Champion D-H1 User Manual

Project
Item No.
Quantity

DHB/DH1 DOORTYPE

STANDARD FEATURES

• ENERGY STAR® Qualified

• Automatic tank fill

• Detergent/chemical connection provisions

• Door safety switches

• Automatic electric drain valve

• Electric tank heat

• Interchangeable upper and lower spray arms

• Low-water tank heat protection

• Pump motor, drip-proof 1 Hp

• Stainless steel pump impeller

• Stainless steel front and side panels

• Top-mounted, splash-proof control console

• Single point electrical connection (see chart)

• Balanced door lift system

• Built-in 40°F/22°C rise stainless steel electric
booster (DHB only)

• Vent fan control

DHB/DH1

Door-type High Temperature

Dishwashing Machine

OPTIONS & ACCESSORIES

Sheet pan rack

Electric:

Steam coil tank heat

Steam injector tank heat (DHB only)

Steam: 40°F/22°C - 70°F/39°C rise

(built-in) (DHB only)

Corner operation

2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: [phone] Fax: [phone]

(1M) 9/10 Printed in U.S.A.

CH105

70°F/39°C rise (built-in) (DHB only)

SPECIFIER STATEMENT

Specified unit will be Champion model D-HB/D-H1 high
temperature dishwashing machine with built-in,
stainless steel booster heater (DH1 without booster).

Features top mounted control cabinet, balanced door-lift
with door safety switch, 40°F/22°C rise, built-in SST booster
(DHB only), interchangeable stainless steel wash and rinse
arms, 55 racks/hr., 0.86 US gals/rack, single point electrical
connection. Constructed of Type 304 SST.

1 year parts and labor warranty.

Champion Industries, Inc.

3765 Champion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

www.championindustries.com

FRON

T

5-1/4" [133] min

5-1/4" [133] min

20-1/2" [521]

Inside Tracks

DHB/DH1

Door-type High Temperature
Dishwashing Machine

Dimensions shown in inches and [millimeters]

Details, Dimensions & Connections

A A

60-1/2" [1537]

8-7/8" [225]

8-3/4" [222]

Length between table connections: 26"/660mm

92-1/2" [2302]

Door

Removal

86" [2184]

Doors

Up

67-1/2" [715]

Mach.

Height

Volume crated: 46 cu.ft.

Shipping weight crated: 350 lbs./158kg

27" [686]

Clearance

34" [864]

Load

Height

2HP

1

26" [660]

4" [102]

1

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 800/532-8591 • Fax: [phone] • www.championindustries.com

3

Side View

19-1/4"

[489]

19"

[483]

26"

[660]

Plan View

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]

9-1/4"

[229]

3

1

Front

13"

[330]

3

2

13-3/4"

[343]

2

2

20-1/8"

[511]

Inside Tracks

5-1/4" [133] min

Straight Through

Wash Pump 2 Hp

2-7/8" [73]

Front

Front View

Corner Configuration

DHB/DH1

Door-type High Temperature
Dishwashing Machine

Utilities

1

Electrical (See Box)

2

Hot Water (DHB)

3/4" NPT hot water 140°F/60°C min for
40°F/22°C rise booster. 3/4" NPT hot water
110°F/43°C min for 70°F/39°C rise booster. Flow
pressure 20-22 psi. (138-151kPa)

Hot Water (DH1)

3/4" NPT 180ºF/82ºC hot water connection.
Flow presure 20-22 ps, (138-151 kPA

3

Drain

2" O.D. connection. Max. flow rate
15 US gpm. (12imp.gpm/54/Lpm

For Electrical Heat

Elec.

Specs.

208/60/1 73 80 80

240/60/1 81 90 90

208/60/3 41 50 50

240/60/3 46 50 50

480/60/3 20 25 25

575/60/3 16 20 20

For Electrical Heat

Elec.

Specs.

208/60/3 58 60 60

240/60/3 66 70 70

480/60/3 30 35 35

575/60/3 25 30 30

Typical Table Construction

1-1/8"

[29]

Rated
Amps

Rated
Amps

30"

[762]

D-HB

w/40°F/22°C Rise Booster

Minimum

Supply Ckt.

Conductor

Ampacity

D-HB

w/70°F/39°C Rise Booster

Minimum

Supply Ckt.

