All rights reserved. No part of this booklet may be reproduced,
in any form or means whatsoever, without permission in writing
from C. Crane Company, Inc.
Page 2
CA
95540
Super USB WiFi Antenna
Introduction
Thank you for purchasing the Super WiFi USB Antenna II
To help ensure many years of service please read this
manual carefully.
Specifications
Compatability
• Windows 98™through Windows Vista
™
• Mac OS®10.3 through 10.5
• Linux operating systems.
• USB 1.1 — 2.0 interface.
• 802.11b and 802.11g up to 54Mbps.
• WEP, WPA, and WPA2 encryption.
Features
• Line of sight (no obstructions) operation of more than
one-half mile.
• WiFi Strength: 24.5 db
• High-quality 15' USB cable.
Introduction to Software Installation
We recommend you turn off your computersʼ internal
WiFi antenna before you start (See page 13).
Since not all operating systems are the same (e.g. Windows, Mac, Linux), we have supplied installation directions for each type. Please read and follow each step of
the installation and connection instructions for your operating system.
Linux users: See instructions on the Software CD.
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries. Windows Vista is a registered trademark of Microsoft Corporation in the United States and other countries.
Mac OS is a registered trademark of Apple Inc.
Super USB WiFi Antenna
Page 3
Windows 98 – XP Installation
Installation
1. Insert the supplied CD into your computerʼs disk
drive. The setup software should start automatically
after a few seconds.
2. When the “Welcome” screen appears, click “Next”.
3. When the “Choose Destination” screen appears,
click “Next”.
4. Click “Finish” to exit.
5. Connect the USB cable between the Super WiFiUSB Antenna and your computerʼs USB port. The
cable will plug in just one way and should not be
forced in.
Page 4
Super USB WiFi Antenna
Windows 98 – XP Installation
Note: When connecting the USB cable to the Super USB
WiFi Antenna, be sure that it is tightly connected and
there is no gap between.
Connecting to a WiFi Site
1. Double left click on the “ZD” icon that shows in the
clock taskbar.
2. A window titled “Wireless LAN Configuration Tool
Plus” will be displayed. Click the “Refresh” button on
the utility to scan for WiFi sites within range.
Note: When a site is highlighted, details about the selected site will be displayed in the “Current Network Information” box. If the “Encrypt” detail shows as “None” then
a security key is not required before connecting to the
site.
3. Double-click your desired WiFi network from the
“Available Network” list.
4. If the selected network requires a security key before
connecting, a message will ask if you would like to
use your previously entered security key. Click “No”
if this is your first time connecting to the selected
WiFi network with the Super USB WiFi Antenna.
Super USB WiFi Antenna
Page 5
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.