User Manual
Table of Contents
TABLE OF CONTENTS
1. Before You Begin ....................................................................... 1
What Is Included ........................................................................................... 1
Unpacking Instructions.................................................................................. 1
Claims ..................................................................................................................... 1
Text Conventions .......................................................................................... 1
Symbols ........................................................................................................ 1
Disclaimer ..................................................................................................... 1
Intellectual Property ...................................................................................... 1
Safety Notes.................................................................................................. 2
2. Introduction ................................................................................ 3
Product Overview.......................................................................................... 3
Product Dimensions ...................................................................................... 4
3. Setup ........................................................................................... 5
AC Power...................................................................................................... 5
Battery Power................................................................................................ 5
Charging the Battery ............................................................................................... 5
Battery Life Indicator ............................................................................................... 5
Mounting ....................................................................................................... 6
Orientation............................................................................................................... 6
Rigging .................................................................................................................... 6
4. Operation .................................................................................... 7
Control Panel Operation................................................................................ 7
Menu Map ..................................................................................................... 7
Using FlareCON Air 2.............................................................................................. 8
Wireless D-Fi Signals.............................................................................................. 8
DMX Signals from a Controller via Cable................................................................ 9
Wireless Control with DMX Products ...................................................................... 9
Setting Up Products with FlareCON Air 2 ............................................................... 10
Configuring FlareCON Air 2 .................................................................................... 11
Selecting A Channel ................................................................................................ 11
Selecting a Signal Input Mode ................................................................................. 11
Connecting to a Mobile Device................................................................................ 11
Finding the Name of FlareCON Air 2 Wi-Fi™.......................................................... 12
Connecting to FlareCON Air 2 Wi-Fi™ .................................................................... 12
Connecting to a DMX Controller.............................................................................. 12
Controlling DMX Lights with D-Fi Hub..................................................................... 12
5. Maintenance................................................................................ 13
Product Maintenance .................................................................................... 13
6. Technical Specifications ........................................................... 14
Returns............................................................................................ 15
Contact Us ...................................................................................... 16
FlareCON Air 2 User Manual Rev. 2
Before You Begin
1. Before You Begin
What Is Included
• FlareCON Air 2
• External Power Supply
• USB Cable
Unpacking Instructions
Carefully unpack the product immediately and check the container to make sure all the parts are in the
package and are in good condition.
Claims
If the box or the contents (the product and included accessories) appear damaged from shipping, or show
signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier
immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed
damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions
Convention Meaning
1–512 A range of values
50/60 A set of values of which only one can be chosen
Settings A menu option not to be modified
Menu > Settings A sequence of menu options to be followed
<ENTER> A button to be pressed on the product’s control panel
ON A value to be entered or selected
• DMX Adapter
• Quick Reference Guide
Symbols
Symbol Meaning
Electrical warning. Not following these instructions may cause electrical damage to
the product, accessories, or the user.
Critical installation, configuration, or operation information. Not following these
instructions may make the product not work, cause damage to the product, or cause
harm to the operator.
Important installation or configuration information. The product may not function
correctly if this information is not used.
Useful information.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet
assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or
disruption caused by any errors or omissions in this document, whether such errors or omissions result from
negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document
without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to
make, and does not commit to make, any such revisions. Download the latest version from www.chauvetdj.com
Intellectual Property
The works of authorship contained in this manual, including, but not limited to, all design, text and images
are owned by Chauvet.
© Copyright 2019 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
CHAUVET, the Chauvet logo, and FlareCON Air 2 are registered trademarks or trademarks of Chauvet & Sons
LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product
names and logos referred to herein may be trademarks of their respective companies.
.
FlareCON Air 2 User Manual Rev. 2
Page 1 of 16
Safety Notes
• Always connect the product to a grounded circuit to avoid the risk of electrocution.
• Always disconnect the product from the power source before cleaning or replacing the fuse.
• Avoid direct eye exposure to the light source while the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect the product from power by pulling or tugging on the cord.
• Make sure there are no flammable materials close to the product when operating.