Conductor

Ampacity

1-1/2" [32] Roll

21-3/8"

[543]

Minimum

Overcurrent

Protective

Device

Minimum

Overcurrent

Protective

Device

7-1/4"

[184]

SPECIFICATIONS

Capacity

Racks per hr. (NSF rated) 55
Wash tank US gal. (imp. gal/liters) 9 (7.5/34)

Motor horsepower 1
Water consumption

Gal. per hr. (max. use) US gal. (imp. gal/liters) 49 (41/186)
Gal. per rack (US gal. (imp. gal/liters) .86 (0.74/3.4)

Temperatures °F/°C

Wash 150/66
Rinse 180/82

Heating

Tank heat, electric, (kW) 5.2
Tank heat, steam (lbs.per hr.
required at 15 psi flow pressure) 25

DHB

only

Electric booster (kW required for 40°F/22°C rise) 9
Electric booster (kW required for 70°F/39°C rise) 13
Steam booster (internally mounted)

(lbs. per hr. required for 40°F/22°C rise) 50

Steam booster (internally mounted)

(lbs.per hr. required for 70°F/39°C rise) 65

Time cycle in seconds

Wash 40
Rinse 8
Dwell 12
Total cycle 60

For Electric Heat
D-H1 Electrical Power Requirements

Minimum

Supply Ckt.

Elec.

Specs.

115/60/1* 48 60 60

208/60/1 37 40 40

240/60/1 40 45 45

208/60/3 20 25 25

240/60/3 22 25 25

480/60/3 9 15 15

575/60/3 7 15 15

*3kW wash tank heat

Rated
Amps

Conductor

Ampacity

Minimum

Overcurrent

Protective

Device

Warning: Plumbing and electrical connection

should be made by qualified personnel who
will observe all the applicable plumbing,
sanitary and safety codes and the National
Electrical Code.

Plumbing Note: Because of the variation
in house-supplied water and steam
pressure, pressure regulating valves (PRV’s)
for incoming water and steam supply are
needed. The PRV’s can be purchased from
Champion or obtained locally.

Note: Water Hammer Arrestor (meeting ASSE­1010 standard or equivalent) to be supplied
(by others) in common water supply line at
service connection.

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 800/532-8591 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]

DHB/DH1

Door-type High Temperature
Dishwashing Machine

1

DHB/DH1 DOORTYPE

13" [330]

4-5/8" [118]

4

5

5"

[127]
5-1/4"

[133]

4"

[102]

Steam Heat

Utilities

1

Electrical (See Box)

2

Hot Water (DHB)

3/4" NPT 110°F/43°C - 140°F/60°C hot water connection.

17" [432]

Clearance

84" [2134]

Door

Removal

75"

60-1/2"

[1905]

[1537]

Door Up

57" [1448]

Load

Height

Mach.

Height

1

1

34" [864]

1 HP

8-3/4"
[222]

13-1/4"

3A

[337]
14-1/2"

2

[368]

3B

5

4

19-1/2"

[495]

8-7/8"
[225]

9-1/4"
[235]

3A3B2

Front View

Flow pressure 20-22 psi. (138-151kPa)

3

Drain
A.

2" O.D. machine connection (15 US gpm)

B. 3/4" NPT booster relief to open drain

4

Steam

3/4" NPT machine connection.
Flow pressure 15-30 psi.

5

Condensate

3/4" NPT machine return to boiler

A. Steam Injector
B. Steam Coil

4"

[102]

Steam Heat

For Steam Heat

D-HB w/40°F/33°C or 70°F/39°C Rise Booster

Minimum

Overcurrent

Protective

Device

Elec.

Specs.

Rated
Amps

Minimum

Supply Ckt.

Conductor

Ampacity

208/60/1 13 15 15

240/60/1 12 15 15

17" [432]

Clearance

84" [2134]

Door

Removal

75"

[1905]

Door Up

208/60/3 6 15 15

240/60/3 6 15 15

480/60/3 3 15 15

575/60/3 3 15 15

For Steam Heat
D-H1 Electrical Power Requirements

Minimum

Overcurrent

Protective

Device

Elec.

Specs.

Rated
Amps

Minimum

Supply Ckt.

Conductor

Ampacity

115/60/1 22 30 30

208/60/1 12 15 15

240/60/1 11 15 15

208/60/3 6 15 15

240/60/3 6 15 15

480/60/3 3 15 15

13" [330]

4-5/8" [117]

4

1 HP

8-7/8"

8-3/4"

[225]

[222]

13-1/4"

5-1/4"
[133]

7-1/4"

[184]

3A

[343]

14-1/2"

2

[368]

3B

19-1/2"

[495]

4

5

Front View

5

34" [864]

Load

Height

9-1/4"
[235]

3B3A2

57" [1448]

Mach.
Height

575/60/3 3 15 15

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 800/532-8591 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]

60-1/2"

[1537]

1