Centrak 2X73Y User Manual

CENTRAK PROBE-BASED TEMPERATURE

SENSOR TAGRIT-735P

Covers ranges from -200C to +50C

●

0.75C accuracy (0.5C typical)

●

Customizable reporting rates – down to 12 seconds

Low power consumption for long battery life (4 years with 1 minute reporting rate)

●

NIST traceable calibration available

●

Button for event reporting

●

Integrates with CenTrak RTLS

Hospitals have a critical need for wireless monitoring of environmental fluctuations. They require reliable real time monitoring and alerting capabilities as well as comprehensive records of sensor data for reporting and analysis purposes. CenTrak’s advanced temperature sensing technology was developed to meet those needs.

The IT-735 is a probe-based temperature sensing tag that has the ability to monitor a wide range of temperatures, from cryogenic (-200C) to room temperature (+50C), reliably and accurately with customizable reporting rates down to 12 seconds at 0.75C accuracy. It is available for use with three specific temperature range probes : -20C to +50C (ITA-781),

-100 to -20C (ITA-782), and -200 to -100C (ITA-783)

The IT¬735 Tag creates a cost effective way to improve patient care as well as provide automated and detailed reports for any time period. In conjunction with the CenTrak RTLS this single Tag can be used to track, locate, identify and ensure correct temperature levels and can generate alerts via email/SMS when the temperature goes above or below set parameters. The system can also provide temperature logs which eliminate human error and the cost of manual temperature documentation.

CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com

Tags send temperature readings in intervals specified by the user (e.g., every one minute). The battery powered tags will even continue to monitor temperature and send a local alert in the event of a power outage. Tags provide an automated and accurate solution that improves regulatory compliance and saves time so that staff can focus on patient care and safety.

About CenTrak Technology

CenTrak’s core RTLS differs from legacy technologies in its use of a patented combination of second-generation infrared (Gen2IR™) and active RFID technology called DualTrak. Battery powered Monitors transmit a unique room number using Gen2IR which is received by any tag in that room. The tag communicates the room number and its own unique ID via RF to the CenTrak Location Server using a hospital’s existing wired or Wi-Fi network, where it can be accessed in real-time by hospital personnel and integrated with third party solution providers.

Like light, Gen2IR will not pass through walls and does not suffer from traditional infrared line-of-sight limitations. Therefore, when a tag reads a room number, there are no errors. This is certainty-based RTLS. Unlike estimation-based information, certainty-based location data can be used by hospitals to make important improvements to process flow and automate decision making. Most healthcare workflow improvements can only be realized when the location data is certainty-based.

WARNING: This guide is in draft form and can be changed without notice at any time by CenTrak. Please

contact CenTrak prior to commercial use to receive all the necessary latest information about the system.

902-928 MHz (Model # IT-735)

8M codes

> 300 feet

2 uW (Average) 1 button, LED, low battery

FCC Operating Frequency Range

868-870 MHz (Model # ITEU-735)

CE Operating Frequency Range

Operation

Group ID codes Outdoor transmission range

Field strength Smart Tag features

YES

Motion Sensor

ITA-786

ITA-787

ITA-751

ITA-752Double sided adhesive

Thermal vial holder Probe holder for air

temperature measuring

3M VHB adhesive (0.64 mm)

ITA-753

Screw attachment w/ adhesive pad

Operating temperature (Tag) Storage temperature (Tag)

+10C to +40C

-25 C to +80 C

Battery type Smart tag feature Low battery indication

Lithium CR2450

Environmental

Power

Probe temperature ranges

Thermal Vial

-20C to +50C (ITA-781)

-100 to -20C (ITA-782)

-200 to -100C (ITA-783)

ITA-785

Attachment Options

Case length Case height Case width

1.5 in (38.48mm)

1.98 in (50.36 mm)

0.94 in (24 mm)

Case weight (with battery) Construction

1.10 oz. (34.02g)

Durability Tough, impact resistant and

temperature stable

ABS & Poly Carbonate mixture

Tag Dimensions

Note: Must use CenTrak Disinfection procedure. Other methods may void product warranty.

Tag cleaning method

Wipe Cleaning Method Only.

See CenTrak Tag Disinfection Guide for Instructions

Cleaning

CENTRAK PROBE-BASED TEMPERATURE SENSOR TAG IT-735 TECHNICAL SPECIFICATIONS

CenTrak, Inc. 5 Caufield Place, Suite 102 Newtown, PA 18940 t: 215-860-2928 e: sales@centrak.com www.centrak.com

This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425 , 7,061,428 , 7,378,964

+ 4 hidden pages