• Do not touch the product’s housing when operating because it may be very hot.
• Do not charge the battery of the product in a closed case or container.
• The product is not intended for permanent installation.
• The voltage of the outlet to which you are connecting this product must be within the range stated
on the decal or rear panel of the product.
•
This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this
product to rain or moisture
• Be sure that no ventilation slots on the product’s housing are blocked.
• Never connect the product to a dimmer or rheostat.
• Make sure to replace the fuse with another of the same type and rating.
• Never carry the product from the power cord or any moving part.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher
temperatures.
• In the event of a serious operating problem, stop using the product immediately.
• Never attempt to repair the product. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Before You Begin
.
Keep this User Manual for future use. If the product is sold to someone else, be sure that
they also receive this document.
Page 2 of 16
FlareCON Air 2 User Manual Rev. 2
Introduction
Antenna
OLED Display
Menu Buttons
DMX Adapter In
Micro USB Port
Hook and Loop
Fastener Strap
2. Introduction
Product Overview
To power the product ON or OFF, press and hold the <MENU> + <ENTER> buttons
for 3 seconds.
FlareCON Air 2 User Manual Rev. 2
Page 3 of 16
Product Dimensions
A
6.2 in
158 mm
3.3 in
83 mm
Front View
Side View
0.9 in
24 mm
Introduction
Page 4 of 16
FlareCON Air 2 User Manual Rev. 2
Setup
100%
80% 60% 20%40%
3. Setup
AC Power
The FlareCON Air 2 has an auto-ranging power supply and it can work with an input voltage range of 100
to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current
value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.
• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the
product has an appropriate electrical ground to avoid the risk of electrocution or fire.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat
or dimmer channel serves only as a 0 to 100% switch.
Battery Power
The FlareCON Air 2 comes with a rechargeable lithium battery for cable free operation.
Charging the Battery
The battery charges whenever the FlareCON Air 2 is plugged into the external charger and the charger is
plugged into a power source. If the product is plugged in and not in operation, make sure the product is
turned off.
When connected to the power supply, charge the FlareCON Air 2 while the unit is powered OFF.
Battery Life Indicator
The indicators on the OLED Menu Display show how much battery life remains available. The drawing
below provides a key to reading the battery life indicators.
Battery Run Time
Maximum Run Time (all colors on) Recharge Time
Up to 8 hours 4 hours
FlareCON Air 2 User Manual Rev. 2
Page 5 of 16
Setup
Safety Hook and
Loop fastener
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
Orientation
The FlareCON Air 2 may be mounted in any position; however, make sure adequate ventilation is provided
around the product.
Rigging
• Before deciding on a location, always make sure there is easy access to the product for maintenance and
programming.
• Make sure adequate ventilation is provided around the product.
• Make sure that the structure or surface onto which you are mounting the product can support the product’s
weight. (see the Technical Specifications
• When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging
point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.
• When power linking multiple products, mount the products close enough for power linking cables to reach.
Mounting Diagram
)
Page 6 of 16
FlareCON Air 2 User Manual Rev. 2
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the Product Overview to see the button locations on the control panel.
Button Function
<MENU> Press to find an operation mode or to back out of the current menu option
<UP> Press to scroll up the list of options or to increase the numeric value in a function
<DOWN> Press to scroll down the list of options or to decrease the numeric value in a function
<ENTER> Press to activate a menu option or set the selected value in a function
Menu Map
Mode Programming Levels Description
Manual Channel <CH01–16>
Input Mode
Back Light
Information
Factory Reset
<WIFI>
<DMX>
On
10S
20S
30S
Version
WIFI SSID
<Wi-Fi™ name>
WIFI Channel
<01–16>
No
Yes
Manually selects a channel for the D-Fi network
Sets the input mode to wireless WiFi™ signal input
Sets the input mode to wired DMX signal input
Does not turn off
Turns off after 10 seconds
Turns off after 20 seconds
Turns off after 30 seconds
Shows the installed software version
Displays the name of the current Wi-Fi™ network
(SSID)
Displays the number of the current channel
Resets to factory settings
To power the product ON or OFF, press and hold the <MENU> + <ENTER> buttons for 3
seconds.
