconnected or
receiver not
full instructions, see F ogger Maintenance. Refill
full instructions, see F ogger Maintenance. Refill
Try the remote on another Geyser™ RGB if
connected
If you still experience problems after trying the above solutions, contact Chauvet Technical Support.
transmitter ran out of
Geyser™ RGB User Manual Rev. 8 Page 15 of 18
Dimensions and
Length
Width
Height
Weight
20 in (510 mm)
14.7 in (375 mm)
9.8 in (250 mm)
21 lb (9.6 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
120 VAC, 60 Hz
or 230 VAC, 50 Hz
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
1,500 W
1,500 W
Current
11.6 A
6.2 A
Fuse
F 15 A, 250 V
F 8 A, 250 V
Power I/O
US/Worldwide
UK/Europe
Power input connector
IEC
IEC
Power Cord plug
Edison (US)
Local plug
Light Source
Type
Power
Lifespan
LED
3 W
50,000 hours
Color
Quantity
Current
Red
7
800 mA
Green
7
800 mA
Blue
7
800 mA
Photo Optic
Parameter
Illuminance @ 2 m
4870 lx
Operation/Capacity/
Consumption
Heat-up Time
Tank Capacity
Fluid Consumption
4 min
0.7 gal (2.5 l)
8 min/1 l
Misc.
Output
17,000 cfm
Thermal
Maximum External Temp.
Cooling System
104 °F (40 °C)
Convection
DMX
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
8
Ordering
Product Name
Item Code
UPC Number
Geyser™ RGB
05070561
781462209094
Geyser™ RGB 220 V
05070567
781462209155

6. TECHNICAL SPECIFICATIONS

Weight
Model-specific
Fixed
Page 16 of 18 Geyser™ RGB User Manual Rev. 8
R
To return a product or request support:
In any other country, DO NOT contact Chauvet. Contact your distributor. See
If you live outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact your distributor of record and follow their instructions on how to return Chauvet products to them. Visit our website for contact details.
RMA
Call the corresponding Chauvet Technical Support office and request a Return Merchandise
an RMA number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly
Before sending the product, clearly write the following information on a piece of paper and place it
will be your responsibility. FedEx packing or double-boxing are recommended.
ETURNS
• In the U.S., contact Chauvet World Headquarters (see Contact Us).
• In the UK or Ireland, contact Chauvet Europe Ltd. (see Contact Us).
• In Mexico, contact Chauvet Mexico (see Contact Us).
• In Benelux, contact Chauvet Europe BVBA (see Contact Us).
•
www.chauvetlighting.com for distributors outside the U.S., United Kingdom, Ireland, Mexico, or
Benelux.
Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause for the return. You must send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet will not issue call tags. Clearly label the package with the RMA number. Chauvet will refuse any product returned without
on the box.
inside the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
Geyser™ RGB User Manual Rev. 8 Page 17 of 18
C
WORLD HEADQUARTERS - Chauvet
General Information
Toll free: (800) 762-1084
Technical Support
World Wide Web www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - Chauvet Europe Ltd.
General Information
Fax: +44 (0)1773 511110
Technical Support
MEXICO - Chauvet Mexic o
General Information
Voice: +52 (728) 285-5000
Technical Support
CHAUVET EUROPE - Chauvet Europe BVBA
General Information
Voice: +32 9 388 93 97
Technical Support
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your dealer. Follow their instructions to request support or to return a product. Visit our website for contact details.
ONTACT
US
Address: 5200 NW 108th Avenue Sunrise, FL 33351 Voice: (954) 577-4455 Fax: (954) 929-5560
Address: Unit 1C Brookhill Road Industrial E sta te Pinxton, Nottingham, UK NG16 6NT Voice: +44 (0)1773 511115
Address: Av. Santa Ana 30 Parque Industrial Lerma Lerma, Mexico C.P. 52000
Address: Stokstraat 18 9770 Kruishoutem Belgium
Voice: (954) 577-4455 (Press 4) Fax: (954) 756-8015 Email: tech@chauvetlighting.com
Email: uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
Email: servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Email: Eutech@chauvetlighting.eu World Wide Web www.chauvetlighting.eu
Page 18 of 18 Geyser™ RGB User Manual Rev. 8
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use