Page 1
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Page 1 of 6
Warning:
Caution: Any changes or modifications not
expressly approved by the party responsible
for product compliance could void the user's
authority to operate the equipment.
CenTrak
Hand Wa shing Monitor
Hardware Installation
Guide
This guide is in draft form and can be changed without notice at
anytime by CenTrak. Please contact CenTrak prior to commercial
use to receive all the necessary and latest information about the
system.
Copyright © 2010 CenTrak, Inc. All rights reserved.
Document Name:
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 2
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Page 2 of 6
Small Round Dispenser
Flat Front Dispenser
How to Insta ll the CenTr ak Hand W ashing Monitor Hardware
Items Needed ............................................................... 3
Small Round Soap Dispenser Installation ................ 4
Large Round Soap Dispenser Installation ............... 5
Flat Front Sanitizer Dispenser Installation ............... 6
Large Round Dispenser
Document Name:
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 3
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Page 3 of 6
Flat side
Round back
For use on flat front
CENTRAK HWM HARDWARE INSTALLATION GUIDE
How to Install the CenTrak Hand Washing
Monitor Hardware
Items needed for Installation
CenTrak Hand Washing Monitor
mounts to
HWM
type dispensers
mounts to
dispenser
Rounded back, double stick adhesive mount
(for use on round dispensers)
Flat double stick adhesive mount
(for use on flat front dispensers)
Document Name:
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 4
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Page 4 of 6
Flat side
Round back
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Small Round Soap Dispenser
A-1. Peel off flat side of adhesive backing and firmly
place flat side down onto Hand Washing Monitor as
shown in Figure A-1.
mounts to
HWM
Press on firmly for 15 seconds.
Fig. A-1
A-2. Peel off curved side of adhesive covering and
place Hand Washing Monitor (HWM) onto dispenser,
making sure to mount more than 3 inches above push
mechanism (where soap comes out).
Press firmly and hold for 15 seconds.
mounts to
dispenser
Fig. A-2
Document Name:
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 5
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Page 5 of 6
Flat side
Round back
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Large Round Soap Dispenser
B-1. Peel off flat side of adhesive backing and
firmly place flat side down onto Hand Washing
Monitor as shown in Figure B-1.
Press on firmly
for 15 seconds.
mounts to
HWM
Fig. B-1
B-2. Peel off curved side of adhesive covering and
place Hand Washing Monitor onto dispenser,
making sure to mount above push mechanism (3”
above where soap comes out).
Press firmly and hold for 15 seconds.
Fig. B-2
mounts to
dispenser
Document Name:
Confidential & Proprietary. DO NOT Copy or Distribute.
Page 6
HWM Installation Guide
Document Version Number:
201010CT203022MAN
Effective Date:
10/01/10
Page 6 of 6
CENTRAK HWM HARDWARE INSTALLATION GUIDE
Flat Front Sanitizer Dispenser
C-1. Using the flat double stick mounting adhesive,
Peel off adhesive backing and firmly place onto
back of Hand Washing Monitor. Then remove
backing from other side.
Fig. C-1
C-2. Place HWM onto dispenser, 4-5 inches above
where soap comes out.
Press firmly and hold for 15 seconds.
Fig. C-2
Document Name:
Confidential & Proprietary. DO NOT Copy or Distribute.
Loading...