FlareCON Air 2 User Manual Rev. 2
Page 7 of 16
Operation
FlareCON™ app on
Tablet or Smartphone
FlareCON Air 2
D-Fi-compatible
Light
Mobile Device
sends Wi-Fi™
Signal to
FlareCON Air 2
FlareCON Air 2 sends
D-Fi Signal to D-Fi-
compatible products
D-Fi Hub sends
DMX Signal to
DMX-compatible
products via
cable
Using FlareCON Air 2
FlareCON Air 2 works with the following:
• Smartphones and tablets (mobile devices) running the FlareCON app
• D-Fi-compatible lights
•D-Fi Hub
• DMX controllers
• DMX lights when used with a D-Fi Hub or connected directly via a DMX cable
The FlareCON app is free and available from the Google Play Store or the Apple App Store.
Be sure to connect only one mobile device at a time.
Wireless D-Fi Signals
When FlareCON Air 2 is used with a mobile device it creates a wireless network (Wi-Fi™) for receiving the
signals from the mobile device, and then it sends D-Fi signals wirelessly to D-Fi-compatible lights or a D-Fi Hub
.
Page 8 of 16
Be sure to connect only one smartphone or tablet at a time.
• The tablet or smartphone running FlareCON app should be within 200 ft (60 m) of
FlareCON Air 2.
• Always install FlareCON Air 2 within 400 ft (120 m) of the products receiving D-Fi.
FlareCON Air 2 works best within the line of sight of the D-Fi products.
FlareCON Air 2 User Manual Rev. 2
Operation
DMX Controller
FlareCON Air 2
D-Fi-compatible
Light
DMX Controller sends
DMX Signal to FlareCON
Air 2 via cable
FlareCON Air 2
sends D-Fi Signal to
D-Fi-compatible
products
FlareCON Air 2
sends DMX
Signal to DMX-
compatible
product via cable
FlareCON Air 2
Mobile Device
sends Wi-Fi™
Signal to
FlareCON Air 2
FlareCON Air 2 sends
D-Fi Signal to D-Fi Hub
D-Fi Hub sends
DMX signal to
DMX-compatible
product via cable
DMX Signals from a Controller via Cable
When FlareCON Air 2 is used with a DMX controller, FlareCON Air 2 receives signals from the controller
through a DMX cable. FlareCON Air 2 then sends:
• D-Fi signals wirelessly to D-Fi-compatible lights
• DMX signals via a DMX cable connected to any DMX-compatible product
Always install FlareCON Air 2 within 400 ft (120 m) of the products receiving D-Fi.
FlareCON Air 2 works best within the line of sight of the D-Fi products.
Wireless Control with DMX Products
When using the FlareCON Air 2 to wirelessly send D-Fi signals while using DMX lights that have no D-Fi
capability, FlareCON Air 2 must be used with a D-Fi Hub. The FlareCON Air 2 creates a wireless network
(Wi-Fi™) for receiving the signals from the mobile device, and sends D-Fi signals wirelessly to the D-Fi Hub.
D-Fi Hub then converts those signals to DMX and sends those signals through a DMX cable to the DMX
lights.
Be sure to connect only one smartphone or tablet at a time.
FlareCON Air 2 User Manual Rev. 2
• The tablet or smartphone running FlareCON app should be within 200 ft (60 m) of
FlareCON Air 2.
• Always install FlareCON Air 2 within 400 ft (120 m) of the products receiving D-Fi.
FlareCON Air 2 works best within the line of sight of the D-Fi products.
Page 9 of 16
Operation
Setting Up Products with FlareCON Air 2
The FlareCON Air 2 allows several different configurations with D-Fi and DMX products. Refer to examples
shown in the Using FlareCON Air 2 sections for configuration requirements in your setup.
To configure your products with FlareCON Air 2, you will be performing the following steps:
1. Connect FlareCON Air 2 to power.
2. Turn on Wi-Fi™ on your mobile device.
If you have not already done so, download and install FlareCON app onto your mobile device.
