Project
Item No.
Quantity
DHBT/DH1T DOORTYPE
STANDARD FEATURES
• ENERGY STAR® Qualified
• Dual NSF listed as both a dishwasher
and Pot/Pan washer
• Automatic tank fill
• Built-in stainless steel electric booster
or internally mounted (D-HBT only)
• Automatic drain valve
• Adjustable mode/time selector switch
• Door activated cycle start
• Electric tank heat (5.2 kW)
• Low-water tank heat protection
• 2-Hp drip-proof pump motor
• Stainless steel pump impeller
• Door safety switch
• Interchangeable upper and lower spray arms
• Stainless steel front and side panels
• Vented wash chamber design
• Detergent/chemical connection provisions
• Water pressure regulating valve (mounted)
• Single point electrical connection (see chart)
• Vent fan control
DHBT/DH1T
Door-type
High Temperature
Extended Hood Warewashing Machine
D-HBT With Booster
D-H1T Without Booster
OPTIONS & ACCESSORIES
Sheet pan rack
Electric: 70°F rise (internally mounted) (D-HBT only)
Steam coil tank heat
40°F Steam booster (D-HBT only)
70°F Steam booster (D-HBT only)
Steam injector tank heat 40°F rise
(built-in) (D-HBT only)
Corner operation with 90° mounted controls
2674 N. Service Road
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
(1M) 9/10 Printed in U.S.A.
CH106
SPECIFIER STATEMENT
Specified unit will be Champion Industries model
DHB-T/D-H1T door-type high temperature extended
hood warewasher with built-in booster (D-HBT) or
without booster (D-H1T).
Features include 2 Hp motor, 5.2 kW electric tank heat,
dual NSF approved as both dishwasher and potwasher,
adjustable mode/timer switch and interchangeable
Stainless Steel upper and lower wash and rinse arms.
1 year parts and labor warranty.
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
DHBT/DH1T DOORTYPE
Cabinet
Control
5" [127]
9-1/4" [235]
3-1/4" [83]
6
" [152]
Front
2-7/8" [73]
Tracks
Inside
[511]
20-1/8"
6" [152] Min.
2
3
1
8" [203]
12-1/2" [318]
A A
Cabinet
Control
5" [127]
9-1/4" [235]
3-1/4" [83]
6
" [152]
Front
2-7/8" [73]
Tracks
Inside
[511]
20-1/8"
6" [152] Min.
Door-type High Temperature
Extended Hood Warewashing Machine
D-HBT with Booster
D-H1T Without Booster
Utilities
1
Electrical (See Box)
2
Hot Water
3/4" NPT 110°F -140°F hot water connection.
Flow pressure 20-22 psi.
3
Drain
2" OD connection. Max. flow rate. 15 US gpm.
For Electrical Heat
D-HBT w/40°F Rise Booster
Minimum
Supply Ckt.
Elec.
Specs.
208/60/1 76 80 80
240/60/1 85 90 90
208/60/3 42 45 45
240/60/3 47 50 50
480/60/3 20 25 25
575/60/3 17 25 25
For Electrical Heat
D-HBT w/70°F Rise Booster
Elec.
Specs.
208/60/3 59 70 70
240/60/3 67 70 70
480/60/3 31 35 35
575/60/3 26 30 30
For Steam Heat
D-HBT and D-H1T
Elec.
Specs.
208/60/1 15 20 20
240/60/1 14 20 20
208/60/3 8 15 15
240/60/3 7 15 15
480/60/3 4 15 15
575/60/3 3 15 15
Rated
Amps
Rated
Amps
Rated
Amps
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
A A
8" [203]
2
3
Side View
Details, Dimensions & Connections
92-1/2" [2302]
Door
Removal
27" [686]
Clearance
86" [2184]
Doors
Up
67-1/2" [715]
Mach.
Height
34" [864]
Load
Height
12-1/2" [318]
1
Front View
2HP
Dimensions shown in inches [millimeters]
Length between table connections: 26"
Volume crated: 46 cu. ft.
Shipping weight crated: 400 lbs.
For Electrical Heat
D-H1T Electrical Power Requirements
Minimum
Supply Ckt.
