ITD-736TH Ambient Sensor
• Wireless operation over available over Wi-Fi network, CCX or 900 MHz
• -40 C to 100 C (+/- 0.5 C)
• 2% RH; Accuracy (10-90%)
• Reliable and accurate temperature and humidity sensing
• Replaceable temperature and humidity calibrated modules for cost
|
|
efficient yearly replacement |
|
• |
Configurable reporting rates |
|
• Local audible alerting when temperatures or conditions are sensed |
|
|
|
outside of parameters |
|
• Patented Guaranteed Data Delivery (GDD) for up to 30 days if network is |
|
|
|
down |
|
• Long battery life with low-battery alert feature |
|
|
• |
Configurable reporting rates |
ITD-736TH Ambient Sensor |
• |
BLE connectivity for local setup and monitoring |
The ITD 736TH is a temperature and humidity sensor that has the ability to sense environmental changes reliably and accurately with customizable reporting rates.
The ITD-736TH Ambient Sensor is part of CenTrak’s family of environmental sensors. The devices enable a cost effective mechanism to ensure correct temperature and humidity levels in rooms or refrigerators. The ITD-736TH can generate alerts when temperatures or humidity levels are sensed above or below set parameters, and the system can provide logs which eliminate human error and the cost of manual documentation. The sensors will continue to monitor temperature and humidity in the event of a power outage, and have the ability to store measurements off line which can be transmitted when the network is restored. These sensors can operate over CCX, regular Wi-Fi or 902-928 MHz ISM band.
Maintenance and management is easy. CenTrak’s family of environmental sensors offer extreme battery life, are fully configurable in the field and allow for wireless upgrades.
CenTrak, Inc.
826 Newtown-Yardley Road Newtown, PA 18940
t: 215-860-2928 e: sales@centrak.com www.centrak.com
© CenTrak20172014. All. AllRightsRightsReservedReserved. Proprietary. Proprietaryand Confidentialand Confidential. . Draft version subject to revision.
ITD-736TH Ambient Sensor
CenTrak, Inc.
826 Newtown-Yardley Road Newtown, PA 18940
t: 215-860-2928 e: sales@centrak.com www.centrak.com
ITD-736TH Ambient Sensor
Technical Specifications
Operation
Wi-Fi or 900 MHz |
2.4 GHz (operates using CCX or Wi-Fi on |
|
|
802.11 b/g) or 902-928 MHz ISM band |
|
|
|
|
BLE (Bluetooth) |
2.4 GHz (operates according to BLE protocol) |
|
|
|
|
Display |
Multi-line display |
|
|
|
|
LED indicator |
YES |
|
|
|
|
NIST traceable calibration |
YES |
|
|
|
|
Battery Replacement |
YES, single screw |
|
|
|
|
Temperature Range (accuracy) |
0 oC to 70 oC |
+/- 0.5 oC, 2% RH |
SensorHumidityDimensionsRanges (accuracy) |
2% RH (10 - 90%) |
|
|
4% RH (0% - 100%) |
|
Case Length |
2.7 in (68 mm) |
|
|
|
|
Case Height |
4.5 in (114 mm) |
|
|
|
|
Case Width |
0.8 to 0.9 in (21 to 24 mm) |
|
|
|
|
Case Weight (with battery) |
4 oz. (114 g) |
|
|
|
|
Construction |
PC/ABS Mixture |
|
|
|
|
Durability |
Tough, impact resistant and temperature stable |
|
|
|
|
Environmental/Cleaning |
|
|
|
|
|
Storage Temperature (Tag) |
-20 oC to +75 oC (for best battery life store at |
|
|
room temperature or below) |
|
|
|
|
Sealing |
Splash resistant |
|
|
|
|
Sensor cleaning method |
Wipe Cleaning Method Only. See CenTrak |
|
|
Disinfection Guide for Instructions |
|
|
|
|
Power |
|
|
|
|
|
Battery Type |
Single Lithium AA (replaceable) |
|
|
|
|
*Available features may vary based upon the mode of operation
This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532.
L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
© CenTrak20172014. All. AllRightsRightsReservedReserved. Proprietary. Proprietaryand Confidentialand Confidential. . Draft version subject to revision.
IC Statement per the requirements in RSS-Gen Section 8.4 and RSP-100 Section 4.
English:
This component complies with Industry Canada ’s license-exempt RSSs. Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference that may cause undesired operation of the device.
French:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Warning: For mobile or fixed location transmitters, the minimum separation distance between
the antenna & radiating structures of the device and nearby persons is 20 cm, even if calculations
indicate that the MPE distance would be less.
Loading...