3. Go to Wi-Fi™ settings on your mobile device and connect to FlareCON Air 2’s default Wi-Fi™ (SSID).
See Connecting to a Mobile Device for instructions.
4. To avoid interference with other wireless signals in the immediate area, manually select the Wi-Fi™
channel <
5. Set your products to receive signal input from FlareCON Air 2. For details, refer to the User Manuals for
the products in your setup.
• Set products to receive signals on the same channel as was set on FlareCON Air 2 in the
• Set products to their most basic DMX personality.
Make sure the DMX starting address is set to 001.
6.
Select whether FlareCON Air 2 receives signals wirelessly or via a DMX cable. See Selecting a
Signal Input Mode
For DMX products, be sure to use a DMX cable to connect from DMX Out of the product transmitting
the DMX signal (depending on your setup, FlareCON Air 2 or D-Fi Hub) to the DMX In of the product
receiving the DMX signal.
CH01
> to <
previous step.
CH16
.
> on the FlareCON Air 2. See Selecting A Channel.
7. Once your products are properly connected to FlareCON Air 2, and FlareCON Air 2 is properly
connected to FlareCON app, open the FlareCON app on your mobile device. For details, refer to the
Connecting to a Mobile Device section.
Using your mobile device, you can now select the colors emitted by your lights. Refer to the
Configuring FlareCON Air 2 section below for details on setting up products with FlareCON Air 2.
For detailed information on the operation of the FlareCON app, download the User
Manual from the Chauvet website at http://www.chauvetdj.com/.
Page 10 of 16
FlareCON Air 2 User Manual Rev. 2
Operation
Configuring FlareCON Air 2
Configuring FlareCON Air 2 involves selecting the operating channel and input mode - either Wi-Fi™ to
operate it from a mobile device, or DMX to connect it to a controller.
Selecting A Channel
The Wi-Fi™ channel can be selected manually. To select an operating channel, do the following:
1. Connect FlareCON Air 2 to power.
2. Press <
3. Use <
4. Press <
5. Use <
6. Press <
receiving channel.
Selecting a Signal Input Mode
Selecting the signal mode input determines how the FlareCON Air 2 receives control signals, either in WiFi™ mode from the FlareCON app or in DMX mode from a DMX controller or another light.
To set the signal input mode, do the following:
1. Connect the FlareCON Air 2 to power.
2. Press <
3. Use <
4. Press <
5. Use <
6. Press <
Connecting to a Mobile Device
Connect to a mobile device only after the FlareCON Air 2 has been configured, and the FlareCON app has
been installed on the mobile device.
To complete the connection to your mobile devices, you will need to do the following:
1. Find the name of FlareCON Air 2’s default Wi-Fi™. See Finding the Name of FlareCON Air 2 Wi-Fi™.
2. Using the Wi-Fi™ network name identified in the previous step, select this Wi-Fi™ network on your
mobile device. See Connecting to FlareCON Air 2 Wi-Fi™.
For more information about the Wi-Fi™ settings options on your smartphone or tablet, see
the documentation that came with your mobile device.
MENU
> to access the main menu.
UP
> or <
DOWN
ENTER
UP
> or <
DOWN
ENTER
MENU
> to access the main menu.
UP
> or <
DOWN
ENTER
UP
> or <
DOWN
ENTER
When using a smartphone or tablet running on Android operating systems, it might be
helpful to adjust the Wi-Fi™ settings on your mobile device to avoid losing the Wi-Fi™
connection to the FlareCON Air 2. Depending on the exact model of your mobile device,
the exact wording in your settings options may vary. Perform either or both of the
following:
1. Open Wi-Fi™ settings on your smartphone or tablet.
2. Deselect functionality that turns on Wi-Fi™ scanning.
3. Deselect functionality that automatically switches Wi-Fi™ networks.
4. Return to Wi-Fi™ settings on your smartphone or tablet.
5. Select the Application Manager.
6. Select ALL.
7. Scroll to and select Wi-Fi™ to clear data and clear cache.
8. Scroll to and select Wi-Fi™ Direct Share to clear data and clear cache.
> until
Manual Channel
>.