Rated
Amps
Conductor
Ampacity
Elec.
Specs.
208/60/1 40 50 50
240/60/1 43 50 50
208/60/3 22 25 25
240/60/3 23 25 25
480/60/3 10 15 15
575/60/3 8 15 15
1
Minimum
Overcurrent
Protective
Device
1" [25]
30"
[762]
2
3
13"
[ 330]
1-1/2" [32] Roll
7-1/4"
[184]
21-3/8"
1-1/8"
[29]
[543]
Typical Table Construction
Cabinet
Control
5" [127]
9-1/4" [235]
3-1/4" [83]
6
" [152]
Front
2-7/8" [73]
Tracks
Inside
[511]
20-1/8"
6" [152] Min.
DHBT/DH1T DOORTYPE
6" [152] min
2-7/8" [73]
Inside Tracks
[511]
20-1/8"
Front
Cabinet
Control
5" [127]
9-1/4" [235]
3-1/4" [83]
6
" [152]
Front
2-7/8" [73]
Tracks
Inside
[511]
20-1/8"
6" [152] Min.
2
3
1
8" [203]
12-1/2" [318]
A A
Door-type High Temperature
Extended Hood Warewashing Machine
D-HBT with Booster
D-H1T Without Booster
Dimensions shown in inches [millimeters]
2-7/8" [73]
6
" [152]
Corner Configuration
26" [660]
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336-661-1556 • Fax: 336/661-1979 • www.championindustries.com
SPECIFICATIONS
Capacities
Wash tank US gal. 9
Dishwasher Mode:
NSF Rated Racks per hr. 49/29
Pot/Pan Washer Mode:
NSF Rated Racks per hr. 19/10
Motor horsepower
Water consumption
Gal. per rack
US gal./liters 0.9/3.4 1.34/5.1
Gal. per hr.
(max. use) US gal. 44 36/99
Temperature°F
Wash 150
Rinse 180
Heating
Tank heat, electric (kW) 5.2
Tank heat, steam (lbs. per hr
required at 15 psi flow pressure) 25
Electric booster
(kW required for 40°F rise) 9
Electric booster
(kW required for 70°F rise) 13
Steam booster (internally mounted)
(lbs. per hr. required
for 40°F rise) 50
Steam booster (internally mounted)
(lbs. per hr. required for 70°F rise) 65
Time cycle in seconds
Dishwasher Mode Pot/Pan Washer Mode
Wash 44 96 Wash 156 336
Rinse 10 10 Rinse 13 13
Dwell 14 14 Dwell 11 11
Total 68 120 Total 180 360
6" [152] Min.
20-1/8"
[511]
Inside
Tracks
Control
Cabinet
Front
9-1/4" [235]
3-1/4" [83]
5" [127]
3"
[76]
20-1/8"
[511]
Inside Tracks
6" [152] min
Straight-through Configuration
2-7/8" [73]
Front
1
2" [51]
Warning: Plumbing and electrical connection
should be made by qualified personnel who will
Front
13-3/4"
13"
[343]
[330]
3
9"
[229]
19-7/8"
[505]
26"
[660]
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: 905/562-4618
2
3
2
Plan View
observe all the applicable plumbing, sanitary and
safety codes and the National Electrical Code.
Plumbing Notes: Because of the variation in
house supplied water pressure, a water pressure
regulating valve (PRV) is needed. The PRV is
supplied by Champion and has been installed
on the machine prior to shipment.
Note: Water Hammer Arrestor (meeting
ASSE-1010 standard or equivalent) to be
supplied (by others) in common water supply
line at service connection.
2
Dishwasher Pot/Pan Washer
Mode Mode
DHBT/DH1T
Door-type High Temperature
Extended Hood Warewashing Machine
D-HBT with Booster
D-H1T Without Booster
DHBT/DH1T DOORTYPE
Corner Unit Showing
90° Mounted Control Panel
Corner Configuration
2-7/8"
[73]
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: 905/562-4618
5-1/4" [133] Min.
20-1/8"
[511]
Inside
Tracks
Front
Control
Cabinet
9-1/4" [235]
5" [127]
3-1/4" [83]
Dimensions shown in inches [millimeters]
Loading...