Casio IT-G500-C16E, IT-G500-GC16E, IT-G500-C26E, IT-G500-15E, IT-G500-GC26E User Manual
...
Handheld Terminal
User’s Guide
E
Series
Be sure to read “Safety
Precautions” inside this
guide before trying to use
your Handheld Terminal.
Contents
Safety Precautions .........................................................................................E-3
Operating Precautions ...................................................................................E-7
Regulatory Information ..................................................................................E-8
About the Waterproofing/Dustproofing ........................................................E-9
Important ......................................................................................................E-10
After Service ...................................................................................................... E-10
Accessories and Options .............................................................................E-10
General Guide ...............................................................................................E-11
Loading and Removing the Battery Pack ...................................................E-14
Loading ..............................................................................................................E-14
Removing ........................................................................................................... E-15
Charging the Battery Pack ..........................................................................E-16
USB Cradle/Ethernet Cradle/Cradle-type Battery Charger ............................... E-16
Dual Battery Charger ......................................................................................... E-16
Handling the Hand Belt ................................................................................E-17
To remove the hand belt .....................................................................................E-17
To attach the hand belt ....................................................................................... E-17
Handling the Stylus ......................................................................................E-18
Placing the stylus in the holder .......................................................................... E-18
Connecting the Stylus String .......................................................................E-19
Attaching the Neck Strap.............................................................................E-21
To attach the neck strap ...................................................................................... E-21
Configuring Handheld Terminal Settings ...................................................E-22
Calibrating Touch Screen Alignment ................................................................. E-22
Adjusting Display Brightness ............................................................................E-23
Display Auto Dimmer ........................................................................................ E-23
Using the Laser Scanner (Laser Models) ...................................................E-24
Using the C-MOS Imager (Imager Models) ................................................E-25
Adjusting the Laser Light Emission Width .................................................E-26
Handling the NFC .........................................................................................E-28
E-1
E-2
Performing Communications ......................................................................E-29
Bluetooth® Communication ...............................................................................E-29
GSM/W-CDMA Communication ......................................................................E-30
GPS ....................................................................................................................E-30
Handling microSD Cards .............................................................................E-31
Installing.............................................................................................................E-31
Removing ........................................................................................................... E-31
Handling microSIM Cards ............................................................................E-32
Installing.............................................................................................................E-32
Removing ........................................................................................................... E-33
Resetting the Handheld Terminal ................................................................E-34
Performing a Full Reset (Initialization) ............................................................ E-34
Warning Label ...............................................................................................E-36
IT-G500 Specifications ................................................................................E-37
Using the USB Cradle (HA-P60IO), Ethernet Cradle (HA-P62IO),
Cradle-type Battery Charger (HA-P30CHG) ...............................................E-45
General Guide .................................................................................................... E-45
Connecting the Cradle Power Supply ................................................................E-47
Ethernet Cradle Specications (HA-P62IO) ......................................................E-49
USB Cradle Specications (HA-P60IO)............................................................E-50
Cradle-type Battery Charger Specications (HA-P30CHG) ............................. E-51
Using the Dual Battery Charger (HA-D32DCHG) .......................................E-52
General Guide .................................................................................................... E-52
Charging a Battery Pack.....................................................................................E-54
Connecting Multiple Dual Battery Chargers......................................................E-55
Specications ..................................................................................................... E-56
Using the microUSB .....................................................................................E-57
Connecting to a Computer .................................................................................E-57
Using Rechargeable Battery Packs ............................................................E-58
Battery Pack Specications ................................................................................E-58
Large-capacity Battery Pack Specications .......................................................E-58
Safety Precautions
Congratulations upon your selection of this CASIO product. Be sure to read the
following Safety Precautions before trying to use it for the rst time.
Your neglect or avoidance of the warning and caution statements in the
subsequent pages causes the danger of re, electric shock, malfunction and
damage on the goods as well as personal injury.