> to scroll through channel numbers <
> to select the channel number. Use this same channel to set the other products’
> until
Input Mode
>.
> to select the <
> to set the desired input mode.
WIFI
is selected in the display.
CH01
is selected in the display.
> or <
DMX
> mode.
> to <
CH16
>.
Chauvet recommends having lights configured and ready to respond before connecting a
mobile device.
FlareCON Air 2 User Manual Rev. 2
Page 11 of 16
Operation
Finding the Name of FlareCON Air 2 Wi-Fi™
To find the name of the FlareCON Air 2 Wi-Fi
1. Connect FlareCON Air 2 to power.
2. Make sure a channel is selected (see Selecting A Channel) and the input mode is set to
Selecting a Signal Input Mode).
3. Press <
4. Use <
5. Press <
6. Use <
Wi-Fi
7. Press <
MENU
> to access the main menu.
UP
> or <
DOWN
ENTER
UP
> or <
DOWN
™
name (SSID) from FlareCON Air 2 to select the Wi-Fi™ on your mobile devices.
MENU
> to exit the
> until
>.
> to display the current Wi-Fi™ name and channel number. Use this default
Information
Connecting to FlareCON Air 2 Wi-Fi™
To connect a mobile device to the FlareCON Air 2 Wi-Fi™, do the following:
1. Connect FlareCON Air 2 to power.
2. Make sure the input mode is set to
3. To connect your mobile device to the FlareCON Air 2 Wi-Fi
mobile device to select the Wi-Fi
4. Open the FlareCON app. The SSID displays in the center of the screen.
Once connected, the name of the FlareCON Air 2 default Wi-Fi™ can be changed in the
FlareCON app. See the FlareCON User Manual for more information. User Manuals are
available at http://www.chauvetdj.com/.
Connecting to a DMX Controller
To configure a system that uses a DMX controller connected to FlareCON Air 2 to control lights (see
DMX Signals from a Controller via Cable), do the following:
1. Set FlareCON Air 2 for DMX input. See Selecting a Signal Input Mode.
2. Connect a DMX cable from the DMX Out of the controller to the DMX In adapter of FlareCON Air 2.
3. Configure remaining products. See Setting Up Products with FlareCON Air 2.
For information about operating the DMX controller, see the user Manual for the controller. User Manuals for
CHAUVET controllers are available from the Chauvet website at http://www.chauvetdj.com/.
Controlling DMX Lights with D-Fi Hub
FlareCON Air 2 can wirelessly control DMX lights when it is used with a D-Fi Hub.
To configure a system that uses FlareCON Air 2 and a D-Fi Hub to wirelessly control DMX lights, do the
following:
1. Configure products as instructed in Setting Up Products with FlareCON Air 2 using a D-Fi Hub as
one of the wirelessly receiving products.
2. Connect a DMX cable from the DMX Out of the D-Fi Hub to the DMX In of the DMX product.
Information about using D-Fi Hub can be found in its manual on the Chauvet website at
http://www.chauvetdj.com/.
™, do the following:
Information
™
is selected in the display.
menu function.
WIFI
.
™
, use the Settings function of the
network named in FlareCON Air 2’s Information screen.
WIFI
(see
Page 12 of 16
FlareCON Air 2 User Manual Rev. 2
MAINTENANCE
5. Maintenance
Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean
your lighting products at least twice a month. However, be aware that usage and environmental conditions
could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl
alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
FlareCON Air 2 User Manual Rev. 2
Page 13 of 16
Technical Specifications
6. Technical Specifications
Dimensions and Weight
Length Width Height Weight
6.2 in (158 mm) 3.3 in (83 mm) 0.9 in (24 mm) 0.6 lb (0.3 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type Range Input Voltage
External 100 to 240 VAC, 50/60 Hz 5 VDC, 1.6 A
Parameter 120 V, 60 Hz 230 V, 50 Hz
Consumption 4 W 4 W
Operating Current 0.72 A 0.45 A
Wireless
Max Unobstructed Distance Frequency Range
Wi-Fi™: 200 ft (60 m)
D-Fi™: 400 ft (120 m)
Thermal
Maximum External Temperature Cooling System
104 °F (40 °C) Convection
DMX
Channel Range I/O Connectors
512 3-XLR
Ordering
Product Name Item Code UPC Number
FLARECONAIR2 03081588 781462219369
2.412 to 2.484 GHz
Page 14 of 16
FlareCON Air 2 User Manual Rev. 2
Returns
Returns
In case you need to get support or return a product:
• If you are located in the US, contact Chauvet World Headquarters.
