IT 712 in use
CenTrak, Inc.
125 Pheasant Run
Newtown, PA 18940
t: 215 860 2928 e: sales@centrak.com www.centrak.com
IT 712 Mini Asset Tag
The CenTrak Mini Asset Tag is a radio transmitter contained in a small, waterproof casing. The tag incorporates a tamper detection mechanism enabled as soon as the tag is applied to an asset. From this time forward, the tag is constantly monitored by the system. The Mini Tag features CenTrak’s Second Generation Infrared technology (Gen2IR™) and Low Frequency technology to support Clinical Grade Locating™ applications.
•Small size, lightweight
•Integrates with CenTrak’s RTLS and Guardian Security Solutions
•Gen2IR™ Technology for Clinical Grade Locating™ applications
•LF enabled to support choke point and egress detection
•Internal tamper sensor to send alerts when tag is removed
•Fully waterproof for easier cleaning
•Battery access while attached to asset
The tag is fully waterproof to allow for easy cleaning of all assets with the operation of other hospital or personal medical equipment. It is also resistant to soiling and UV light, and may be cleaned with a disinfectant solution. With a remarkably small profile, the tag is ideal for all medical equipment – particularly smaller assets like scopes and today’s more compact equipment.
The tag communicates with CenTrak’s Guardian Security System as well as CenTrak’s Clinical Grade RTLS™, so facilities are able to continually monitor assets locations to optimize workflow and utilization, as well as prevent shrinkage.
Specifications
FCC/IC Operating Frequency Range |
902 928 MHz (Model #IT 712E) |
|
|
CE |
|
|
|
Average transmission power |
2 uW (average) |
|
|
Gen2IR Sensor |
YES |
|
|
Low Frequency Sensor (125 KHz) |
RX |
|
|
Case length |
1.5 in (39.5 mm) |
|
|
Case width |
1.2 in (31 mm) |
|
|
Case height (thickness) |
0.3 in (8.5 mm) |
|
|
Case weight (with battery) |
0.42 oz (12 g) |
Operating Temperature |
0 C to +50 C |
|
|
Sealing |
waterproof |
|
|
This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532.
L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
© CenTrak 2014. All Rights Reserved. Proprietary and Confidential.
Loading...