Markings and Symbols
The following are the meanings of the markings and symbols used in these Safety
Precautions.
Danger
Warning
Caution
A diagonal line indicates something you should not do. The symbol shown
•
here indicates you should not try to take the unit apart.
A black circle indicates something you should do. The symbol shown here
•
indicates you should unplug the unit from the wall outlet.
This symbol indicates information that, if ignored or applied
incorrectly, creates the danger of death or serious personal injury.
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of death or serious personal
injury.
This symbol indicates information that, if ignored or applied
incorrectly, creates the possibility of personal injury or property
damage.
Disassembly and Modification
Never try to disassemble or modify the Handheld Terminal and its options
•
including battery pack and battery in any way.
Abnormal Conditions
Should the Handheld Terminal and/or its options including battery pack and
•
battery become hot or start to emit smoke or a strange odor, immediately turn
off the power and contact your dealer or distributor whom you purchased the
product from, or an authorized CASIO service provider.
Warning
E-3
E-4
Warning
Dust and Moisture
Though the Handheld Terminal is dust and waterproof resistant, its options
•
including the battery pack are not. Keep loose metal objects and containers
lled with liquid away from your Handheld Terminal and the options. Also,
never handle the Handheld Terminal and the options while your hands are
wet.
Laser Light
The laser scanner models (model dependant) with the integrated laser
•
scanning module scan bar codes using laser light. Never look directly into
the laser light or shine the laser light into the eyes.
Warning
Interference with the Operation of Other Equipment
(Using Wireless Data Communication)
Keep your Handheld Terminal well away from anyone wearing a
•
pacemaker. Radio waves emitted by the Handheld Terminal can affect the
operation of a pacemaker.
Before the use in aircraft, be sure to consult with cabin crew for interference
•
the Handheld Terminal emits.
Before the use in medical facility, be sure to consult with the facility
•
management or the manufacture of a specic medical equipment that the
Handheld Terminal may interfere with.
Do not use the Handheld Terminal nearby gas pump or chemical tank or any
•
other places ammable or explosive.
Foreign Objects
Take care to ensure that metals or combustible objects are not inserted into
•
the openings of the Handheld Terminal or its options, and not to allow
moisture to get inside of them.
Location
Install the cradle properly on a at and stable surface so that it cannot fall
•
down onto oor.
LCD Screen
Never apply strong pressure to the screen or subject it to strong impact.
•
Doing so can crack the LCD Screen.
Low Temperature Burn
Avoid prolonged contact with the skin while the Handheld Terminal is
•
switched on. Some areas on the back of the Handheld Terminal may
become hot during use and could cause low-temperature burns.
Caution
Optional Lithium-ion Battery Pack
Danger
Never use the Handheld Terminal and its option including the battery pack
•
and battery next to open ame, near a stove, or any other area exposed to
high heat, or leave them for a long period of time in a vehicle parked in
direct sunlight.
Never use the battery pack with any device other than the Handheld
•
Terminal.
Never dispose of the battery pack by incinerating it or otherwise expose it
•
to heat.
Never transport or store the battery pack together with metal objects that
•
may result in shorting positive (+) and negative (–) terminals of the battery
pack. Be sure to place the battery pack in its case whenever transporting or
storing it.
Never throw the battery pack or otherwise subject it to strong impact.
•
Never pierce the battery pack with nails, hit it with a hammer, or step on it.
•
Use only the specied battery charger to charge the battery pack.
•
Warning
Never place the battery pack in a microwave oven or any other high-voltage
•
device.
If the amount of time period the battery pack can serve becomes
•
considerably short even after it has been fully charged for the specied time
period, stop using it.
Should the battery pack start to leak or emit a strange odor, immediately
•
move it away from any ame nearby. Leaking battery uid is combustible.
Should uid from the battery pack accidentally get into your eyes or on the
•
skin, do not rub it. Immediately rinse it off with clean tap water and then
consult a physician.
