SYSTEM CONTROLLER
Rev 2.0
TB-CN2R1 (2 AXIS STANDARD)
TB-CN3R1 (3 AXIS STANDARD)
TB-CN3R1W (3 AXIS WEB)
TB-CN2R1 (2 AXIS STANDARD)
TB-CN3R1 (3 AXIS STANDARD)
TB-CN3R1W (3 AXIS WEB)
Instruction Manual
CONTENTS
WHAT'S IN THE BOX 2
WARNING & CAUTION 3
GENERAL DESCRIPTIONS 5
A. GENERAL DESCRIPTIONS 5
B. FEATURES 5
INSTALLATION 6
PART NAMES & FUNCTIONS 8
A. GENERAL DESCRIPTIONS 8
B. PART NAME & FUNTIONS (REAR SIDE) 9
C. DRAWING OF CONSOLE DESK 9
ACCESSING TO THE CAMERA MENU 10
A. DISPLAY LCD WINDOW 10
B. How to select address 10
C. Easy preset save and calls 11
D. How to use TOUR function 11
E. How to use PATTERN function 11
F. How to use AUTOSCAN function 12
G. How to use ABB key 12
H. How to use FUNTION key 12
HOW TO USE SETUP MENU 13
SPECIFICATION 14
DIMENSION 15
What's in the Box ?
1. Controller
2. Junction Box
3. RJ11 8 Pin Modular Cable 1EA
4. Manual
2
WARNING & CAUTION
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE
VENTILATIONGRILLS OR OTHER OPENINGS ON THE EQUIPMENT.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated"dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
3
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY
CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO
TAKE ADEQUATE MEASURES.
CE COMPLIANCE STATEMENT
INFORMATION TO THE USER : THIS EQUIPMENT HAS BEEN TESTED AND FOUND
TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT
GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF
NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECTTHEINTERFERENCE AT HIS OWN EXPENSE.
CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO
OPERATE THE EQUIPMENT.
FCC COMPLIANCE STATEMENT
4
GENERAL DESCRIPTIONS
A. GENERAL DESCRIPTIONS
B. FEATURES
TB-CN2R1, TB-CN3R1(3 AXIS STANDARD) AND TB-CN3R1W(3 AXIS WEB ) are pan/tilt
controller and it allows operator to use the functions easily.
This controls camera functions such as pan, tilt, zoom, focus and DVR control.
parameters.
the junction box.
Built in LCD Display with blue screen.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
This saves and calls camera preset positions.
Activates pre-programed pattern, auto-scan and group tour function keys.
The LCD shows display current status as well as provides a menu to set operational
This controller is designed for desktop operation and interface connectors are located
in
Recalls up to 255 cameras from one key board.
Multi-protocol supported in each cannel (PELCO-D, P)
Preset position control
Various manual control speed (1~64 steps)
Maximum speed is changed according to zoom ratio.
Recalls programmed guard tours from each dome camera
Recalls programmed auto-scan from selected dome camera
Programmable user preference. (tour, preset, pattern, auto-scan, etc.)
User password and system hold function
Supports DVR Protocol (Need to be modified)
Supports web communication for TX/RX ( TB-CN3R1W only)
Slave Communication to RS232
5
Loading...