Casio SE-S10 M User Manual
Casio SE-S10 M
Setup and Programming Steps
Cash Register Support
011-314 8888
SE-S10 M SETUP
1. Turn PGM key to PGM mode
2. Plug in Cash Register into wall socket
3. Open the printer lit and insert batteries under the paper roll
a. Batteries are not supplied with Cash Register
4. Drop the Thermal Roll inside the paper slot
SETUP TIME AND DATE
1. Enter “0” and press Cash – English
2. When the display shows blinking “ 0 “
3. Enter 2 Digits (Day) & press Cash
4. Enter 2 Digits (Month) & press Cash
5. Enter 2 Digits (Year) – Cash Register will Reset Automatically
NB: By pressing AC/C key, this procedure returns one by one
1. When the display shows a blinking “ 0 “
2. Enter 2 Digits (Hours) & press Cash
3. Enter 2 Digits (Minutes) & press Cash
Now a Receipt will be printed with the Date & Time Programmed
BASIC OPERATION - SE-S10M
1. Turn mode switch to REG
2. Type in the amount of the item and press the department button 1-5
3. If you are done with the sale press subtotal and then total will be on screed.
4. Type in the amount that the customer gives you and press cash.
5. This will finalize your transaction and present Customer Change
SETUP OF PLU’S
PLU Price
1. Turn the mode switch to PGM
2. Type in the first PLU number and press the PLU button
3. Type in the price and press cash
4. You can keep on doing this until all your 500 PLU’S are entered
5. To save all the prices press subtotal
6. Turn the mode switch back to REG
PLU Descriptions
1. Turn the mode switch to PGM
2. Enter 2 & press Subtotal
3. Enter PLU Number & press the PLU KEY
4. Enter Character “SMS” style & Press 00 & Press Cash
5. Press Subtotal – To Save
STEPS ON USING PLU’S
1. Turn mode switch to REG
2. Enter the PLU number of the item you want to sell and press the PLU button
3. This will ring up the price on the screen
6. If you are done with the sale press subtotal and then total will be on screed.
7. Type in the amount that the customer gives you and press cash.
4. This will finalize your transaction and present Customer Change
Department Programming
Descriptions
1. Turn mode switch to PGM
2. Enter 2 & press Subtotal
3. Press Dept Key
4. Enter Descriptions – Press “ 00 “ for next letter
5. When done press Cash
6. Press Subtotal to save
Loading...