Caution
Replace only with the same type of battery pack recommended by CASIO.
•
Dispose of used battery packs according to the local regulation.
Keep the battery pack out of the reach of small children.
•
Risk of explosion if battery is replaced by an incorrect type. Dispose of
•
used batteries according to the instructions.
E-5
Power Supply / AC Adaptor
Do not use the Handheld Terminal at a voltage other than the specied voltage.
•
Also, do not connect the Handheld Terminal to a multi-plug power strip.
Never modify, sharply bend, twist, or pull on the power cord.
•
Never use a detergent to clean AC adaptor and its power cable, especially on the
•
plug and the jack.
Do not use an AC adaptor with a bent connector.
•
Do not twist or wrench the connector.
•
When using the battery chargers and the cradles, be sure to use the respective
•
AC adaptors.
Never pull on the power cord when unplugging it. Always hold the plug when
•
unplugging it from the wall outlet.
Never touch the plug while your hands are wet.
•
Be sure to unplug the power cord from the wall outlet before cleaning the
•
battery chargers and the cradles.
Unplug the power cord from the wall outlet whenever leaving the battery
•
chargers and the cradles unattended for a long period.
The housing of the AC adaptor can become warm during normal use.
•
At least once a year, unplug the AC adaptor from the wall outlet and clean any
•
dust that builds up between the prongs of the plug.
Dust built up between the prongs can lead to the danger of re.
Check that the connector is properly oriented and then push it straight in (do not
•
insert upside down).
Do not allow uids or foreign objects to get into the AC adaptor.
•
Choose a location where the power cord is readily accessible and can be easily
•
plugged in and unplugged.
When using the AC adaptor, always use a power outlet with the specied power
•
supply and voltage, and ensure that the power plug is inserted into the socket
fully and securely.
Warning
Caution
Backup of All Important Data
Note that CASIO Computer Co., Ltd. shall not be held liable to you or any third
•
party for any damages or loss caused by deletion or corruption of data due to
use of the Handheld Terminal, malfunction or repair of the Handheld Terminal
or its peripherals, or due to the batteries going dead.
The Handheld Terminal employs electronic memory to store data, which means
•
that memory contents can be corrupted or deleted if power is interrupted due
to the batteries going dead or incorrect battery replacement procedures. Data
cannot be recovered once it is lost or corrupted. Be sure to make backup of
all important data. One way to do this is to use the separately sold cradles to
transfer data to a computer.
E-6
Caution
Operating Precautions
Your Handheld Terminal and its options are precision. Improper operation or rough
handling can cause problems with data storage and other problems. Note and observe
the following precautions to ensure proper operation.
Do not continue using the battery once it is exhausted.
•
Doing so could result in data loss or corruption. When the battery is exhausted,
replace it immediately.
Stop or avoid using the Handheld Terminal and its options in areas and
•
conditions subject to the following.
— Large amounts of static electricity
— Extreme heat or cold or humidity
— Sudden temperature change
— Large amount of dust
— After large amount of rain or water falls on the Handheld Terminal
— Pressing the screen or keys with excessive force when using in the rain
Do not use volatile chemical substances such as thinners, benzene or toiletries to
•
clean the Handheld Terminal.
When the Handheld Terminal is dirty, wipe it clean with a soft, dry cloth. Rubbing
with excessive force could scratch the display.
The power-supply terminals and Data Communication terminals should be
•
cleaned from time to time using an implement such as a dry cotton bud.
Soiling on the terminals may cause connection defects.
Take care when using chemicals.
•
Applying thinners, gasoline, kerosene, solvents or oils, or substances such as cleaners,
adhesives, paints, medications or toiletries that contain those materials, to the plastic
case or cover may cause discoloration or other damage.
Dead Pixels
•
The LCD panel employed in this product uses high precision and substantial number
of components which commonly cause a small number of the pixels not to light or
to remain lit all the time. This is due to the characteristics of LCD panel yield in
accuracy over 99.99% and permissible.
