Page 1
Project
Item No.
Quantity
EEUCCW8 SERIES UPRIGHT CONVEYORS
STANDARD FEATURES
• Multi speed – 3 modes of operation to
maximize savings
• All-purpose 29"-wide peg belt
• Dish capacities up to 19,615 dishes
per hour (NSF Listed)
• Automatic tank fill
• Chemical dispensing equipment
connection provisions
• Choice of tank heat: electric, steam
coils or direct steam injectors
• Common hot water connection
• Common drain connection
• Common electric connection
(separate connection required for
optional electric booster and blower-dryer)
• One piece stainless steel wash/rinse
manifold system, easy to remove
• Door safety switch
• Electric eye energy sentinel (idle pump shut-off)
• Easy-to-reach top-mounted controls
• Heavy-gauge stainless construction
• Low-water tank heat protection
• Push-button start-stop station – load end
• Recirculating flushing nozzles – load end with prewash
• Rinse saver device
• Conveyor shut-off shelf – unload end
• Stainless steel enclosure panels – front & ends
• Vent fan control conection provided
OPTIONAL WORLD CLASS FEATURES
• Heat Recovery - redirects lost steam to heat
using less energy
EEUCCW8
Upright 29" Conveyor
Dishwashing Machine
Water
Consumption
as low as
84 GPH
SPECIFIER STATEMENT
Specified unit will be Champion model
EEUCCW8 upright 29" conveyor water
saver dishwashing machine.
Features automatic tank fill, chemical dispensing
connection provisions, common water, drain
and electrical connections, door safety switch,
low water tank heat protection, rinse saver.
1 year parts and labor warranty.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905-562-4195 Fax: 905/562-4618
(3M) 4/10 Printed in U.S.A
CH089
Champion Industries, Inc.
3765 Champion Boulevard, Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Page 2
EEUCCW8
Upright 29" Conveyor
Dishwashing Machine
MODULAR SECTIONS: Right to Left Operation
Dimensions shown in inches and [millimeters]
EEUCCW8
16" [406]
CL
33-5/8"
[854]
36" [914]
2
1/2 HP
4' [1219]
9-3/8" [238]
“B”
Unload
4B
4B
2' 2'-6"
4"
Quad
Rinse
0.2
3
HP
HP
13'-4" [4064] CL-CL
Overall Length “C”
8' [2438]
Wash/Rinse
Power
Rinse
4'4'
[1219][1219][610]
1
Wash
3
HP
31-1/2"
[800]
Minimum For Screen Removal
[762]
5-1/2" [140]
Prewash
5'-8" [1727]
“A”
Load
[102][102]
1
HP
1
2'-1"
4A
[635]
3
1'-10"
[559]
CL
4"
4A
7" [179]7" [179]
3
24" [610]
Clear
19" [483]
Clear
38" [965]
6" [152]
32"
[813]
6-1/4" [159]
12" [305]
Plumbing
Clearance
100" [2540]
Door
Removal
95" [2413]
Doors
Up
62" [1575]
Machine
Height
Plumbing
Clearance
10-1/2"
2
[267]
1-5/8"
[41]
Start/Stop
TABLE A - Machine Connection
Machine Only - Electric Heat
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 183 250 250
240/60/3 158 200 200
480/60/3 80 100 100
Machine-steam
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 29 40 40
240/60/3 26 35 35
480/60/3 14 20 20
Notes:
• Load Section (A) Standard 5',
contains 30" Prewash
• Prewash also available in a
48" HD section
• Non-standard load section
available in 12" increments
• Minimum load length 5'
(includes 30" prewash)
• Unload Section (B) Standard
TABLE B - Booster Connection
40°F/22°C Rise – 16 kW Electric built-in booster
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 44 60 60
240/60/3 38 45 45
480/60/3 19 25 25
70°F/39°C Rise – 30 kW Electric built-in booster
Minimum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 83 100 100
240/60/3 72 90 90
480/60/3 36 45 45
Contact Factory for additional voltages.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
5 ft contains 24" Aux.