• If you are located in the UK or Ireland, contact Chauvet Europe Ltd.
• If you are located in Benelux, contact Chauvet Europe BVBA.
• If you are located in France, contact Chauvet France.
• If you are located in Germany, contact Chauvet Germany.
• If you are located in Mexico, contact Chauvet Mexico.
• If you are located in any other country, DO NOT contact Chauvet. Instead, contact your local
distributor. See www.chauvetdj.com
Germany, or Mexico.
If you are located outside the US, UK, Ireland, Benelux, France, Germany, or Mexico,
contact your distributor of record and follow their instructions on how to return Chauvet
products to them. Visit our website www.chauvetdj.com
Call the corresponding Chauvet Technical Support office and request a Return Merchandise Authorization
(RMA) number before shipping the product. Be prepared to provide the model number, serial number, and
a brief description of the cause for the return.
To submit a service request online, go to www.chauvetdj.com/service-request
Send the merchandise prepaid, in its original box, and with its original packing and accessories. Chauvet
will not issue call tags.
Clearly label the package with the RMA number. Chauvet will refuse any product returned without an RMA
number.
Write the RMA number on a properly affixed label. DO NOT write the RMA number directly on
the box.
for distributors outside the U.S., UK, Ireland, Benelux, France,
for contact details.
.
Before sending the product, clearly write the following information on a piece of paper and place it inside
the box:
• Your name
• Your address
• Your phone number
• RMA number
• A brief description of the problem
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be
your responsibility. FedEx packing or double-boxing are recommended.
Chauvet reserves the right to use its own discretion to repair or replace returned product(s).
FlareCON Air 2 User Manual Rev. 2
Page 15 of 16
Contact Us
Chauvet World Headquarters
Chauvet Europe Ltd
Chauvet Europe BVBA
Chauvet France
Chauvet Germany
Chauvet Mexico
Address: Av. de las Partidas 34 - 3B
Lerma, Edo. de México, CP 52000
General Information Technical Support
Address: 5200 NW 108th Ave. Voice: (844) 393-7575
Sunrise, FL 33351 Fax: (954) 756-8015
Voice: (954) 577-4455 Email: chauvetcs@chauvetlighting.com
Fax: (954) 929-5560
Toll Free: (800) 762-1084 Website: www.chauvetdj.com
Address: Unit 1C Email: UKtech@chauvetlighting.eu
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK Website: www.chauvetdj.eu
NG16 6NT
Voice: + 44 (0) 17 7 3 511115
Fax : + 44 (0) 1 7 7 3 511110
Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
9770 Kruishoutem
Belgium Website: www.chauvetdj.eu
Voice: +32 9 388 93 97
Address: 3, Rue Ampère
91380 Chilly-Mazarin
France Website: www.chauvetdj.eu
Voice: +33 1 78 85 33 59
Address: Bruno-Bürgel-Str. 11
28759 Bremen
Germany Website: www.chauvetdj.eu
Voice: +49 421 62 60 20
(Entrance by Calle 2)
Zona Industrial Lerma Website: www.chauvetdj.mx
Voice: +52 (728) 690-2010
Email: FRtech@chauvetlighting.fr
Email: DEtech@chauvetlighting.de
Email: servicio@chauvet.com.mx
Contact Us
Outside the US, U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Follow
the instructions to request support or to return a product. Visit our website for contact details.
Page 16 of 16
FlareCON Air 2 User Manual Rev. 2
Loading...