802.11a/n Restrictions
•
— This product is for indoor use only when using channels 36, 40, 44, 48, 52, 56, 60,
or 64 (5150-5350 MHz).
— To ensure compliance with local regulations, be sure to select the country in which
the access point is installed.
E-7
E-8
Lithium-ion Battery Pack
•
Each lithium-ion battery pack has its life. The life span heavily depends on how the
battery pack is charged or stored which may cause deterioration of the battery pack
to shorten the life span if it is handled improperly. Note the tips below to make the
battery pack last long.
— Be sure to charge the battery pack before using it if the battery pack is used for the
rst time or if it has not been used for a long period of time. When charging the
battery pack, continue charging until the charge LED lights green (fully charged).
— If the battery pack is repeatedly charged, the life span becomes short. To avoid the
repetition of charging the battery pack, be sure that the remaining capacity is low
before you start charging.
— Be sure to charge the battery pack in recommended temperature range. The
temperature range is dependant on device you use to charge including battery
chargers and tablets. Refer to the respective user guides. Charging the battery pack
in a temperature outside of the recommended range causes deterioration.
— When used at low temperatures, the battery pack has a reduced capacity and will
supply power for shorter time. The life span of the battery pack is also shortened.
— Charging the battery pack while the battery pack itself is freeze including inside
causes deterioration. Be sure to resume an ordinary room temperature on the battery
pack and then leave it unattended for approximately one hour before charging.
— After charging the battery pack, if the performance of the battery pack does not show
any recovery, it is a sign of ending the life. Replace it with a new battery pack.
— Avoid the battery pack with a full of the capacity to store for a long period of
time. If you need to store it for a long period, be sure that the remaining capacity
is 30 to 50 percent and to store in a moderate low temperature. This can reduce
deterioration.
— The battery pack gradually deteriorates over time. In particular, storing (or using)
the fully charged battery pack at high temperatures tends to accelerate battery pack
deterioration.
Regulatory Information
Europe
IT-G500
Options of IT-G500
Please keep all information for future reference.
•
The declaration of conformity may be consulted at http://doc.casio.com/
•
Products are for distribution within all member states of the EU.
•
Options of IT-G500 are HA-P60IO, HA-P62IO, HA-P30CHG, HA-D32DCHG, HA-D20BAT-A
•
and HA-D21LBAT-A.
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
Casio Europe GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
www.casio-europe.com
About the Waterproofing/Dustproofing
The IT-G500 Series models are waterproof and dustproof.
Waterproong: Performance complies with the IPX7 level set out in the IEC standards
•
(waterproof for 30 minutes at a depth of 1 meter in still tap water at normal temperature).
Dustproong: Performance complies with the IP6X level set out in the IEC standards.
•
IP (International Protection) is the standard for splash- and dust-proofing for electrical
products set out in the International Electrotechnical Commission (IEC) standard 60529.
Important!
The water- and dust-proong performance of this product is based on CASIO testing
procedures. Note also that this performance applies to the product at the time of
shipment (delivery to the customer) and is not guaranteed inclusive of the environment
in which the product is used. The warranty does not apply to any situation where the
product is immersed during use, and as with any other electrical product, great care
should be taken when using this product in the rain or similar situation.
Precautions When Using this Product
•
— Check that there is no dust, sand or other foreign matter on the battery pack cover,
microSD card slot cover or microUSB port/earphone-microphone jack cover, or
on the respective contact surfaces. If any soiling is found, wipe it off with a clean,
soft, dry cloth. Even very small amounts of soiling trapped on the contact surfaces
(a single hair or grain of sand, etc.) can cause water to leak into the device.
— Check that the waterproof seals on the battery pack cover and microSD card slot
cover are free from cracks and other damage.
— Close the battery pack cover lock switch rmly until the switch is in the locked position.