• Rinse and 36" belt, available
in 12" increments
• Built in electric booster requires
a 5' minimum unload
• Built in steam booster requires
a mininum 6' unload
• Blow dryer section adds 4' to
overall length of machine
Page 3
Shipping weight crated: 150 lbs./ft. [68kg./m.]
Height with doors up: 95"
Height to remove doors: 100"
SPECIFICATIONS
Eco
Extended
Capacities
Dishes per hr. (NSF rated) 12,655 12,655 19,615
Conveyor speed (ft./min.) 8.0 8.0 12.4
Clean
Clean
Water consumption
Gal. per hr. (max. use) 84 134 134
Motor horsepower
Drive 1/2 Hp
Prewash 30" [762] 1 Hp
Prewash 48" [1219] 3 Hp
Wash 3 Hp
Power Rinse 3 Hp
Auxiliary Rinse 1/5 Hp
Temperatures °F
Wash (min.) 150
Power Rinse (min.) 160
Auxiliary Rinse (min.) 165
Final rinse (min.) 180
Heating
Tank heat Electric
Wash tank 25 kW
Rinse tank 20 kW
Auxiliary rinse 10 kW
Electric booster 16
(kW required for 40°F rise)
Electric booster 30
(kW required for 70°F rise)
Steam booster 80
(lbs./hr. required for 40°F rise)
Steam booster 135
(lbs./hr. required for 70°F rise)
Venting
Minimum cfm, load end 300
Minimum cfm, unload end 800
Express
Clean
EEUCCW8
Upright 29" Conveyor
Dishwashing Machine
Utilities EEUCCW8
1
Electrical Connection
A Machine connection (see table A)
B Booster connection (see table A)
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Note Plus size hot water heater for express clean usage.
Booster connections may vary. Contact the Factory.
Standard Voltages (Specify choice): 208/60/3, 240/60/3, and
480/60/3. Available in 3-phase only. For non-standard 3-phase voltages,
contact the Factory.
Plumbing Notes Because of the variation in house-supplied water
pressure, a water pressure regulating valve (PRV) is needed (water
PRV is standard). Steam PRV’s may be required for pressure higher
than 30 psi. The PRVs can either be purchased from Champion or
obtained locally.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Warning Plumbing and electrical connections should be made by
qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply line
at service connection.
Venting Notes
Fabricated duct size: 3-7/8" x 23-7/8" (outside dimensions)
Page 4
EEUCCW8
Upright 29" Conveyor
Dishwashing Machine
OPTIONS & ACCESSORIES
Tank heat; choices of electric, steam coil or
steam injectors
Booster Heaters – stainless steel
(completely inter-plumbed, controls are
inter-wired)
Electric: (40°F rise or 70°F rise)
EEUCCW8 UPRIGHT CONVEYOR
Steam: (40°F rise or 70°F rise)
48" Blower Dryer, electric or steam (add 4'
to overall length)
Belts: standard peg belt, flat belt, thermal
tray belt, silverware belt, belts with upper
cross rods, and other select combination belts
Start/Stop station, unload end
Back panels, stainless steel
Cold water thermostat (for pre-wash)
External scrap bucket on 48" pre-wash
(standard on 30" pre-wash)
External scrap bucket on wash tank
Insulated hoods, lower panels
Motor pumps, 2 or 3 Hp optional in lieu
of 1 Hp on pre-wash
Bumper rail, machine mounted
Steam pressure regulating valve
Drain water tempering kit
Drain interlocks
Unmounted fused disconnect switch for
machine and/or booster
Heat Recovery Unit redirects lost steam to
heat using less energy
Heat Recovery –
Redirects lost steam to heat using less energy.
Heated 110°F water
travels back to booster
Water leaves
booster at
180°F+
and travels to
nal rinse arms
Booster
60°F incoming water
to machine...no hot
water heater needed!
Multi-Speed –
3 modes of operations to maximize savings
• Eco Clean – lowest water usage in the industry
• Extended Clean – for heavily soiled items
• Express Clean – highest production in the industry
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Loading...