—
Avoid opening and closing the battery pack cover or microSD card slot cover in locations
near water or exposed to sea breezes, and do not open or close them with wet hands.
— Do not drop this product or leave it in locations exposed to temperatures outside
the specied range. Doing so could impair its water- or dust-proong.
Other Precautions
•
— The accessories for this product (battery pack, etc.) and optional products are not
water- or dust-proof.
—
Subjecting this product to a severe impact could render it no longer water- or dust-proof.
— If any water leaks into the product as a result of carelessness or inattention during
product handling, CASIO cannot be held liable for compensation for any damage
to internal components (battery, recording media, etc.) or for the costs of recorded
content or the recording thereof.
— CASIO COMPUTER CO., LTD. accepts no other liability whatsoever for any
accident that occurs due to water leakage.
E-9
Important
This guide does not include any information about programming and download procedures.
•
See the applicable separate documentation for information about the procedures.
After Service
Should this product ever malfunction, contact your original retailer providing information
•
about the product name, the date you purchased it, and details about the problem.
Accessories and Options
Handheld Terminal
IT-G500 Series
Accessories
Please check the items in the box before using the Handheld Terminal
for the first time.
• Neck Strap
• Hand belt (installed in the Handheld Terminal)
• Stylus
• Stylus String
• Large-capacity Battery Pack Cover
• User’s Guide
Options
• USB Cradle HA-P60IO
• Ethernet Cradle HA-P62IO
• Cradle-type Battery Charger HA-P30CHG
• Dual Battery Charger HA-D32DCHG
• microUSB Cable (
HA-N81USBC
• USB Cable (Cradle-computer connection) DT-380USB-A
• AC Adaptor for Ethernet Cradle/Dual Battery Charger
AD-S42120C
• AC Adaptor for USB Cradle/Cradle-type Battery Charger
AD-S15050B
• Battery Pack HA-D20BAT-A
• Large-capacity Battery Pack HA-D21LBAT-A
• Flat battery cover (for battery pack (HA-D20BAT-A)) HA-P22FBC
• Screen Protect Sheet HA-P90PS5
Handheld terminal-computer connection
)
E-10
• Power Cord AC-CORD
General Guide
16
17
16
16
17
16
18
19
20
12
15
14
13
11
10
4
1 2 3
5
66
7
8
9
21
22
23
24
25
26
27
28
29
25
30
30
28
27
31
32
33
34
Handheld Terminal (IT-G500)
Top
IT-G500-C16E
IT-G500-GC16E
*
Left
Battery Compartment
IT-G500-15E
IT-G500-G15E
IT-G500-C26E
IT-G500-GC26E
Front
Back
IT-G500-25E
*
Right
Bottom
*The illustration shows the IT-G500-C16E.
E-11
1 Receiver*1 Outputs voice sound.
2 Indicator 1 Orange: Charging
Green: Charging complete
Red: Battery pack error or the surrounding temperature is out of
the charging temperature range.
3 Indicator 2 Flashes blue when operating via Bluetooth or orange when
operating via W-LAN, GPS or W-WAN. Lights red when there
is a bar code scanning error and lights green when a bar code
scans successfully.
Lights red when the alarm function is activated.
4 Screen The screen displays texts, operations, indicators and so forth. In
addition, operations can be performed and data can be input on
the screen using stylus.
5 Center Trigger Key Used to perform bar code reading. Can be assigned an arbitrary
function.
6 Function Keys Used when starting a pre-registered application.
7 Power Key Turns the power on and off.
8 Enter Key Press when nishing entering numerical values or when moving
to the next step.
9 Mode Key The key switches the character input mode, either characters in
lowercase letter or characters in uppercase letter.
10 Fn Key Used to make various settings in combination with the function
keys or numeric keys or when starting a pre-registered
application.
11 CLR Key Used to clear one letter to the left of the cursor.
12 Microphone*1 Used for audio input (including voice).
13 Speaker Generates audio and buzzer tones.
14 Numeric Keys Used to enter numeric values and decimal points.
15 Cursor Key Perform the same functions as the up and down arrow keys on a
PC keyboard.
16
Barcode Reader
17 NFC Reader *2 Holding a contactless IC card up to this reader allows data to be
18 microUSB Port For connecting to microUSB cable (HA-N81USBC).
19 Headset Jack Used to connect an earphone-microphone headset.
20 L Trigger Key Used to perform bar code reading.
21
microSD Card Slot
22 R Trigger Key Used to perform bar code reading.
23 Camera Lens *2 Takes photos.
Laser light or LED light is emitted from this window that reads
bar codes.
read from and written to the card.
microSD card slot.
E-12
24 LED *2 Used for taking photos.
25 Hand Belt Mount Used to attach the hand belt.
26 Hand Belt It is used to hold the terminal or to carry it.
27 Battery Pack Cover
Lock Switches
28
Cradle Mount Holes
29 Battery Pack Cover Used to cover the battery compartment that holds the battery
30 Strap Holes Used to attach neck strap and hand belt.
31 Stylus It is used to operate the terminal or to input data.
32 Reset Switch Used to reset the Handheld Terminal.
33 microSIM Card
Slot (for IT-G500GC26E/GC16E/
G15E)
34 Power
Supply/Data
Communication
Terminals
*1. Excluding the IT-G500-15E/25E.
*2. Excluding the IT-G500-15E/25E/G15E.
Used to lock the battery cover and to release.
These holes hold the terminal seating in the optional cradle or
in the cradle-type battery charger.
pack inside.
microSIM card slot. Remove the battery pack to load and
unload microSIM card.
Used for USB communication or to supply power to the
terminal and to charge the battery pack via either Cradle or
Cradle-type Battery Charger.
E-13
Loading and Removing the Battery Pack
Your Handheld Terminal uses two types of battery: a battery pack and a memory
backup battery.
The battery pack is used to power normal operations and to store data, while the
memory backup battery provides the power required to maintain memory contents
when the battery pack power is unable to supply power for some reason.
You can choose either battery pack (HA-D20BAT-A) or large-capacity battery pack
(HA-D21LBAT-A) for operating power.
The backup battery is installed inside of the Handheld Terminal.
This guide uses the following terms to refer to the batteries.
Battery Pack: Rechargeable battery pack (HA-D20BAT-A or HA-D21LBAT-A) for
Backup Battery: Built-in battery for memory backup
When the battery pack power goes low, immediately charge it or replace it with a
charged battery pack.
You can use the Dual Battery Charger, the Cradle-type Battery Charger, the USB
Cradle, or the Ethernet Cradle to charge a battery pack installed in the terminal. See the
relevant sections in this guide for the respective options about how to use.
Important!
Always keep backup of all important data!
The battery pack powers normal operation and also provides power required to
•
maintain memory contents, while the backup battery provides backup power to
maintain memory contents. Because of this, you should not remove the battery
pack if the backup battery is dead. Removing the battery pack while the backup
battery is dead causes data in the memory to be corrupted or lost. Note that once
data is lost it cannot be recovered. Always keep backup of all important data.
The charge of a battery pack when you purchase it may be depleted due to
•
testing at the factory or natural discharge during shipment and storage. Be sure
to charge the battery pack before you use it.
The life of a battery pack is limited, and charging a battery pack causes it to
•
gradually lose its ability to maintain the charge. If your battery pack seems to require
charging very frequently, it probably means it is time to purchase a new one.
If a battery pack is used past the end of its service life, it may swell up in size. In
•
such a case, replace the battery pack with a new one.
If the backup battery is fully charged, it will maintain the contents of the
•
terminal's memory (RAM) for approximately 4 minutes when the main battery
pack is removed.
It takes 4 days with the main battery pack installed in the terminal for the
•
backup battery to be charged fully.
Loading
1. Turn the Handheld Terminal over.
normal operations and data storage
Tip!
You can load and remove the battery
pack with the hand belt still attached.
2. Turn the battery pack cover lock
switches to the “FREE” position and
remove the battery cover.
E-14
3. Load the battery pack. Note the battery
polarity (+/ -). Take care also to load the
battery pack so that the removal tape
extends above the battery.
Replace the battery pack cover and turn
4.
the cover lock switches to the “LOCK”
position, as shown in the illustration.
When loading the high-capacity battery
pack, be sure to use the high-capacity
battery pack cover.
This precaution also applies when using
the optional at battery cover.
Tip!
When attaching the battery pack cover, take care to ensure that the end with “FREE”
and “LOCK” markings faces the lock switches.
Removing
1. Make sure that the Handheld Terminal is turned off.
If the power is on, press the power key to turn it off.
Turn the battery pack cover lock
2.
switches on the back of the Handheld
Terminal to the “FREE” position and
remove the battery pack cover.
Remove the battery pack by pulling
3.
up the removal tape as shown in the
illustration.
Important!
When removing the battery pack, make sure you do not leave the Handheld
•
Terminal without a battery pack for more than about 4 minutes. Doing so can
cause data in the memory to be deleted.
When removing the battery pack, be sure you carefully follow the proper
•
procedure as explained in this guide.
Never try to use other type of battery than the ones that are specied for this
•
product.
When removing the battery pack, pull the removal tape straight up and remove
•
the battery pack. Removing with excessive force can damage the battery pack.
E-15
Charging the Battery Pack
Battery pack installed in the terminal can be charged using either cradle or battery
charger. Battery charge condition can be monitored with Indicator 1 on the terminal.
Multiple battery packs can also be charged simultaneously using Dual Battery Charger.
USB Cradle/Ethernet Cradle/Cradle-type Battery Charger
AC adaptor AD-S42120C for
Ethernet Cradle
AC adaptor AD-S15050B
for USB Cradle/Cradle-type
Battery Charger
Ethernet Cradle, USB Cradle only
Status of Indicator 1 on IT-G500:
Orange: Charging
Red: Standby due to battery pack error or the surrounding temperature is out of the
Green: Charging complete
Important!
•
•
charging temperature range
(charging begins when the temperature is within the charging temperature range)
Take care not to trap objects such as the neck strap in the cradle.
The data communication terminal should be cleaned from time to time using an
implement such as a dry cotton bud.
Soiling or dust buildup could cause connection problems.
Dual Battery Charger
Taking care that the battery pack is oriented correctly, insert it into the Dual Battery Charger.
This causes the Charge Indicator LED to light in red, indicating that charging has started.
AD-S42120C
You can connect up to three Dual Battery Chargers.
Status of Charge Indicator LED
Off: Not charging
Red: Charging
Red Flashing: Battery pack problem
Green: Charging complete
Green Flashing: Standby due to the surrounding temperature being beyond the
specied temperature range (Approximately 0°- 40°C) (charging
resumes when the temperature reaches the range.)
E-16
Handling the Hand Belt
The hand belt is attached to the Handheld Terminal. Remove the hand belt when it is
not needed.
To remove the hand belt
1. As shown in the illustration, hold down
the raised section on the Handheld
Terminal as you pull off the hand belt
buckle.
2. Peel off the hook and loop fastener and
pull the hand belt back through the slot
at the bottom of the battery pack cover.
To attach the hand belt
1. Feed the end of the hand belt through
the slot at the bottom of the battery pack
cover, fold it back and secure it at a
suitable length using the hook and loop
fastener.
2.
As shown in the illustration, align the
hand belt buckle with the attachment
position on the Handheld Terminal and
press the buckle into place.
Check that the buckle is tted securely.
Tip!
Holding the Handheld Terminal as
shown in the gure will make it easier to
use.
E-17
Loading...